Canon LV-X2 owner manual Selecting the Video System, Auto, AV System Menu Video or S-VIDEO

Page 31

VIDEO INPUT

SELECTING THE VIDEO SYSTEM

1

Press the MENU button and the ON-SCREEN MENU will

appear. Press the POINT LEFT/RIGHT buttons to move the red

 

frame to AV SYSTEM Menu icon.

2

Press the POINT DOWN button to move the red arrow to the

system that you want to select and then press the SET button.

VIDEO JACK OR S-VIDEO JACK

Auto

Projector automatically detects the incoming Video system, and adjusts itself to optimize its performance.

When Video System is PAL-M or PAL-N, select system manually.

PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N

If projector cannot reproduce a proper video image, it is necessary to select a specific broadcast signal format among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.

AV SYSTEM MENU (VIDEO OR S-VIDEO)

AV SYSTEM Menu icon

This box indicates the system being selected.

Move the red arrow to the system and press the SET button.

Y, Pb/Cb, Pr/Cr JACKS

Auto

The projector automatically detects the incoming Video signal, and then adjusts itself to optimize its performance.

COMPONENT VIDEO SIGNAL FORMAT

If the projector cannot reproduce a proper video image, it is necessary to select a specific component video signal format among 480i, 575i, 480p, 575p, 720p, 1035i and 1080i.

AV SYSTEM MENU (COMPONENT VIDEO)

AV SYSTEM Menu icon

This box indicates the system being selected.

Move the red arrow to the system and press the SET button.

31

Image 31
Contents LV-X2 To the Owner Voor de klanten in Nederland Safety InstructionsFederal Communication Commission Notice CompliancesTable of Contents Wide Zoom Lens Features and DesignNomenchtor PreparationHOT AIR Exhausted Connecting AC Power Cord SETTING-UP the ProjectorFor Continental Europe Preparation Positioning the Projector Adjustable FeetRoom Light Moving the Projector Preparation Mounting the Lens CoverAV Audio Connecting the ProjectorTerminals of the Projector VideoTerminals Projector Connecting to a ComputerAudio OUT Connecting Video EquipmentBefore Operation Operation of the Remote Control UnitBattery Remote Control Unit Battery InstallationBefore Operation Operating Range Ready Indicator TOP Controls and IndicatorsOperating the ON-SCREEN Menu HOW to Operate the ON-SCREEN MenuFlow of ON-SCREEN Menu Operation Guide Window Before Operation Menu BARTurning OFF the Projector Basic OperationTurning on / OFF the Projector Turning on the ProjectorKeystone Adjustment Adjusting the ScreenZoom Adjustment Focus AdjustmentDirect Operation Sound AdjustmentTimer Function Basic Operation No Show FunctionAuto Computer InputSelecting the Input Source Selecting the Computer SystemKHz Computer Input Compatible Computer SpecificationsResolution FreqAuto PC Adj PC AdjustmentAuto PC Adjustment PC Adjust MenuComputer Input Manual PC Adjustment Display area H Display areaFull screen Image Select Menu Picture Image AdjustmentImage Level Select Direct Image Level Select MenuImage Adjust Menu Computer Input Image Level AdjustmentScreen Menu Picture Screen AdjustmentVideo Video InputAV System Menu Component Video Selecting the Video SystemAuto AV System Menu Video or S-VIDEOCinema Video Input Image Level Adjustment Reset all adjustment to the previous figure Setting Menu SettingSetting Menu Lamp counter reset To change the code of the Remote Control UnitPower management Remote controlAppendix Lamp ReplacementLamp Replace Appendix Lamp Replace Counter Lamp Handling PrecautionsRecommendation MaintenanceAIR Filter Care and Cleaning Cleaning Projection LensTroubleshooting Does not work Remote Control UnitOptional Parts Technical SpecificationsComputer Input Terminal Analog Appendix Configurations of the TerminalsControl Port Connector USB Connector Series BCanon U.S.A., INC