BOXLIGHT CP-33t manual Mci Mode Precautions And Specifications Of The Smartmedia

Page 39

MCI MODE

MCI MODE

PRECAUTIONS AND SPECIFICATIONS OF THE SMARTMEDIA

●SmartMedia is a precision device. Do not bend it, drop it, subject it to strong forces or shocks or place where a strong static electrical charge can be generated.

●Do not touch the surface of the Contact Area with fingers or allow it to be stained with foreign materials. Store SmartMedia inside its protective case when it is not used.

●SmartMedia is a consumable item. The data may not be written in or read from SmartMedia indefinitely. Occasionally replace SmartMedia with new one.

Memory capacity : 8MB

Operating voltage : 3.3 V DC Usage environment

Temperature : 0~55 °C (during use)

-20~65 °C (during storage)

Humidity : less than 95% (during use, during storage)

CAUTION

Write Protect Sticker is not available for PC. When PC attempts to read the data from SmartMedia with Write Protect Sticker, it pro- vides the error messages or the control of PC becomes insecure because of the property of the interface. When the error messages are displayed, press any key to return to the normal display. It is recommended, however, SmartMedia should be used on PC with- out Write Protect Sticker.

①Contact Area

Data is written in Contact Area. Never scratch or stain this area.

➁Write Protect Area

Affix Write Protect Sticker onto Write Protect Area to prevent from accidental erasure.

➂Index Area

Affix Index Label onto Index Area.

PRECAUTIONS AND SPECIFICATIONS OF THE PC CARD ADAPTER

●Do not bend, drop, subject to strong forces or shocks or place where strong static electrical charge can be generated.

●Do not insert materials other than SmartMedia. The adapter may be damaged. Store PC Card Adapter inside its protective case when it is not used.

●Do not shake the adapter, turn off the appliances, or remove SmartMedia from the PC Card Adapter during writing or reading data. It may damage the data in SmartMedia.

Operating voltage : 5 V DC Usage environment

Temperature : 0~55 °C (during use) -20~65 °C (during storage)

Humidity : less than 95%

(during use, during storage)

This adapter can be adapted to only our SmartMedia indicated below.

