Polycom DOC2231A manual Unpacking and Positioning the MGC+100, MGC+100 package

Chapter 2 - Hardware Installation

Unpacking and Positioning the MGC+100

To unpack and position the MGC+100:

1.When you receive your MGC+100, inspect the equipment for damage and verify that the components match the packing slip. If you did not receive a component or if there is damage to the system, notify your service representative immediately.

Wood Packing Case

Carrying Strap

Lock in Closed Position

Lock in Open Position

Figure 2-1: MGC+100 package

2.Place the MGC+100 unit on a stable flat surface in a location that meets the MGC+ environment requirements, which are:

—Operating temperature: 10°–40°C (50°–104°F) or 10°–35°C (50°–95°F) when installed in a 19” rack

—Humidity: 15%–90% non-condensing

—Altitude: Up to 3,000m (10,000ft)

—ESD: +8 kV

2-4