Crestron electronic CP-X4014WN, CP-X3014WN, CP-X2514WN, CP-WX3014WN Other Functions, Mail Alerts

Page 56

7. Other Functions

7.Other Functions

7.1E-mail Alerts

The projector can automatically send an alert message to the speciﬁed e-mail addresses when the projector detects a certain condition that is requiring maintenance or detected an error.

NOTE • Up to ﬁve e-mail addresses can be speciﬁed.

•The projector may be not able to send e-mail if the projector suddenly loses power.

Mail Settings (24)

To use the projector’s e-mail alert function, please conﬁgure the following items through a web browser.

Example: If the IP address of the projector is set to 192.168.1.10:

1)Enter “http://192.168.1.10/” into the address bar of the web browser, and select Projector Web Control from the selection window.

2)Enter your user name and password, and then click the [OK].

3)Click the [Mail Settings] and conﬁgure each item. Refer to item 3.1.5 Mail Settings (24) for further information.

4)Click the [Apply] button to save the settings.

NOTE • Click the [Send Test Mail] button in the [Mail Settings] to conﬁrm that the e-mail settings are correct. The following mail will be delivered to the speciﬁed addresses.

Subject line	:Test Mail	<Projector name>
Text	:Send Test Mail
	Date	<Testing date>
	Time	<Testing time>
	IP Address	<Projector IP address>
	MAC Address	<Projector MAC address>

56

Image 56

Contents Trademark acknowledgment FeaturesThank you for purchasing this product Contents Connection to the networkNetwork Presentation Web Control My Image Function Messeger FunctionNetwork Bridge Function Other FunctionsSecurity precautions when using wireless LAN Do not USE Near the FollowingConnection to the network System requirementsQuick connection System requirementsManual network connection setting Wired LAN This section explains how to set it up manuallyNetwork settings Equipments connectionManual network connection setting Wired LAN About IP address Setting manually Setting automaticallyInternet Option setting Manual network connection setting Wireless LAN Preparation for wireless LAN connectionManual network connection setting Wireless LAN Wireless LAN connection set upWireless Channel Encryption rating None IP addressAbout IP address Manual network connection setting Wireless LAN Network Presentation Web Control Web Control 17 or 3.2 Crestron e-ControlLogon User name Password Administrator BlankProjector Web Control Projector Web Control Network InformationLAN DhcpDisplays and conﬁgures network settings AMX D.DDhcp OFF Projector Web Control Network SettingsDhcp on Crestron e-Control Wired SetupOther Setup Port Settings Displays and conﬁgures communication port settingsProjector Web Control Port Settings Click the Apply button to save the settingsSend Test Mail Mail SettingsDisplays and conﬁgures e-mail addressing settings Alert Settings Displays and conﬁgures failure & alert settingsProjector Web Control Alert Settings Alert Items are shown belowSchedule Settings Displays and conﬁgures schedule settingsProjector Web Control Schedule Settings Schedule settings are shown belowProjector Web Control Schedule Settings Date/Time Settings Displays and conﬁgures the date and time settingsProjector Web Control Date/Time Settings Time differenceSntp Sntp Server AddressSecurity Settings SnmpProjector Control Projector Web Control Projector Control Setup Auto Keystone Auto ECO ModeECO Mode Standby ModeAudio Volume MIC VolumeSpeaker Audio SourceDirect Power on Auto Power OFFOption Auto Search MY BUTTON-1Service Remote Control Displays the settings and status of the projector Projector StatusDescription Restart Network RestartRestarts the projector’s network connection Crestron e-Control Only English is supported on Crestron e-ControlTab Description Log Out ToolsCrestron e-Control Main windowSources List Selects input from LAN portCrestron e-Control- Main window Projector Tools windowCrestron Control Projector Conﬁgures the network settings of the projector User PasswordAdmin Password Crestron e-Control- Tools windowInfo window Projector InformationHelp Desk window Emergency Alert My Image Function Messenger Function LAN port USB Type a port Control port Connecting devicesNetwork Bridge Function Condition Communication setupCommunication port Option menu Service Communication in the Operating Guide Transmission methodTransmission method FULL-DUPLEXOther Functions Mail AlertsMail Alerts Projector Management using Snmp Snmp SettingsEvent Scheduling Event Scheduling Date/Time Settings Communication Port Command Control via the NetworkFollowing two ports are assigned for the command control Command Control via the Network Command Format Reply Error codeHeader Data length RS-232Ccommand Check Sum Connection TCP #9715Reply Data format Authentication Automatic Connection BreakCrestron RoomView Troubleshooting Problem Likely Cause Things to CheckSpeciﬁcations Warranty and after-sales service