TP-Link TD-W8910GB manual To remove a static routing entry, Rip

Page 52

TD-W8910GB54M Wireless ADSL2+ Router User Guide

2.Enter the following data:

¾Destination Network Address: The Destination Network Address is the address of the network or host that you want to assign to a static route.

¾Subnet Mask: The Subnet Mask determines which portion of an IP Address is the network portion, and which portion is the host portion.

¾Gateway IP Address: If the Use Gateway IP Address checkbox is selected, you should type the Gateway address exactly in the text box, or else, the default Gateway address will be adopted for the Static Route.

¾Use Interface: If the Use Interface checkbox is selected, you should select the Interface name in the text box, or else, the default Use Interface will be adopted for the Static Route.

3.Click the Save/Apply button to save it.

To remove a static routing entry:

1.Select the Remove check box according to the entry in the Figure 4-36.

2.Click the Remove button, and the entry will be deleted.

)Note:

Default Gateway IP address should be specified since MER Interface is selected.

4.4.7.3. RIP

Choose “Advanced Setup”Æ“Routing”Æ“RIP”, you can see the RIP (Routing Information Protocol) screen, this screen allows you to configure the RIP (shown in Figure 4-38).

Figure 4-38

To activate RIP for the device, select the Enabled radio-button for Global RIP Mode. To configure an individual interface, select the desired RIP version and operation, followed by placing a check in the Enabled checkbox for the interface.

If you are sure about the settings, click the Save/Apply button to save the configuration.

45

Image 52
Contents TD-W8910GB 54M Wireless ADSL2+ Router Copyright & Trademarks FCC RF Radiation Exposure Statement CE Mark WarningNational Restrictions 2400.0-2483.5 MHz Country Restriction Reason/remarkPackage Contents Contents Appendix B Appendix aTD-W8910GB Main Features WirelessProduct Overview Overview of the RouterSupporting Protocol Transmit Data-rateHardware Installation Guide Front PanelLED Explanation Back PanelInstallation Environment Requirements System RequirementsConnecting the Router Best Location for Wireless Network ConnectionWired network connection Connect Adsl LineHub or Switch to Router Connection Computer to Router ConnectionQuick Installation Guide Configure PCTD-W8910GB54M Wireless ADSL2+ Router User Guide TD-W8910GB54M Wireless ADSL2+ Router User Guide If the TCP/IP configuration for your PC is correct? Configure the Router TD-W8910GB54M Wireless ADSL2+ Router User Guide TD-W8910GB54M Wireless ADSL2+ Router User Guide TD-W8910GB54M Wireless ADSL2+ Router User Guide Basic Router Configuration LoginDevice Info Advanced Setup Quick Setup1 WAN Follow the instructions below to Add or Edit an ATM PVC TD-W8910GB54M Wireless ADSL2+ Router User Guide Configuration will be described in 5.4.5 Quality of Service 4to configure them again PPPoATD-W8910GB54M Wireless ADSL2+ Router User Guide PPPoE MERTD-W8910GB54M Wireless ADSL2+ Router User Guide IPoA Bridge 2 LAN TD-W8910GB54M Wireless ADSL2+ Router User Guide MAC Clone 4 NAT Virtual ServersTo setup a virtual server entry TD-W8910GB54M Wireless ADSL2+ Router User Guide Port Triggering To add a new Port TriggeringDMZ Host To add a new DMZ Host SecurityALG Setup an Outgoing IP Filtering rule IP FilteringTD-W8910GB54M Wireless ADSL2+ Router User Guide Setup an Incoming IP Filtering rule To setup a MAC Filtering rule MAC FilteringTo setup a Parental Control rule Parental ControlQuality of Service TD-W8910GB54M Wireless ADSL2+ Router User Guide Routing Static Route To add static routing entriesTo remove a static routing entry RIP8 DNS DNS ServerTo setup DDNS, follow these instructions Dynamic DNS9 DSL Port Mapping TD-W8910GB54M Wireless ADSL2+ Router User Guide Wireless LAN Configuration Wireless BasicWireless Security WEP EncryptionConfigure WEP Encryption WPA Configure WPA settings Configure WPA-PSK settings WPA-PSKWPA2 WPA2-PSK Mixed WPA2/WPAWireless -- MAC Filter Mixed WPA2/WPA-PSKWireless Advanced Form of MAC Address must be xxxxxxxxxxxx, like 00130A55FF09TD-W8910GB54M Wireless ADSL2+ Router User Guide Diagnostics Wireless StatisticsSettings BackupTo back up the Router’s current settings ManagementUpdate To update the Router’s settings System LogTo Configure the System Log Settings To View the System LogInternet Time 4 TR-069 client To set the Router’s timeRPC- Remote Procedure Calls Access Control ServicesPasswords To add the IP AddressUpdate Software To change the passwordReboot To update the Routers softwareAppendix a Glossary TD-W8910GB54M Wireless ADSL2+ Router User Guide TD-W8910GB54M Wireless ADSL2+ Router User Guide TD-W8910GB54M Wireless ADSL2+ Router User Guide Appendix B Specifications LED LAN/WAN