Prestige 641 ADSL Internet Access Router
Menu 11.2 - Remote Node PPP Options
Encapsulation= Standard PPP
Compression= No
Press ENTER to CONFIRM or ESC to CANCEL:
Press Space Bar to Toggle.
Figure 4-3 Menu 11.2 - Remote Node PPP Options
The following table describes the Remote Node PPP Options Menu, and contains instructions on how to configure the PPP options fields.
Table 4-2 Remote Node PPP Options Menu Fields
Field | Description | Option |
|
|
|
Encapsulation | Select the CISCO PPP only when this remote node | Standard |
| is a Cisco machine; otherwise, select the Standard | PPP |
| PPP. | CISCO |
|
| |
|
| PPP |
|
|
|
Compression
Turn on/off Stac Compression. The default for this field is Off.
On/Off
(Default =
Off)
Once you have completed filling in Menu 11.2 – Remote Node PPP Options, press [Enter] at the message [Press ENTER to Confirm…] to save your configuration, or press [Esc] at any time to cancel.
4.1.5 Remote Node Filter
Use Menu 11.5 – Remote Node Filter to specify the filterset(s) to apply to the incoming and outgoing traffic between this remote node and the Prestige. You can specify up to 4 filter sets separated by comma, e.g., 1, 5, 9, 12, in each filter field. The default is no filters.
Note that spaces are accepted in this field. For more information on defining the filters, see Chapter 8 on Filter Configuration.
Remote Node Configuration |