BOXLIGHT CP-33t manual Picture Image Adjustment, Adjust Picture Image Manually, Normal Function

COMPUTER MODE

	PICTURE IMAGE ADJUSTMENT
	ADJUST PICTURE IMAGE MANUALLY
1	Press the MENU button and the ON-SCREEN MENU will
	appear. Press the POINT LEFT/RIGHT buttons to select
	IMAGE and press the SELECT button. Another dialog box
	PICTURE IMAGE ADJUSTMENT Menu will appear.
2	Press the POINT DOWN button and a red-arrow icon will
	appear. Move the arrow to the item that you want to change by

pressing the POINT UP/DOWN buttons. To change the value, press either the POINT RIGHT button or the POINT LEFT button.

Fine sync.

Adjust the picture as necessary to eliminate flicker from the display. (From 0 to 255.)

Total dots

The number of the total dots in one horizontal period. Adjust the number to match your PC image.

White balance (Red / Green / Blue)

Move the arrow to the color that you want to adjust. Press POINT LEFT button to lighten the color, and press POINT RIGHT button to deepen the color. (From 0 to 63.)

Contrast

Press POINT LEFT button to decrease contrast, and press POINT

RIGHT button to increase contrast. (From 0 to 63.)

Brightness

Press POINT LEFT button to adjust the image darker, and press

POINT RIGHT button to adjust brighter. (From 0 to 63.)

Each of the keys operates as follow.

Reset Recalls the data previously adjusted.

Stored Stores the adjusted data in the memory.

Quit Closes the PICTURE IMAGE ADJUSTMENT Menu.

Indicates the level of the item.

Move the arrow to the item and press

POINT RIGHT / LEFT button.

Close the PICTURE

IMAGE ADJUSTMENT

Menu.

NORMAL FUNCTION

The normal picture level is preset on this projector at the factory and can be restored anytime you press the NORMAL button (located on the Top Control or on the Remote Control Unit). The “Normal” display will be displayed on the screen for a few seconds.

Normal

27