Canon LV-X2 Adjusting the Screen, Zoom Adjustment, Focus Adjustment, Keystone Adjustment

Page 20

BASIC OPERATION

ADJUSTING THE SCREEN

ZOOM ADJUSTMENT

Move ZOOM LEVER upward to make the image larger. Move ZOOM	ZOOM LEVER
LEVER downward to make the image smaller.
	WIDE

TELE

FOCUS ADJUSTMENT

Rotate the FOCUS RING to adjust the projected picture focus.

FOCUS RING

KEYSTONE ADJUSTMENT

If a projected picture has keystone distortion, correct image with KEYSTONE adjustment.

1	Press KEYSTONE ▲/▼ button on Remote Control Unit or
1	KEYSTONE button on Top Control or select Keystone on
	SETTING menu. (Refer to page 35.) Keystone dialog box
	appears.
2	Correct keystone distortion by pressing KEYSTONE ▲/▼ button
2	or POINT UP/DOWN button(s). Press KEYSTONE ▲ button or

POINT UP button to reduce the upper part of image, and press KEYSTONE ▼ button or POINT DOWN button to reduce the lower part.

•Arrows are white in no correction.

•Arrow of direction being corrected turns blue.

•Arrow disappears at the maximum correction.

Reduce the upper width with KEYSTONE ▲ button or POINT UP button.

Reduce the lower width with KEYSTONE ▼ button or POINT DOWN button.

PICTURE FREEZE FUNCTION

Press the FREEZE button on the Remote Control Unit to freeze the picture on-screen. To cancel the FREEZE function, press the FREEZE button again or press any other button.

20

Image 20

Contents LV-X2 To the Owner Safety Instructions Voor de klanten in NederlandCompliances Federal Communication Commission NoticeTable of Contents Features and Design Wide Zoom LensHOT AIR Exhausted PreparationNomenchtor For Continental Europe SETTING-UP the ProjectorConnecting AC Power Cord Room Light Adjustable FeetPreparation Positioning the Projector Preparation Mounting the Lens Cover Moving the ProjectorConnecting the Projector Terminals of the ProjectorVideo AV AudioConnecting to a Computer Terminals ProjectorConnecting Video Equipment Audio OUTOperation of the Remote Control Unit Before OperationBefore Operation Operating Range Remote Control Unit Battery InstallationBattery TOP Controls and Indicators Ready IndicatorFlow of ON-SCREEN Menu Operation HOW to Operate the ON-SCREEN MenuOperating the ON-SCREEN Menu Before Operation Menu BAR Guide WindowBasic Operation Turning on / OFF the ProjectorTurning on the Projector Turning OFF the ProjectorAdjusting the Screen Zoom AdjustmentFocus Adjustment Keystone AdjustmentSound Adjustment Timer FunctionBasic Operation No Show Function Direct OperationComputer Input Selecting the Input SourceSelecting the Computer System AutoComputer Input Compatible Computer Specifications ResolutionFreq KHzPC Adjustment Auto PC AdjustmentPC Adjust Menu Auto PC AdjComputer Input Manual PC Adjustment Full screen Display areaDisplay area H Picture Image Adjustment Image Level Select DirectImage Level Select Menu Image Select MenuComputer Input Image Level Adjustment Image Adjust MenuPicture Screen Adjustment Screen MenuVideo Input VideoSelecting the Video System AutoAV System Menu Video or S-VIDEO AV System Menu Component VideoCinema Video Input Image Level Adjustment Reset all adjustment to the previous figure Setting Menu SettingSetting Menu To change the code of the Remote Control Unit Power managementRemote control Lamp counter resetLamp Replace Lamp ReplacementAppendix Lamp Handling Precautions Appendix Lamp Replace CounterMaintenance AIR Filter Care and CleaningCleaning Projection Lens RecommendationTroubleshooting Remote Control Unit Does not workTechnical Specifications Optional PartsAppendix Configurations of the Terminals Control Port ConnectorUSB Connector Series B Computer Input Terminal AnalogCanon U.S.A., INC