ZyXEL Communications 641 manual TCP/IP Remote Node Configuration, Static/ Dynamic

Prestige 641 ADSL Internet Access Router

The following table shows the TCP/IP related fields in Menu 11.3 - Remote Node Network Layer

Options.

Table 5-2 TCP/IP Remote Node Configuration

Field	Description	Option
IP Address	Press the [Space Bar] to select Static or Dynamic address	Static/ Dynamic
Assignment	assignment. The following two fields are N/A for a dynamic
	address assignment.
Rem IP Address	This will show the IP address you entered for this remote node in
	the previous menu.
Rem IP Subnet	Enter the subnet mask for the remote network.
Mask
My WAN Addr	Some implementations, especially the UNIX derivatives, require
	the WAN link to have a separate IP network number from the
	LAN and each end must have a unique address within the WAN
	network number. If this is the case, enter the IP address assigned
	to the WAN port of your Prestige.
	Note that this is the address assigned to your local Prestige, not
	the remote router.
Single User	Set this field to Yes to enable the Single User Account feature for	Yes/No
Account	your Prestige. Use the space bar to toggle between Yes and No.
	See Chapter 3 - Internet Access Application for more information
	on the Single User Account feature.
Metric	The metric represents the “cost” of transmission for routing	1 to 15
	purposes. IP routing uses hop count as the measurement of cost,
	with a minimum of 1 for directly connected networks. Enter a
	number that approximates the cost for this link. The number need
	not be precise, but it must be between 1 and 15. In practice, 2 or
	3 is usually a good number.
Private	This parameter determines if the Prestige will include the route to	Yes/No
	this remote node in its RIP broadcasts. If set to Yes, this route is
	kept private and not included in RIP broadcast. If No, the route to
	this remote node will be propagated to other hosts through RIP
	broadcasts.
RIP Direction	Press the space bar to select the RIP direction from Both/In	(Default=Both)
	Only/Out Only or None.
Version=	Press the space bar to select the RIP version from RIP-1/RIP-	RIP-1(default)
	2B/RIP-2M.

5-4 Remote Node TCP/IP Configuration