Figure
¾Line: Connect to the Modem Port of Splitter or to the telephone line.
¾Reset Button: There are two ways to reset the Router's factory defaults.
1)Use the Restore Default function on Management
2)Use the Factory Default Reset button: Press the Reset button for more than five seconds and then wait for the router to reboot.
¾1, 2, 3, 4 (LAN): Through these ports, you can connect the Router to your PCs and the other Ethernet network devices.
¾Power: The Power plug is where you will connect the power adapter.
¾Antenna: Used for wireless operation and data transmit.
2.4System Requirements
¾Make sure your computer has a Networking Interface Card (wired or wireless) before connecting the Router to your computer.
¾An operating system supporting the TCP/IP protocol.
¾Broadband Internet Access (ADSL).
¾Web browser, such as Microsoft Internet Explorer 5.0 or later, Netscape Navigator 6.0 or later.
2.5Installation Environment Requirements
¾The Router should not be located where it will be exposed to moisture or excessive heat.
¾Place the Router in a location where it can be connected to the various devices as well as to a power source.
¾Make sure the cables and power cord are placed safely out of the way so they do not create a tripping hazard.
¾Designed to go up to 100 meters indoors and up to 300 meters outdoors for wireless connection.
¾The Router can be placed on a shelf or desktop.
4