BOXLIGHT CP-33t manual Selecting Computer Mode, Selecting Computer System, Direct Operation

Page 23

COMPUTER MODE

COMPUTER MODE

SELECTING COMPUTER MODE

DIRECT OPERATION

Select COMPUTER mode by pressing the MODE button on the Top Control or the COMPUTER / MCI button on the Remote Control Unit.

MENU OPERATION

Press the MENU button and the ON-SCREEN MENU will appear.

Press the POINT LEFT/RIGHT buttons to select Computer and press the SELECT button.

CURRENT MODE DISPLAY

MODE button

COMPUTER

MCI

VIDEO

COMPUTER / MCI

button

COMPUTER

MCI

When selecting the Computer Mode, the Current Mode display appears. It shows the information of the computer of the mode selected.

Providing the information of the computer detected by the projector.

SELECTING COMPUTER SYSTEM

AUTOMATIC MULTISCANNING SYSTEM

This projector automatically tunes to most different types of computer based on VGA, SVGA, XGA or SXGA (refer to “COMPATIBLE COMPUTER SPECIFICATION” on page 26). When selecting Computer, this projector automatically tunes to the incoming signal and projects the proper image without any special setting. (Setting of the Computer System may be required when connecting some computers.)

Note : The projector may provides the messages below.

Go to PC adj.	The projector cannot discriminate or detect the
	input signal from the computer. Adjust and set the
	input signal from the computer. Adjust and set the
	computer system manually. (Refer to page 24.)
	There is no signal input from the computer. Make
No signal	There is no signal input from the computer. Make
	sure the connection of the computer and the
	sure the connection of the computer and the
	projector is set correctly.	(Refer to
	TROUBLESHOOTING on page 44.)

SELECT COMPUTER SYSTEM MANUALLY

To set the Computer system manually, select the mode on the ON-

SCREEN MENU.

1	Press the MENU button and the ON-SCREEN MENU will
1	appear. Press the POINT LEFT/RIGHT buttons to select
	SYSTEM and press the SELECT button. Another dialog box
	COMPUTER MODE Menu will appear.
2	Press the POINT DOWN button and a red-arrow icon will
2	appear. Move the arrow to the system that you want to set,

and then press SELECT button.

SYSTEM BOX

It displays the SYSTEM being selected.

The system being selected.

The systems on this dialog box can be selected.

Closes the SYS- TEM Menu.

