Crestron electronic CP-X3014WN, CP-X4014WN user manual Wired Setup, Other Setup, Crestron e-Control

Page 21

3. Web Control

3.1 Projector Web Control - Network Settings (continued)

			Item	Description

Wired Setup				Conﬁgures the wired LAN settings.
	IP Conﬁguration			Conﬁgures network settings.
		DHCP ON		Enables DHCP.
		DHCP OFF		Disables DHCP.
			IP Address	Conﬁgures the IP address when DHCP is disabled.
			Subnet Mask	Conﬁgures the subnet mask when DHCP is disabled.
			Default	Conﬁgures the default gateway when DHCP is disabled.
			Gateway	Conﬁgures the default gateway when DHCP is disabled.
			Gateway
	DNS Server Address			Conﬁgures the DNS server address.
Other Setup				Conﬁgures other network settings.
				Set whether to or not to use Crestron e-Control®.
	Crestron e-Control			If you choose Disable, the Logon window of the Projector
	Crestron e-Control			Web Control and not the selection window will be displayed
				Web Control and not the selection window will be displayed
				at ﬁrst of the Web Control.

Click the [Apply] button to save the settings.

NOTE • The new conﬁguration settings are activated after restarting the network connection. When the conﬁguration settings are changed, you must restart the network connection. You can restart the network connection by clicking [Network Restart] on the main menu (41).

•If you connect the projector to an existing network, consult a network administrator before setting server addresses.

•The WEP Key, WPA passphrase and SSID settings will not be set if the invalid characters are used.

•The projector does not allow both wireless and wired LAN to be connected to the same network. Do not set the same network address for both wireless and wired LAN.

21

Image 21

Contents Features Thank you for purchasing this productTrademark acknowledgment Connection to the network ContentsNetwork Presentation Web Control My Image Function Messeger FunctionOther Functions Network Bridge FunctionDo not USE Near the Following Security precautions when using wireless LANSystem requirements Connection to the networkSystem requirements Quick connectionThis section explains how to set it up manually Manual network connection setting Wired LANNetwork settings Equipments connectionManual network connection setting Wired LAN Setting automatically About IP address Setting manuallyInternet Option setting Preparation for wireless LAN connection Manual network connection setting Wireless LANWireless LAN connection set up Manual network connection setting Wireless LANWireless Channel Encryption rating None IP addressAbout IP address Manual network connection setting Wireless LAN Network Presentation Web Control 17 or 3.2 Crestron e-Control Web ControlUser name Password Administrator Blank Projector Web ControlLogon Network Information Projector Web ControlLAN DhcpAMX D.D Displays and conﬁgures network settingsProjector Web Control Network Settings Dhcp onDhcp OFF Wired Setup Other SetupCrestron e-Control Displays and conﬁgures communication port settings Port SettingsClick the Apply button to save the settings Projector Web Control Port SettingsMail Settings Displays and conﬁgures e-mail addressing settingsSend Test Mail Displays and conﬁgures failure & alert settings Alert SettingsAlert Items are shown below Projector Web Control Alert SettingsDisplays and conﬁgures schedule settings Schedule SettingsSchedule settings are shown below Projector Web Control Schedule SettingsProjector Web Control Schedule Settings Displays and conﬁgures the date and time settings Date/Time SettingsTime difference Projector Web Control Date/Time SettingsSntp Sntp Server AddressSnmp Security SettingsProjector Control Projector Web Control Projector Control Auto ECO Mode Setup Auto KeystoneECO Mode Standby ModeMIC Volume Audio VolumeSpeaker Audio SourceAuto Power OFF Direct Power onOption Auto Search MY BUTTON-1Service Remote Control Projector Status Displays the settings and status of the projectorNetwork Restart Restarts the projector’s network connectionDescription Restart Only English is supported on Crestron e-Control Crestron e-ControlTab Description Log Out ToolsMain window Crestron e-ControlSources List Selects input from LAN portCrestron e-Control- Main window Tools window Crestron ControlProjector User Password Projector Conﬁgures the network settings of the projectorAdmin Password Crestron e-Control- Tools windowProjector Information Info windowHelp Desk window Emergency Alert My Image Function Messenger Function Connecting devices Network Bridge FunctionLAN port USB Type a port Control port Communication setup Communication portCondition Transmission method Option menu Service Communication in the Operating GuideFULL-DUPLEX Transmission methodMail Alerts Other FunctionsMail Alerts Snmp Settings Projector Management using SnmpEvent Scheduling Event Scheduling Date/Time Settings Command Control via the Network Following two ports are assigned for the command controlCommunication Port Command Control via the Network Reply Error code Command FormatHeader Data length RS-232Ccommand Check Sum Connection TCP #9715Reply Data format Automatic Connection Break AuthenticationCrestron RoomView Problem Likely Cause Things to Check TroubleshootingSpeciﬁcations Warranty and after-sales service