Canon LV-X2 owner manual Computer Input Manual PC Adjustment

Page 25

COMPUTER INPUT

MANUAL PC ADJUSTMENT

This projector can automatically tune to the display signals of most personal computers. However, some computers employ special signal formats which are different from the standard ones and may not be tuned by the Multi-Scan system of this projector. If this happens, projector cannot reproduce a proper image and the image may be displayed as a flickering picture, a non-synchronized picture, a non-centered picture or a skewed picture.

This projector has Manual PC Adjustment to enable you to precisely adjust several parameters to match those special signal formats. This projector has 5 independent memory areas to memorize those parameters manually adjusted. This enables you to recall the setting for a specific computer whenever you use it.

Note : This PC ADJUST Menu cannot be operated when "RGB" is selected on PC SYSTEM Menu (P22).

1

Press the MENU button and the ON-SCREEN MENU will

appear. Press the POINT LEFT/RIGHT button to move the red

 

frame to PC ADJUST Menu icon.

2

Press the POINT DOWN button to move the red frame to the

item that you want to adjust and then press the SET button. The

Adjustment dialog box will appear. Press the POINT LEFT/RIGHT button to adjust value.

Fine sync

Adjusts an image as necessary to eliminate flicker from the display. Press the POINT LEFT/RIGHT button to adjust value.(From 0 to 31.)

Total dots

The number of total horizontal dots in your picture. Press the POINT LEFT/RIGHT button(s) and adjust number to match your PC image.

Horizontal

Adjusts the horizontal picture position. Press the POINT LEFT/RIGHT button(s) to adjust the position.

Vertical

Adjusts the vertical picture position. Press the POINT LEFT/RIGHT button(s) to adjust the position.

PC ADJUST MENU

PC ADJUST Menu icon

Move the red frame to the item and press the SET button.

Shows status

(Stored / Free) of the

Selected Mode selected Mode.

Press the POINT LEFT/RIGHT button to adjust the value.

Press the SET button at this icon to adjust “Clamp,” “Display area (H/V)” or set “Full screen.”

Current mode

Press the SET button to show the information of the computer selected.

Clamp

Adjusts the clamp level. When the image has a dark bar(s), try this adjustment.

Current mode

Press the SET button at the Current mode icon to show the information of the computer connected.

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents LV-X2 To the Owner Voor de klanten in Nederland Safety InstructionsFederal Communication Commission Notice CompliancesTable of Contents Wide Zoom Lens Features and DesignNomenchtor PreparationHOT AIR Exhausted Connecting AC Power Cord SETTING-UP the ProjectorFor Continental Europe Preparation Positioning the Projector Adjustable FeetRoom Light Moving the Projector Preparation Mounting the Lens CoverTerminals of the Projector Connecting the ProjectorVideo AV AudioTerminals Projector Connecting to a ComputerAudio OUT Connecting Video EquipmentBefore Operation Operation of the Remote Control UnitBattery Remote Control Unit Battery InstallationBefore Operation Operating Range Ready Indicator TOP Controls and IndicatorsOperating the ON-SCREEN Menu HOW to Operate the ON-SCREEN MenuFlow of ON-SCREEN Menu Operation Guide Window Before Operation Menu BARTurning on / OFF the Projector Basic OperationTurning on the Projector Turning OFF the ProjectorZoom Adjustment Adjusting the ScreenFocus Adjustment Keystone AdjustmentTimer Function Sound AdjustmentBasic Operation No Show Function Direct OperationSelecting the Input Source Computer InputSelecting the Computer System AutoResolution Computer Input Compatible Computer SpecificationsFreq KHzAuto PC Adjustment PC AdjustmentPC Adjust Menu Auto PC AdjComputer Input Manual PC Adjustment Display area H Display areaFull screen Image Level Select Direct Picture Image AdjustmentImage Level Select Menu Image Select MenuImage Adjust Menu Computer Input Image Level AdjustmentScreen Menu Picture Screen AdjustmentVideo Video InputAuto Selecting the Video SystemAV System Menu Video or S-VIDEO AV System Menu Component VideoCinema Video Input Image Level Adjustment Reset all adjustment to the previous figure Setting Menu SettingSetting Menu Power management To change the code of the Remote Control UnitRemote control Lamp counter resetAppendix Lamp ReplacementLamp Replace Appendix Lamp Replace Counter Lamp Handling PrecautionsAIR Filter Care and Cleaning MaintenanceCleaning Projection Lens RecommendationTroubleshooting Does not work Remote Control UnitOptional Parts Technical SpecificationsControl Port Connector Appendix Configurations of the TerminalsUSB Connector Series B Computer Input Terminal AnalogCanon U.S.A., INC
Top Page Image Contents