Available SmartMedia : 3.3V / 5V, 2MB / 4MB / 8MB /16MB

39

Image 39

Contents BOXLIGHT BOXLIGHT CP-33tUSER’S GUIDE RISK OF ELECTRIC SHOCK DO NOT OPEN SAFETY PRECAUTIONSTO THE OWNER INFORMATION TO THE USERIMPORTANT SAFETY INSTRUCTIONS 5 COMPUTER MODE TABLE OF CONTENTSFEATURES AND DESIGN SETTINGAccessories FEATURES AND DESIGNImage Resolution Other FeaturesNAME OF EACH PART OF THE PROJECTOR POWER CORD CONNECTORADJUSTABLE FEET AND FEET LOCK LATCHES PREPARATIONROOM LIGHT SETTING-UP THE PROJECTORADJUSTABLE FEET POSITIONING THE PROJECTORVENTILATION PREPARATION CONNECTING THE AC POWER CORDPREPARATION MOVING THE PROJECTOR CAUTION WHEN CARRYING OR TRANSPORTING THE PROJECTORS-VIDEO INPUT JACK VIDEO INPUT JACK CONNECTING THE PROJECTORCONTROL PORT CONNECTOR TERMINALS OF THE PROJECTORCONNECTING TO THE VIDEO EQUIPMENT CONNECTING THE PROJECTORTerminals of the Projector Terminal CONNECTING TO THE COMPUTERTo connect to the computer, refer to the figure below Terminal TerminalMODE that you want to ing on the RESOLUTIONMAC ADAPTER Not supplied in the table below dependLASER POINTER FUNCTION OPERATION OF THE REMOTE CONTROLBEFORE OPERATION Left SideVOLUME BUTTON REMOTE CONTROL BATTERIES INSTALLATIONOperating Range 16.4’ 5 m 16.4’ 5 mREADY INDICATOR TOP CONTROLS AND INDICATORSPOWER ON-OFF BUTTON LAMP INDICATORWIRELESS REMOTE CONTROL HOW TO OPERATE ON-SCREEN MENUOPERATING ON-SCREEN MENU FLOW OF ON-SCREEN MENUMODE MENU SETTING MENUBEFORE OPERATION MENU BAR MENU BAR IN COMPUTER MODE Press MENU BUTTON while in Computer modeMENU BAR IN MCI MODE Press MENU BUTTON while in MCI modeVIEW MENU TURNING ON THE PROJECTOR Power off?BASIC OPERATIONS TURNING ON / OFF THE PROJECTORKEYSTONE ADJUSTMENT ADJUSTING THE IMAGEZOOM ADJUSTMENT FOCUS ADJUSTMENTBASIC OPERATION NO SHOW FUNCTION SOUND ADJUSTMENTSOUND VOLUME ADJUSTMENT SOUND MUTE ADJUSTMENTDIRECT OPERATION COMPUTER MODESELECTING COMPUTER MODE SELECTING COMPUTER SYSTEMCOMPUTER MODE PC ADJUSTMENTTotal dots ResetCloses the PC ADJUST Menu Total linesCOMPUTER MODE COMPATIBLE COMPUTER SPECIFICATIONS NOTE Specifications are subject to change without noticeMAC LC13 Normal PICTURE IMAGE ADJUSTMENTADJUST PICTURE IMAGE MANUALLY NORMAL FUNCTIONCloses the AUTO IMAGE ADJUSTMENT Menu PICTURE POSITION ADJUSTMENTCOMPUTER MODE AUTO IMAGE FUNCTION Starts the Auto Image AdjustmentDigital Zoom PICTURE SCREEN ADJUSTMENTTrue KeystoneRegular VIDEO MODESELECTING VIDEO MODE SELECTING COLOR SYSTEMTint ADJUSTING THE PICTURE IMAGECloses the PICTURE IMAGE ADJUSTMENT Menu ColorHOW TO LOAD THE MEMORY CARD INTO THE PROJECTOR MCI MODEOPERATING THE PC CARD SLOT Media Card Imager SELECTING MCI MODEAVAILABLE DATA AVAILABLE CARDIndex and Page SHOW THE DATA IN THE MEMORY CARDINDEX SELECTION PAGE SELECTIONWRITE DATA INTO THE MEMORY CARD ACCESS TO THE MEMORY CARD THROUGH THE PROJECTORStores the adjusted data in the memory PICTURE IMAGE ADJUSTMENTADJUST THE PICTURE IMAGE MANUALLY Recalls the data previously adjustedKeystone INSTALL / REMOVE THE SMARTMEDIA SMARTMEDIA AND PC CARD ADAPTERIMPORTANT NOTE PRECAUTIONS AND SPECIFICATIONS OF THE PC CARD ADAPTER MCI MODE PRECAUTIONS AND SPECIFICATIONS OF THE SMARTMEDIABlue back SETTINGSETTING MENU SELECTING LANGUAGEAPPENDIX OPERATING WIRELESS MOUSEINSTALLATION OPERATING WIRELESS MOUSECLEANING THE PROJECTION LENS MAINTENANCETEMPERATURE WARNING INDICATOR AIR FILTER CARE AND CLEANINGORDER REPLACEMENT LAMP APPENDIX LAMP REPLACEMENT INDICATORLAMP REPLACEMENT LAMP REPLACEMENT MONITOR TIMERTROUBLESHOOTING ProblemTry these Solution Remote Control Unit TECHNICAL SPECIFICATIONS Control Cable for ADB Port OPTIONAL PARTSControl Cable for Serial Port Type No. POA-MCSRLLIMITATION OR LIABILITY LIMITED WARRANTYWARRANTY LIMITATION AND EXCLUSION DISCLAIMER OR UNSTATED WARRANTIES