Basic operations (continued)
Turning off the power
2
3
1 | VIDEO | RGB |
| LASER | |
| STANDBY/ON | POSITION |
1
RESET
MENU
FREEZE
MAGNIFY VOLUME
OFF
P in P | MUTE |
BLANK AUTO TIMER
1 | Press the STANDBY/ON button for approximately 1 second. |
• The Power indicator will blink orange, then the lamp will turn off. Approximately 1 second. after that, | |
| the indicator will light orange. |
| • After the power is turned off, the lamp will be cooled for approximately 1 min. and the power cannot |
| be turned off even by pressing the STANDBY/ON button. |
| • The standby status will not be entered if the time which the STANDBY/ON button is pressed is too |
| short. |
|
|
2 | Turn off the main power switch of the projector [ : OFF]. |
|
|
3 | Attach the lens cap. |
Caution The fan will continue running for approximately 1 min. after the STANDBY/ON button is pressed. Do not turn off the main power switch while the lamp is on because this will shorten the service life of the lamp.
Plug & Play
This projector is VESA DDC 1/2B compatible. Plug & play is possible by connecting to a computer that is VESA DDC (Display Data Channel) compatible.
(Plug & play is a system configured with peripheral equipment including a computer and display, and an operating system.
Caution • Use the RGB cable included with this projector when using plug & play. With other cables, pins (12) - (15) are sometimes not connected (effective only for RGB1).
•This device is recognized as a
•This function may not operate, depending on the personal computer used.
•When the DDC function does not operate on a personal computer running Windows95/98, select the display type from Screen Priority. It is recommended that Super VGA 800 x 600
The DDC function will not operate when connected to a Macintosh.
14