Crestron electronic CP-X4014WN, CP-X3014WN Manual network connection setting Wireless LAN

1.Connection to the network

1.4Manual network connection setting - Wireless LAN - (continued)

1.4.2 Wireless LAN connection set up

Using wireless LAN utility for Windows® 7 standard.

Wireless LAN initial settings for the projector is as follows.

Connection Control	: Ad-Hoc
SSID	: wireless
Channel	: 1
Encryption rating	: None
IP address	: 192.168.10.254

*You can change these settings via a web browser on your computer or from the menu of the projector. Refer to the item 3.1.3 Network Settings (20) or NETWORK menu in the Operating Guide.

1)Select "Change adapter settings" from the menu on the left side of the "Network and

Sharing Center" window.

2)Right-click "Wireless Network Connection" to open the menu, and select "Properties".

3)Select "Internet Protocol Version 4 (TCP/IPv4)" and click [Properties].

(continued on next page)

12