TP-Link manual TD-W8901N 150Mbps Wireless N ADSL2+ Modem Router User Guide

TD-W8901N150Mbps Wireless N ADSL2+ Modem Router User Guide

as follows. Presume the rules are both aimed at the interface PVC0, and their indexes are (1, 1), (1, 2) and (1, 3).

Step 1: Select the “IP/MAC Filter” as the Filter Type Selection (show in Figure 4-39).

Select the “IP” as the Rule Type on the Filter screen, then you can configure the specific rule for the example.

Step 2: Select the IP/MAC Filter Set Index and IP/MAC Filter Rule Index for the rule, then select the Interface “PVC0”, and select the Direction “Both” for the first rule.

)Note:

If you want to make the rule take effect, please select Yes to active the rule.

Step 3: Enter the “Source IP Address”, “Destination IP Address”, “Subnet Mask” and “Port Number” in the corresponding field.

Step 4: Select the Protocol as “TCP” and select the Unmatched rule as “Next”.

Step 5: Finally, click the SAVE to save the entry.

56