Crestron electronic CP-WX3014WN, CP-X4014WN, CP-X3014WN Projector Web Control Port Settings

Page 23

3. Web Control

3.1 Projector Web Control - Port Settings (continued)

	Item	Description

SNMP Port		Conﬁgures the SNMP port.
	Port open	Click the [Enable] check box to use SNMP.
		Conﬁgures the destination of the SNMP Trap in IP format.
		• The address allows not only IP address but also domain
	Trap address	name if the valid DNS server is setup in the Network
		Settings. The maximum length of host or domain name is up
		to 255 characters.
	Download MIB ﬁle	Downloads a MIB ﬁle from the projector.
Network Bridge Port		Conﬁgures the Bridge port number.
		Input the port number.
	Port Number	Except for 41794, 9715, 9716, 9719, 9720, 5900, 5500, 4352
	Port Number	between 1024 and 65535 can be set up. It is set to 9717 as
		between 1024 and 65535 can be set up. It is set to 9717 as
		the default setting.

Click the [Apply] button to save the settings.

NOTE • The new conﬁguration settings are activated after restarting the network connection. When the conﬁguration settings are changed, you must restart the network connection. You can restart the network connection by clicking the [Network Restart] on the main menu (41).

23

Image 23

Contents Trademark acknowledgment FeaturesThank you for purchasing this product My Image Function Messeger Function ContentsConnection to the network Network Presentation Web ControlOther Functions Network Bridge FunctionDo not USE Near the Following Security precautions when using wireless LANSystem requirements Connection to the networkSystem requirements Quick connectionEquipments connection Manual network connection setting Wired LANThis section explains how to set it up manually Network settingsManual network connection setting Wired LAN Setting automatically About IP address Setting manuallyInternet Option setting Preparation for wireless LAN connection Manual network connection setting Wireless LANChannel Encryption rating None IP address Manual network connection setting Wireless LANWireless LAN connection set up WirelessAbout IP address Manual network connection setting Wireless LAN Network Presentation Web Control 17 or 3.2 Crestron e-Control Web ControlLogon User name Password Administrator BlankProjector Web Control Dhcp Projector Web ControlNetwork Information LANAMX D.D Displays and conﬁgures network settingsDhcp OFF Projector Web Control Network SettingsDhcp on Crestron e-Control Wired SetupOther Setup Displays and conﬁgures communication port settings Port SettingsClick the Apply button to save the settings Projector Web Control Port SettingsSend Test Mail Mail SettingsDisplays and conﬁgures e-mail addressing settings Displays and conﬁgures failure & alert settings Alert SettingsAlert Items are shown below Projector Web Control Alert SettingsDisplays and conﬁgures schedule settings Schedule SettingsSchedule settings are shown below Projector Web Control Schedule SettingsProjector Web Control Schedule Settings Displays and conﬁgures the date and time settings Date/Time SettingsSntp Server Address Projector Web Control Date/Time SettingsTime difference SntpSnmp Security SettingsProjector Control Projector Web Control Projector Control Standby Mode Setup Auto KeystoneAuto ECO Mode ECO ModeAudio Source Audio VolumeMIC Volume SpeakerMY BUTTON-1 Direct Power onAuto Power OFF Option Auto SearchService Remote Control Projector Status Displays the settings and status of the projectorDescription Restart Network RestartRestarts the projector’s network connection Tools Crestron e-ControlOnly English is supported on Crestron e-Control Tab Description Log OutSelects input from LAN port Crestron e-ControlMain window Sources ListCrestron e-Control- Main window Projector Tools windowCrestron Control Crestron e-Control- Tools window Projector Conﬁgures the network settings of the projectorUser Password Admin PasswordProjector Information Info windowHelp Desk window Emergency Alert My Image Function Messenger Function LAN port USB Type a port Control port Connecting devicesNetwork Bridge Function Condition Communication setupCommunication port Transmission method Option menu Service Communication in the Operating GuideFULL-DUPLEX Transmission methodMail Alerts Other FunctionsMail Alerts Snmp Settings Projector Management using SnmpEvent Scheduling Event Scheduling Date/Time Settings Communication Port Command Control via the NetworkFollowing two ports are assigned for the command control Command Control via the Network TCP #9715 Command FormatReply Error code Header Data length RS-232Ccommand Check Sum ConnectionReply Data format Automatic Connection Break AuthenticationCrestron RoomView Problem Likely Cause Things to Check TroubleshootingSpeciﬁcations Warranty and after-sales service