23

Image 23

Contents USER’S GUIDE BOXLIGHTBOXLIGHT CP-33t RISK OF ELECTRIC SHOCK DO NOT OPEN SAFETY PRECAUTIONSTO THE OWNER INFORMATION TO THE USERIMPORTANT SAFETY INSTRUCTIONS 5 COMPUTER MODE TABLE OF CONTENTSFEATURES AND DESIGN SETTINGAccessories FEATURES AND DESIGNImage Resolution Other FeaturesNAME OF EACH PART OF THE PROJECTOR POWER CORD CONNECTORADJUSTABLE FEET AND FEET LOCK LATCHES PREPARATIONROOM LIGHT SETTING-UP THE PROJECTORADJUSTABLE FEET POSITIONING THE PROJECTORVENTILATION PREPARATION CONNECTING THE AC POWER CORDPREPARATION MOVING THE PROJECTOR CAUTION WHEN CARRYING OR TRANSPORTING THE PROJECTORS-VIDEO INPUT JACK VIDEO INPUT JACK CONNECTING THE PROJECTORCONTROL PORT CONNECTOR TERMINALS OF THE PROJECTORTerminals of the Projector CONNECTING TO THE VIDEO EQUIPMENTCONNECTING THE PROJECTOR Terminal CONNECTING TO THE COMPUTERTo connect to the computer, refer to the figure below Terminal TerminalMODE that you want to ing on the RESOLUTIONMAC ADAPTER Not supplied in the table below dependLASER POINTER FUNCTION OPERATION OF THE REMOTE CONTROLBEFORE OPERATION Left SideVOLUME BUTTON REMOTE CONTROL BATTERIES INSTALLATIONOperating Range 16.4’ 5 m 16.4’ 5 mREADY INDICATOR TOP CONTROLS AND INDICATORSPOWER ON-OFF BUTTON LAMP INDICATORWIRELESS REMOTE CONTROL HOW TO OPERATE ON-SCREEN MENUOPERATING ON-SCREEN MENU FLOW OF ON-SCREEN MENUMODE MENU SETTING MENUBEFORE OPERATION MENU BAR MENU BAR IN COMPUTER MODE Press MENU BUTTON while in Computer modeVIEW MENU MENU BAR IN MCI MODEPress MENU BUTTON while in MCI mode TURNING ON THE PROJECTOR Power off?BASIC OPERATIONS TURNING ON / OFF THE PROJECTORKEYSTONE ADJUSTMENT ADJUSTING THE IMAGEZOOM ADJUSTMENT FOCUS ADJUSTMENTBASIC OPERATION NO SHOW FUNCTION SOUND ADJUSTMENTSOUND VOLUME ADJUSTMENT SOUND MUTE ADJUSTMENTDIRECT OPERATION COMPUTER MODESELECTING COMPUTER MODE SELECTING COMPUTER SYSTEMCOMPUTER MODE PC ADJUSTMENTTotal dots ResetCloses the PC ADJUST Menu Total linesMAC LC13 COMPUTER MODE COMPATIBLE COMPUTER SPECIFICATIONSNOTE Specifications are subject to change without notice Normal PICTURE IMAGE ADJUSTMENTADJUST PICTURE IMAGE MANUALLY NORMAL FUNCTIONCloses the AUTO IMAGE ADJUSTMENT Menu PICTURE POSITION ADJUSTMENTCOMPUTER MODE AUTO IMAGE FUNCTION Starts the Auto Image AdjustmentDigital Zoom PICTURE SCREEN ADJUSTMENTTrue KeystoneRegular VIDEO MODESELECTING VIDEO MODE SELECTING COLOR SYSTEMTint ADJUSTING THE PICTURE IMAGECloses the PICTURE IMAGE ADJUSTMENT Menu ColorOPERATING THE PC CARD SLOT HOW TO LOAD THE MEMORY CARD INTO THE PROJECTORMCI MODE Media Card Imager SELECTING MCI MODEAVAILABLE DATA AVAILABLE CARDIndex and Page SHOW THE DATA IN THE MEMORY CARDINDEX SELECTION PAGE SELECTIONWRITE DATA INTO THE MEMORY CARD ACCESS TO THE MEMORY CARD THROUGH THE PROJECTORStores the adjusted data in the memory PICTURE IMAGE ADJUSTMENTADJUST THE PICTURE IMAGE MANUALLY Recalls the data previously adjustedKeystone IMPORTANT NOTE INSTALL / REMOVE THE SMARTMEDIASMARTMEDIA AND PC CARD ADAPTER PRECAUTIONS AND SPECIFICATIONS OF THE PC CARD ADAPTER MCI MODE PRECAUTIONS AND SPECIFICATIONS OF THE SMARTMEDIABlue back SETTINGSETTING MENU SELECTING LANGUAGEAPPENDIX OPERATING WIRELESS MOUSEINSTALLATION OPERATING WIRELESS MOUSECLEANING THE PROJECTION LENS MAINTENANCETEMPERATURE WARNING INDICATOR AIR FILTER CARE AND CLEANINGORDER REPLACEMENT LAMP APPENDIX LAMP REPLACEMENT INDICATORLAMP REPLACEMENT LAMP REPLACEMENT MONITOR TIMERTry these Solution TROUBLESHOOTINGProblem Remote Control Unit TECHNICAL SPECIFICATIONS Control Cable for ADB Port OPTIONAL PARTSControl Cable for Serial Port Type No. POA-MCSRLLIMITATION OR LIABILITY LIMITED WARRANTYWARRANTY LIMITATION AND EXCLUSION DISCLAIMER OR UNSTATED WARRANTIES