Crestron electronic CP-WX3014WN Projector Web Control Date/Time Settings, Time difference, Sntp

Page 31

3. Web Control

3.1 Projector Web Control - Date/Time Settings (continued)

		Item	Description

	Time difference		Conﬁgures the time difference. Set the same time difference
	Time difference		as the one set on your computer. If unsure, consult your IT
			manager.
	SNTP		Click the [ON] check box to retrieve Date and Time
	SNTP		information from the SNTP server and set the following items.

			Conﬁgures the SNTP server address in IP format.
			• The address allows not only IP address but also domain
		SNTP Server Address	name if the valid DNS server is setup in the Network
			Settings. The maximum length of host or domain name is up
			to 255 characters.
		Cycle	Conﬁgures the interval at which to retrieve Date and Time
		Cycle	information from the SNTP server (hour:minute).
			information from the SNTP server (hour:minute).

Click the [Apply] button to save the settings.

NOTE • The new conﬁguration settings are activated after restarting the network connection. When the conﬁguration settings are changed, you must restart the network connection. You can restart the network connection by clicking the [Network Restart] on the main menu (41).

•If you connect the projector to an existing network, consult a network administrator before setting server addresses.

•Once you turn off the projector in the SAVING mode (SETUP menu in the Operating Guide) or the AC power, the current date and time setting is reset.

•To enable the SNTP function, the time difference must be set.

•The projector will retrieve Date and Time information from the time server and override time settings when SNTP is enabled.

•The internal clock’s time may not remain accurate. Using SNTP is recommended to maintain accurate time.

31

Image 31

Contents Thank you for purchasing this product FeaturesTrademark acknowledgment My Image Function Messeger Function ContentsConnection to the network Network Presentation Web ControlOther Functions Network Bridge FunctionDo not USE Near the Following Security precautions when using wireless LANSystem requirements Connection to the networkSystem requirements Quick connectionEquipments connection Manual network connection setting Wired LANThis section explains how to set it up manually Network settingsManual network connection setting Wired LAN Setting automatically About IP address Setting manuallyInternet Option setting Preparation for wireless LAN connection Manual network connection setting Wireless LANChannel Encryption rating None IP address Manual network connection setting Wireless LANWireless LAN connection set up WirelessAbout IP address Manual network connection setting Wireless LAN Network Presentation Web Control 17 or 3.2 Crestron e-Control Web ControlProjector Web Control User name Password Administrator BlankLogon Dhcp Projector Web ControlNetwork Information LANAMX D.D Displays and conﬁgures network settingsDhcp on Projector Web Control Network SettingsDhcp OFF Other Setup Wired SetupCrestron e-Control Displays and conﬁgures communication port settings Port SettingsClick the Apply button to save the settings Projector Web Control Port SettingsDisplays and conﬁgures e-mail addressing settings Mail SettingsSend Test Mail Displays and conﬁgures failure & alert settings Alert SettingsAlert Items are shown below Projector Web Control Alert SettingsDisplays and conﬁgures schedule settings Schedule SettingsSchedule settings are shown below Projector Web Control Schedule SettingsProjector Web Control Schedule Settings Displays and conﬁgures the date and time settings Date/Time SettingsSntp Server Address Projector Web Control Date/Time SettingsTime difference SntpSnmp Security SettingsProjector Control Projector Web Control Projector Control Standby Mode Setup Auto KeystoneAuto ECO Mode ECO ModeAudio Source Audio VolumeMIC Volume SpeakerMY BUTTON-1 Direct Power onAuto Power OFF Option Auto SearchService Remote Control Projector Status Displays the settings and status of the projectorRestarts the projector’s network connection Network RestartDescription Restart Tools Crestron e-ControlOnly English is supported on Crestron e-Control Tab Description Log OutSelects input from LAN port Crestron e-ControlMain window Sources ListCrestron e-Control- Main window Crestron Control Tools windowProjector Crestron e-Control- Tools window Projector Conﬁgures the network settings of the projectorUser Password Admin PasswordProjector Information Info windowHelp Desk window Emergency Alert My Image Function Messenger Function Network Bridge Function Connecting devicesLAN port USB Type a port Control port Communication port Communication setupCondition Transmission method Option menu Service Communication in the Operating GuideFULL-DUPLEX Transmission methodMail Alerts Other FunctionsMail Alerts Snmp Settings Projector Management using SnmpEvent Scheduling Event Scheduling Date/Time Settings Following two ports are assigned for the command control Command Control via the NetworkCommunication Port Command Control via the Network TCP #9715 Command FormatReply Error code Header Data length RS-232Ccommand Check Sum ConnectionReply Data format Automatic Connection Break AuthenticationCrestron RoomView Problem Likely Cause Things to Check TroubleshootingSpeciﬁcations Warranty and after-sales service