Canon LV-X2 owner manual Reset all adjustment to the previous figure

Page 34

VIDEO INPUT

3 Store

To store a manually preset image level, move the red frame to the Store icon and press the SET button. The message “OK?” will appear. Select [Yes] to store the manual adjustment.

To set this manual adjustment, select Custom by pressing the IMAGE button or through the IMAGE SELECT MENU (refer to P32).

Other icons operate as follows.

Reset

Reset all adjustment to the previous figure.

Quit

Store icon

Closes the IMAGE MENU.

“OK?” message

Move the red arrow pointer to [Yes] and then press the SET button.

PICTURE SCREEN ADJUSTMENT

This projector has a picture screen resize function, which enables you to display the desirable image size.

1

Press the MENU button and the ON-SCREEN MENU will

 

appear. Press the POINT LEFT/RIGHT button(s) to move the

 

red frame to the SCREEN Menu icon.

2

Press the POINT DOWN button and move the red frame to the

function that you want to select and then press the SET button.

Normal

Provides image at a normal video aspect ratio of 4 : 3.

Wide

Provides image at a wide screen ratio of 16 : 9.

SCREEN MENU

SCREEN Menu icon

Move the red frame to the function and press the SET button.

NOTE : The SCREEN Menu cannot be operated when “720p,” “1035i,” or “1080i” is selected on the AV SYSTEM Menu (P31).

34

Image 34
Contents LV-X2 To the Owner Safety Instructions Voor de klanten in NederlandCompliances Federal Communication Commission NoticeTable of Contents Features and Design Wide Zoom LensNomenchtor PreparationHOT AIR Exhausted Connecting AC Power Cord SETTING-UP the ProjectorFor Continental Europe Preparation Positioning the Projector Adjustable FeetRoom Light Preparation Mounting the Lens Cover Moving the ProjectorVideo Connecting the ProjectorTerminals of the Projector AV AudioConnecting to a Computer Terminals ProjectorConnecting Video Equipment Audio OUTOperation of the Remote Control Unit Before OperationBattery Remote Control Unit Battery InstallationBefore Operation Operating Range TOP Controls and Indicators Ready IndicatorOperating the ON-SCREEN Menu HOW to Operate the ON-SCREEN MenuFlow of ON-SCREEN Menu Operation Before Operation Menu BAR Guide WindowTurning on the Projector Basic OperationTurning on / OFF the Projector Turning OFF the ProjectorFocus Adjustment Adjusting the ScreenZoom Adjustment Keystone AdjustmentBasic Operation No Show Function Sound AdjustmentTimer Function Direct OperationSelecting the Computer System Computer InputSelecting the Input Source AutoFreq Computer Input Compatible Computer SpecificationsResolution KHzPC Adjust Menu PC AdjustmentAuto PC Adjustment Auto PC AdjComputer Input Manual PC Adjustment Display area H Display areaFull screen Image Level Select Menu Picture Image AdjustmentImage Level Select Direct Image Select MenuComputer Input Image Level Adjustment Image Adjust MenuPicture Screen Adjustment Screen MenuVideo Input VideoAV System Menu Video or S-VIDEO Selecting the Video SystemAuto AV System Menu Component VideoCinema Video Input Image Level Adjustment Reset all adjustment to the previous figure Setting Menu SettingSetting Menu Remote control To change the code of the Remote Control UnitPower management Lamp counter resetAppendix Lamp ReplacementLamp Replace Lamp Handling Precautions Appendix Lamp Replace CounterCleaning Projection Lens MaintenanceAIR Filter Care and Cleaning RecommendationTroubleshooting Remote Control Unit Does not workTechnical Specifications Optional PartsUSB Connector Series B Appendix Configurations of the TerminalsControl Port Connector Computer Input Terminal AnalogCanon U.S.A., INC