4.6.2 Time Zone
Choose “Maintenance→Time Zone”, you can configure the system time in the screen (shown in Figure
The system time is the time used by the device for scheduling services. There are three methods to configure the time. You can manually set the time or connect to a NTP (Network Time Protocol) server. If a NTP server is set, you will only need to set the time zone. If you manually set the time, you may also set Daylight Saving dates and the system time will automatically adjust on those dates.
1)NTP Server automatically
Select NTP Server automatically as the Synchronize time, you only need to set the time zone.
Figure
)Note:
The ADSL Router
2)PC’s Clock
Select PC’s Clock as the Synchronize time, you don’t need to set any items.
66