BOXLIGHT CP-33t manual Adjusting The Image, Zoom Adjustment, Focus Adjustment, Keystone Adjustment

Page 21

ADJUSTING THE IMAGE

BASIC OPERATION

ADJUSTING THE IMAGE

ZOOM ADJUSTMENT

1	Press the ZOOM button on the Top Control or the ZOOM ▲/▼
1	button on the Remote Control Unit to turn into the ZOOM
	mode.
2	Press the POINT UP button or the ZOOM ▲ button to have the
2	image larger, and press the POINT UP button or the ZOOM ▼

button to have the smaller.

In the Computer mode, the image can be expanded, compressed, and panned with the Digital Zoom function. Refer to page 29, 37 for the Digital Zoom operation.

Zoom

The message disappears after 4 seconds.

FOCUS ADJUSTMENT

1 Press the FOCUS button on the Top Control or the FOCUS

▲/▼ button on the Remote Control Unit to turn into the FOCUS mode.

2	Adjust the focus of the image by pressing the POINT
	UP/DOWN button or the FOCUS ▲/▼ button.

Focus

The message disappears after 4 seconds.

KEYSTONE ADJUSTMENT

If the picture has keystone distortion, correct image with KEYSTONE adjustment.

1	Press the KEYSTONE ▲/▼ button on the Remote Control Unit
1	or select the Keystone on the SCREEN menu. (Refer to page
	29, 30, 37.) The message “Keystone” is displayed.
2	Correct the Keystone distortion by pressing the KEYSTONE

▲ /▼ button or the POINT UP/DOWN button(s). Press the KEYSTONE ▲ button or the POINT UP button to reduce the upper part or the image, and press the KEYSTONE ▼ button or the POINT DOWN button to reduce the lower part.

Reduce the upper width with the KEY STONE ▲ button or the POINT UP button.

Keystone

The message disappears after 4 seconds.

Reduce the lower width with the KEY STONE ▼ button or the POINT DOWN button.

21

Image 21

Contents BOXLIGHT BOXLIGHT CP-33tUSER’S GUIDE TO THE OWNER SAFETY PRECAUTIONSINFORMATION TO THE USER RISK OF ELECTRIC SHOCK DO NOT OPENIMPORTANT SAFETY INSTRUCTIONS FEATURES AND DESIGN TABLE OF CONTENTSSETTING 5 COMPUTER MODEImage Resolution FEATURES AND DESIGNOther Features AccessoriesADJUSTABLE FEET AND FEET LOCK LATCHES POWER CORD CONNECTORPREPARATION NAME OF EACH PART OF THE PROJECTORADJUSTABLE FEET SETTING-UP THE PROJECTORPOSITIONING THE PROJECTOR ROOM LIGHTVENTILATION PREPARATION CONNECTING THE AC POWER CORDPREPARATION MOVING THE PROJECTOR CAUTION WHEN CARRYING OR TRANSPORTING THE PROJECTORCONTROL PORT CONNECTOR CONNECTING THE PROJECTORTERMINALS OF THE PROJECTOR S-VIDEO INPUT JACK VIDEO INPUT JACKCONNECTING TO THE VIDEO EQUIPMENT CONNECTING THE PROJECTORTerminals of the Projector To connect to the computer, refer to the figure below CONNECTING TO THE COMPUTERTerminal Terminal TerminalMAC ADAPTER Not supplied ing on the RESOLUTIONin the table below depend MODE that you want toBEFORE OPERATION OPERATION OF THE REMOTE CONTROLLeft Side LASER POINTER FUNCTIONOperating Range REMOTE CONTROL BATTERIES INSTALLATION16.4’ 5 m 16.4’ 5 m VOLUME BUTTONPOWER ON-OFF BUTTON TOP CONTROLS AND INDICATORSLAMP INDICATOR READY INDICATOROPERATING ON-SCREEN MENU HOW TO OPERATE ON-SCREEN MENUFLOW OF ON-SCREEN MENU WIRELESS REMOTE CONTROLBEFORE OPERATION MENU BAR SETTING MENUMENU BAR IN COMPUTER MODE Press MENU BUTTON while in Computer mode MODE MENUMENU BAR IN MCI MODE Press MENU BUTTON while in MCI modeVIEW MENU BASIC OPERATIONS Power off?TURNING ON / OFF THE PROJECTOR TURNING ON THE PROJECTORZOOM ADJUSTMENT ADJUSTING THE IMAGEFOCUS ADJUSTMENT KEYSTONE ADJUSTMENTSOUND VOLUME ADJUSTMENT SOUND ADJUSTMENTSOUND MUTE ADJUSTMENT BASIC OPERATION NO SHOW FUNCTIONSELECTING COMPUTER MODE COMPUTER MODESELECTING COMPUTER SYSTEM DIRECT OPERATIONCOMPUTER MODE PC ADJUSTMENTCloses the PC ADJUST Menu ResetTotal lines Total dotsCOMPUTER MODE COMPATIBLE COMPUTER SPECIFICATIONS NOTE Specifications are subject to change without noticeMAC LC13 ADJUST PICTURE IMAGE MANUALLY PICTURE IMAGE ADJUSTMENTNORMAL FUNCTION NormalCOMPUTER MODE AUTO IMAGE FUNCTION PICTURE POSITION ADJUSTMENTStarts the Auto Image Adjustment Closes the AUTO IMAGE ADJUSTMENT MenuTrue PICTURE SCREEN ADJUSTMENTKeystone Digital ZoomSELECTING VIDEO MODE VIDEO MODESELECTING COLOR SYSTEM RegularCloses the PICTURE IMAGE ADJUSTMENT Menu ADJUSTING THE PICTURE IMAGEColor TintHOW TO LOAD THE MEMORY CARD INTO THE PROJECTOR MCI MODEOPERATING THE PC CARD SLOT AVAILABLE DATA SELECTING MCI MODEAVAILABLE CARD Media Card ImagerINDEX SELECTION SHOW THE DATA IN THE MEMORY CARDPAGE SELECTION Index and PageWRITE DATA INTO THE MEMORY CARD ACCESS TO THE MEMORY CARD THROUGH THE PROJECTORADJUST THE PICTURE IMAGE MANUALLY PICTURE IMAGE ADJUSTMENTRecalls the data previously adjusted Stores the adjusted data in the memoryMCI MODE INSTALL / REMOVE THE SMARTMEDIA SMARTMEDIA AND PC CARD ADAPTERIMPORTANT NOTE PRECAUTIONS AND SPECIFICATIONS OF THE PC CARD ADAPTER MCI MODE PRECAUTIONS AND SPECIFICATIONS OF THE SMARTMEDIASETTING MENU SETTINGSELECTING LANGUAGE Blue backINSTALLATION OPERATING WIRELESS MOUSEOPERATING WIRELESS MOUSE APPENDIXTEMPERATURE WARNING INDICATOR MAINTENANCEAIR FILTER CARE AND CLEANING CLEANING THE PROJECTION LENSLAMP REPLACEMENT APPENDIX LAMP REPLACEMENT INDICATORLAMP REPLACEMENT MONITOR TIMER ORDER REPLACEMENT LAMPTROUBLESHOOTING ProblemTry these Solution Remote Control Unit TECHNICAL SPECIFICATIONS Control Cable for Serial Port OPTIONAL PARTSType No. POA-MCSRL Control Cable for ADB PortWARRANTY LIMITATION AND EXCLUSION LIMITED WARRANTYDISCLAIMER OR UNSTATED WARRANTIES LIMITATION OR LIABILITY