TP-Link manual TD-W8910GB54M Wireless ADSL2+ Router User Guide

TD-W8910GB54M Wireless ADSL2+ Router User Guide

Figure 4-4

1.Follow the instructions below to configure the ATM PVC on the screen (shown in Figure 4-4). Make sure you have the necessary information before you configure it.

1)Enter the VPI and VCI values provided by your ISP, they should not be changed unless you have been instructed to change it by your ISP.

2)Select the type of the service assigned by your ISP in the drop-down list. The default type is UBR Without PCR.

3)If you want to adopt QoS (Quality of Service) for the connection, please select the Enable Quality Of Service check box.

4)Click the Next button for the further configuration in the next screen (shown in Figure 4-5), or else click the Back button to go to the previous screen.

)Note:

Enabling packet level QoS for PVC improves performance for selected classes of applications. While QoS consumes system resources; therefore the number of PVC(s) will be reduced. Besides this, it cannot be set for the connection type of CBR and Real-time VBR. If you select the QoS service, the Quality of Service menu will be added to the Web-based Utility, the detailed

19