Crestron electronic CP-X3014WN, CP-X4014WN Communication setup, Communication port, Condition

Page 53

6. Network Bridge Function

6.2 Communication setup

To conﬁgure the setup of the communication using NETWORK BRIDGE for the projector, use items in the COMMUNICATION menu. Open the menu of the projector and select the OPTION - SERVICE - COMMUNICATION menu. (OPTION menu > SERVICE > COMMUNICATION in the Operating Guide)

1)In the COMMUNICATION TYPE menu, select NETWORK BRIDGE (WIRELESS or WIRED depending on the type of connection you use) for the CONTROL port.

2)Using the SERIAL SETTINGS menu, select the proper baud rate and parity for the CONTROL port, according to the speciﬁcation of the RS-232C port of the connected device.

Item	Condition

BAUD RATE	4800bps/9600bps/19200bps/38400bps

PARITY	NONE/ODD/EVEN

Data length	8 bit (ﬁxed)

Start bit	1 bit (ﬁxed)

Stop bit	1 bit (ﬁxed)

3)Using the TRANSMISSION METHOD menu, set up the proper method for the CONTROL port according to your use.

NOTE • The OFF is selected for the COMMUNICATION TYPE as the default setting.

•Using the COMMUNICATION menu, set up the communication. Remember that an unsuitable setup could cause malfunction of communication.

•When either one of the NETWORK BRIDGE settings is selected in the COMMUNICATION TYPE menu, RS-232C commands cannot be received from the CONTROL port.

6.3 Communication port

For the NETWORK BRIDGE function, send the data from the computer to the projector with using the Network Bridge Port that is conﬁgured in the Port Settings of web browser. (23)

NOTE • Except for 41794, 9715, 9716, 9719, 9720, 5900, 5500, 4352 between 1024 and 65535 can be set up as the Network Bridge Port number. It is set to 9717 as the default setting.

53

Image 53

Contents Trademark acknowledgment FeaturesThank you for purchasing this product Connection to the network ContentsNetwork Presentation Web Control My Image Function Messeger FunctionOther Functions Network Bridge FunctionDo not USE Near the Following Security precautions when using wireless LANSystem requirements Connection to the networkSystem requirements Quick connectionThis section explains how to set it up manually Manual network connection setting Wired LANNetwork settings Equipments connectionManual network connection setting Wired LAN Setting automatically About IP address Setting manuallyInternet Option setting Preparation for wireless LAN connection Manual network connection setting Wireless LANWireless LAN connection set up Manual network connection setting Wireless LANWireless Channel Encryption rating None IP addressAbout IP address Manual network connection setting Wireless LAN Network Presentation Web Control 17 or 3.2 Crestron e-Control Web ControlLogon User name Password Administrator BlankProjector Web Control Network Information Projector Web ControlLAN DhcpAMX D.D Displays and conﬁgures network settingsDhcp OFF Projector Web Control Network SettingsDhcp on Crestron e-Control Wired SetupOther Setup Displays and conﬁgures communication port settings Port SettingsClick the Apply button to save the settings Projector Web Control Port SettingsSend Test Mail Mail SettingsDisplays and conﬁgures e-mail addressing settings Displays and conﬁgures failure & alert settings Alert SettingsAlert Items are shown below Projector Web Control Alert SettingsDisplays and conﬁgures schedule settings Schedule SettingsSchedule settings are shown below Projector Web Control Schedule SettingsProjector Web Control Schedule Settings Displays and conﬁgures the date and time settings Date/Time SettingsTime difference Projector Web Control Date/Time SettingsSntp Sntp Server AddressSnmp Security SettingsProjector Control Projector Web Control Projector Control Auto ECO Mode Setup Auto KeystoneECO Mode Standby ModeMIC Volume Audio VolumeSpeaker Audio SourceAuto Power OFF Direct Power onOption Auto Search MY BUTTON-1Service Remote Control Projector Status Displays the settings and status of the projectorDescription Restart Network RestartRestarts the projector’s network connection Only English is supported on Crestron e-Control Crestron e-ControlTab Description Log Out ToolsMain window Crestron e-ControlSources List Selects input from LAN portCrestron e-Control- Main window Projector Tools windowCrestron Control User Password Projector Conﬁgures the network settings of the projectorAdmin Password Crestron e-Control- Tools windowProjector Information Info windowHelp Desk window Emergency Alert My Image Function Messenger Function LAN port USB Type a port Control port Connecting devicesNetwork Bridge Function Condition Communication setupCommunication port Transmission method Option menu Service Communication in the Operating GuideFULL-DUPLEX Transmission methodMail Alerts Other FunctionsMail Alerts Snmp Settings Projector Management using SnmpEvent Scheduling Event Scheduling Date/Time Settings Communication Port Command Control via the NetworkFollowing two ports are assigned for the command control Command Control via the Network Reply Error code Command FormatHeader Data length RS-232Ccommand Check Sum Connection TCP #9715Reply Data format Automatic Connection Break AuthenticationCrestron RoomView Problem Likely Cause Things to Check TroubleshootingSpeciﬁcations Warranty and after-sales service