TP-Link TD-W8910GB manual Security, To add a new DMZ Host, Alg

TD-W8910GB54M Wireless ADSL2+ Router User Guide

Figure 4-21

To add a new DMZ Host:

You can enter the computer's IP address and then click Save/Apply to activate the DMZ host you set on this page.

)Note:

DMZ host forwards all the ports at the same time. Any PC whose port is being forwarded must have its DHCP client function disabled and should have a new static IP Address assigned to it because its IP Address may change while using the DHCP function.

4.4.4.4. ALG

Choose “Advanced Setup”Æ“NAT”Æ“ALG”, you can Enable SIP (Session Initiation Protocol) on the ALG (Application Level Gateway) screen (shown in Figure 4-22).

Figure 4-22

4.4.5Security

When you select the Enable Security function (shown in Figure 4-10)for the connection type of MER or IPoA for the WAN Setup, or when you setup Bridge, PPPoA or PPPoE mode for WAN interface, you will see the Security menu in the Web-based Utility (shown in Figure 4-23). It includes IP Filtering, MAC Filtering (only effective in Bridge mode) and Parental Control submenus.

35