Chapter 7 - Defining a New Video Conference
4.In the Entry Queue Service box select a predefined Entry Queue Services that will be used to play voice messages and prompts to participants waiting in the Entry Queue. Leave this field blank to use a default Entry Queue Service, if one is defined.
5.In the Target Conferences area:
a.Select the IP Only check box to create an IP Only Entry Queue, whose target conferences are IP Only conferences and will enable the connection of IP participants only.
b.To create an encrypted Entry Queue, select the Encryption check box. For details about Encryption and encrypted Entry Queues, see the MGC Manager User's Guide, Volume II, Chapter 1.
c.Select Video Switching, Transcoding or Continuous Presence as the session type. For more information, see Chapter 4, “Video Conference Attributes” on page
•Setting the Entry Queue to Transcoding or Continuous Presence requires Video resources, while a Video Switching Entry Queue does not.
•An IP Only Entry Queue set to Continuous Presence mode can only be defined as Classic and not as Software or Quad Views.
6.Select the Line Rate in which participants can connect to the conference. In Continuous Presence conferences, participants can connect using a lower line rate. If this Entry Queue will be used to access Conferences On Port, define the Line Rate as described in step 17 of “Creating an On Going Video Conference” on page
7.Leave all the video and audio parameters set to Auto to let the system select the appropriate settings. For a detailed description, see MGC Manager User’s Guide, Volume II, Chapter 2.
8.Define the
9.Click OK.