Compaq Memory Channel Hub manual General, Site Preparation

2 Installation

2.1 General

This chapter covers the installation of the 2T-CCMHA-CB central office Memory Channel hub in a 48.26-cm (19-in.) NEBS 2000/ETSI-compliant cabinet with an EIA rail-hole pattern. The major topics covered in this chapter include:

∙Site Preparation

∙Unpacking the Shipment

∙Installing the 2T-CCMHA-CB central office Memory Channel Hub

–Determining the Installation Area

–Attaching the Slide Assemblies to the Cabinet Rails

–Attaching the Inner Races to the Tray

–Mounting the Chassis and Front Bezel to the Tray

∙Installing the Interlock System

For information on configuration and verification, refer to the Memory Channel User’s Guide.

2.2 Site Preparation

The installation instructions that follow assume that:

∙All cables that you plan to connect to the 2T-CCMHA-CB central office Memory Channel hub are in place and clearly labeled. These cables are the BC12N cables from the CCMAA adapters installed in the AlphaServer systems.

∙The specifications and conditions listed in Section 1.3 have been met.

DIGITAL 2T-CCMHA-CB Central Office Memory Channel Hub Installation/Service Guide 2–1