Crestron electronic CP-X3014WN Alert Settings, Displays and configures failure & alert settings

Page 25

3. Web Control

3.1 Projector Web Control (continued)

3.1.6 Alert Settings

Displays and configures failure & alert settings.

Item

Description

 

 

Cover Error

The lamp cover has not been properly fixed.

Fan Error

The cooling fan is not operating.

Lamp Error

The lamp does not light, and there is a possibility that interior

portion has become heated.

 

 

 

Temp Error

There is a possibility that the interior portion has become

heated.

 

 

 

Air Flow Error

The internal temperature is rising.

Cold Error

There is a possibility that the interior portion has become

overcooled.

 

 

 

Filter Error

Filter time over.

 

Other Error

Other error.

 

If displaying this error, please contact your dealer.

 

Schedule Execution

Schedule Execution error. (

27)

Error

 

 

Lamp Time Alarm

Lamp time over Alarm Time setting.

Filter Time Alarm

Filter time over Alarm Time setting.

Transition Detector

Transition Detector Alarm. (

SECURITY menu in the

Alarm

Operating Guide)

 

 

When the projector is supplied with the power, it works as

 

below.

 

Cold Start

• If the STANDBY MODE is set to the NORMAL:the projector's

power status changes from “OFF” to “Standby state”.

•If the STANDBY MODE is set to the SAVING:the projector's power

status changes from “Standby state” to “ON (lamp is turned on)”. (SETUP menu in the Operating Guide)

Authentication Failure

The SNMP access is detected from the invalid SNMP community.

Refer to Troubleshooting in the Operating Guide for further detailed explanation of Error except Other Error and Schedule Execution Error.

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Thank you for purchasing this product FeaturesTrademark acknowledgment Connection to the network ContentsNetwork Presentation Web Control My Image Function Messeger FunctionOther Functions Network Bridge FunctionDo not USE Near the Following Security precautions when using wireless LANSystem requirements Connection to the networkSystem requirements Quick connectionThis section explains how to set it up manually Manual network connection setting Wired LANNetwork settings Equipments connectionManual network connection setting Wired LAN Setting automatically About IP address Setting manuallyInternet Option setting Preparation for wireless LAN connection Manual network connection setting Wireless LANWireless LAN connection set up Manual network connection setting Wireless LANWireless Channel Encryption rating None IP addressAbout IP address Manual network connection setting Wireless LAN Network Presentation Web Control 17 or 3.2 Crestron e-Control Web ControlProjector Web Control User name Password Administrator BlankLogon Network Information Projector Web ControlLAN DhcpAMX D.D Displays and configures network settingsDhcp on Projector Web Control Network SettingsDhcp OFF Other Setup Wired SetupCrestron e-Control Displays and configures communication port settings Port SettingsClick the Apply button to save the settings Projector Web Control Port SettingsDisplays and configures e-mail addressing settings Mail SettingsSend Test Mail Displays and configures failure & alert settings Alert SettingsAlert Items are shown below Projector Web Control Alert SettingsDisplays and configures schedule settings Schedule SettingsSchedule settings are shown below Projector Web Control Schedule SettingsProjector Web Control Schedule Settings Displays and configures the date and time settings Date/Time SettingsTime difference Projector Web Control Date/Time SettingsSntp Sntp Server AddressSnmp Security SettingsProjector Control Projector Web Control Projector Control Auto ECO Mode Setup Auto KeystoneECO Mode Standby ModeMIC Volume Audio VolumeSpeaker Audio SourceAuto Power OFF Direct Power onOption Auto Search MY BUTTON-1Service Remote Control Projector Status Displays the settings and status of the projectorRestarts the projector’s network connection Network RestartDescription Restart Only English is supported on Crestron e-Control Crestron e-ControlTab Description Log Out ToolsMain window Crestron e-ControlSources List Selects input from LAN portCrestron e-Control- Main window Crestron Control Tools windowProjector User Password Projector Configures the network settings of the projectorAdmin Password Crestron e-Control- Tools windowProjector Information Info windowHelp Desk window Emergency Alert My Image Function Messenger Function Network Bridge Function Connecting devicesLAN port USB Type a port Control port Communication port Communication setupCondition Transmission method Option menu Service Communication in the Operating GuideFULL-DUPLEX Transmission methodMail Alerts Other FunctionsMail Alerts Snmp Settings Projector Management using SnmpEvent Scheduling Event Scheduling Date/Time Settings Following two ports are assigned for the command control Command Control via the NetworkCommunication Port Command Control via the Network Reply Error code Command FormatHeader Data length RS-232Ccommand Check Sum Connection TCP #9715Reply Data format Automatic Connection Break AuthenticationCrestron RoomView Problem Likely Cause Things to Check TroubleshootingSpecifications Warranty and after-sales service
Top Page Image Contents