BOXLIGHT CP-33t Write Data Into The Memory Card, Access To The Memory Card Through The Projector

Page 35

WRITE DATA INTO THE MEMORY CARD

MCI MODE

WRITE DATA INTO THE MEMORY CARD

The data edited by Media Card Imager in the computer can be written to or read from the memory card with the PC Card drive of your Personal Computer or the PC CARD Slot of this projector.

The data edited by Media Card Imager is written in Bit Map type (BMP) or JPEG type (JPG).

ACCESS TO THE MEMORY CARD THROUGH THE PROJECTOR

If your computer doesn't have the PC card writing equipment, the data can be written or read by connecting with this projector.

NOTE : This operation can be made only by Media Card Imager in the Personal Computer.

Connect the projector to the Personal Computer with the Control Cable for Serial Port (optionally supplied / refer to page 12, 13).

1	Connect the projector to your computer with the Control Cable
1	for Serial Port (optionally supplied). (Refer to “CONNECTING
	COMPUTER” on Page 12, 13.)
	Insert the memory card into PC CARD SLOT of the projector.
	And then, turn on the projector first then the computer.
2	Press the MENU button and the ON-SCREEN MENU will
	appear. Press the POINT LEFT/RIGHT buttons to select View

and press the SELECT button. Another dialog box VIEW SETTING Menu will appear.

3	Press POINT DOWN button and a red arrow will appear. Move
	the arrow to Card access by pressing POINT UP/DOWN

button. And then press SELECT button. “Ready to access” is displayed.

Operate Media Card Imager of your computer to write/read the in the PC card. (Refer to Owner's Manual of Media Card Imager for operation.)

Move the arrow to each operation and press the SELECT button.

NOTE : Connect the projector to the computer with Control Cable before turning those appliances on.

Do not press any button while read/write operations are in progress. Those operations will be canceled and the data in the memory card may be damaged.

35

Image 35

Contents USER’S GUIDE BOXLIGHTBOXLIGHT CP-33t RISK OF ELECTRIC SHOCK DO NOT OPEN SAFETY PRECAUTIONSTO THE OWNER INFORMATION TO THE USERIMPORTANT SAFETY INSTRUCTIONS 5 COMPUTER MODE TABLE OF CONTENTSFEATURES AND DESIGN SETTINGAccessories FEATURES AND DESIGNImage Resolution Other FeaturesNAME OF EACH PART OF THE PROJECTOR POWER CORD CONNECTORADJUSTABLE FEET AND FEET LOCK LATCHES PREPARATIONROOM LIGHT SETTING-UP THE PROJECTORADJUSTABLE FEET POSITIONING THE PROJECTORVENTILATION PREPARATION CONNECTING THE AC POWER CORDPREPARATION MOVING THE PROJECTOR CAUTION WHEN CARRYING OR TRANSPORTING THE PROJECTORS-VIDEO INPUT JACK VIDEO INPUT JACK CONNECTING THE PROJECTORCONTROL PORT CONNECTOR TERMINALS OF THE PROJECTORTerminals of the Projector CONNECTING TO THE VIDEO EQUIPMENTCONNECTING THE PROJECTOR Terminal CONNECTING TO THE COMPUTERTo connect to the computer, refer to the figure below Terminal TerminalMODE that you want to ing on the RESOLUTIONMAC ADAPTER Not supplied in the table below dependLASER POINTER FUNCTION OPERATION OF THE REMOTE CONTROLBEFORE OPERATION Left SideVOLUME BUTTON REMOTE CONTROL BATTERIES INSTALLATIONOperating Range 16.4’ 5 m 16.4’ 5 mREADY INDICATOR TOP CONTROLS AND INDICATORSPOWER ON-OFF BUTTON LAMP INDICATORWIRELESS REMOTE CONTROL HOW TO OPERATE ON-SCREEN MENUOPERATING ON-SCREEN MENU FLOW OF ON-SCREEN MENUMODE MENU SETTING MENUBEFORE OPERATION MENU BAR MENU BAR IN COMPUTER MODE Press MENU BUTTON while in Computer modeVIEW MENU MENU BAR IN MCI MODEPress MENU BUTTON while in MCI mode TURNING ON THE PROJECTOR Power off?BASIC OPERATIONS TURNING ON / OFF THE PROJECTORKEYSTONE ADJUSTMENT ADJUSTING THE IMAGEZOOM ADJUSTMENT FOCUS ADJUSTMENTBASIC OPERATION NO SHOW FUNCTION SOUND ADJUSTMENTSOUND VOLUME ADJUSTMENT SOUND MUTE ADJUSTMENTDIRECT OPERATION COMPUTER MODESELECTING COMPUTER MODE SELECTING COMPUTER SYSTEMCOMPUTER MODE PC ADJUSTMENTTotal dots ResetCloses the PC ADJUST Menu Total linesMAC LC13 COMPUTER MODE COMPATIBLE COMPUTER SPECIFICATIONSNOTE Specifications are subject to change without notice Normal PICTURE IMAGE ADJUSTMENTADJUST PICTURE IMAGE MANUALLY NORMAL FUNCTIONCloses the AUTO IMAGE ADJUSTMENT Menu PICTURE POSITION ADJUSTMENTCOMPUTER MODE AUTO IMAGE FUNCTION Starts the Auto Image AdjustmentDigital Zoom PICTURE SCREEN ADJUSTMENTTrue KeystoneRegular VIDEO MODESELECTING VIDEO MODE SELECTING COLOR SYSTEMTint ADJUSTING THE PICTURE IMAGECloses the PICTURE IMAGE ADJUSTMENT Menu ColorOPERATING THE PC CARD SLOT HOW TO LOAD THE MEMORY CARD INTO THE PROJECTORMCI MODE Media Card Imager SELECTING MCI MODEAVAILABLE DATA AVAILABLE CARDIndex and Page SHOW THE DATA IN THE MEMORY CARDINDEX SELECTION PAGE SELECTIONWRITE DATA INTO THE MEMORY CARD ACCESS TO THE MEMORY CARD THROUGH THE PROJECTORStores the adjusted data in the memory PICTURE IMAGE ADJUSTMENTADJUST THE PICTURE IMAGE MANUALLY Recalls the data previously adjustedKeystone IMPORTANT NOTE INSTALL / REMOVE THE SMARTMEDIASMARTMEDIA AND PC CARD ADAPTER PRECAUTIONS AND SPECIFICATIONS OF THE PC CARD ADAPTER MCI MODE PRECAUTIONS AND SPECIFICATIONS OF THE SMARTMEDIABlue back SETTINGSETTING MENU SELECTING LANGUAGEAPPENDIX OPERATING WIRELESS MOUSEINSTALLATION OPERATING WIRELESS MOUSECLEANING THE PROJECTION LENS MAINTENANCETEMPERATURE WARNING INDICATOR AIR FILTER CARE AND CLEANINGORDER REPLACEMENT LAMP APPENDIX LAMP REPLACEMENT INDICATORLAMP REPLACEMENT LAMP REPLACEMENT MONITOR TIMERTry these Solution TROUBLESHOOTINGProblem Remote Control Unit TECHNICAL SPECIFICATIONS Control Cable for ADB Port OPTIONAL PARTSControl Cable for Serial Port Type No. POA-MCSRLLIMITATION OR LIABILITY LIMITED WARRANTYWARRANTY LIMITATION AND EXCLUSION DISCLAIMER OR UNSTATED WARRANTIES