TP-Link TD-W8910GB manual 2 LAN

TD-W8910GB54M Wireless ADSL2+ Router User Guide

The information of the figure shows above is same as the information in the Figure 4-3.

4.4.2LAN

Choose “Advanced Setup”Æ“LAN”, and you will see the LAN screen (shown in Figure 4-14)，the section allows you to configure the Router’s LAN ports settings.

Figure 4-14

¾IP Address: You can configure the Router’s IP Address and Subnet Mask for LAN Interface.

„IP Address: Enter the Router’s local IP Address, then you can access to the Web-based Utility via the IP Address, the default value is 192.168.1.1.

„Subnet Mask: Enter the Router’s Subnet Mask, the default value is 255.255.255.0.

¾Enable UPnP: If you need the UPnP function, select the check box to enable it.

¾Enable IGMP Snooping: If you select the option, please choose the IGMP Mode: Standard Mode or Blocking Mode.

27