Compaq Memory Channel Hub manual Attaching the Slide Assemblies to the Cabinet Rails

Installation

Figure 2-2 Attaching the Slide Assemblies to the Cabinet Rails

4

1

2

3

3

4

1

2

LJ-06501.AI7

2.4.2.2 Attaching the Left Slide Assembly to the Cabinet Rails

To attach the left slide assembly to the cabinet rails, refer to Figure 2-2 and proceed as follows:

1.Determine the proper mounting holes for the left slide brackets. The proper mounting holes are the 1st, 2nd, and 3rd holes of the installation area (see Figure 2-1).

2.Locate the left slide assembly.

3.Place the left front slide bracket on the inside of the left front rail and align the three slide bracket holes and with the 1st, 2nd, and 3rd holes of the installation area on the left front rail.

4.Install two 10-32 truss-head screws cin the 1st and 3rd holes of the installation area to secure the left front slide bracket to the left front rail, but do not tighten.

DIGITAL 2T-CCMHA-CB Central Office Memory Channel Hub Installation/Service Guide 2–7