TD-W8910GB 54M Wireless ADSL2+ Router User Guide
Figure
If you want to specify the MAC address of
4.4.4NAT
When you select PPPoA or PPPoE for the WAN Setup, or when you select Enable NAT (shown in Figure
Figure
Choose “Advanced Setup”Æ“NAT”, there are four submenus under the main menu: Virtual Servers, Port Triggering, DMZ Host and ALG. Click any of them, and you will be able to configure the corresponding function.
4.4.4.1. Virtual Servers
Choose “Advanced Setup”Æ“NAT”Æ“Virtual Servers”, you can set up virtual servers on the screen below (shown in Figure
Virtual servers can be used for setting up public services on your LAN, such as DNS, Email or FTP. A virtual server is defined as a service port, and all requests from the Internet to this service port will be redirected to the computer specified by the server IP. Any PC that was used for a virtual server must have a static or reserved IP Address because its IP Address may change when using the DHCP function.
30