BOXLIGHT CP-33t manual Pc Adjustment, Computer Mode

Page 24

COMPUTER MODE

COMPUTER MODE

PC ADJUSTMENT

This Projector can automatically tune to the display signals from most personal computers currently distributed. However, some computers employ the special signal formats which are different from the standard ones and may not be tuned by Multiscanning of this projector. If this happens, the projector cannot reproduce a proper image and the image is recognized as a flickering picture, a non-synchronized picture, a non-centered picture or a skewed picture.

This projector has PC ADJUSTMENT function, to enable you to precisely adjust several parameters to match with those exceptional signal formats and the projector has five independent memory areas to memorize those parameters manually adjusted. This enables you to recall the setting for a specific computer whenever you use it.

1	Press the MENU button and the ON-SCREEN MENU will
	appear. Press the POINT RIGHT/LEFT buttons to select PC
	ADJUST	and press the SELECT button. Another dialog
	box “Where to reserve” Menu will appear.
2	In this dialog box, you can store the parameter into the area
	from “Mode 1” to “Mode 5.” When memorizing the new
	computer parameter, select the Mode with the message “Free”
	by pressing the POINT UP/DOWN buttons and the SELECT
	button. To change the parameters of the Mode previously set,
	select the Mode with “Stored.”
3	When the Mode is selected, Parameter adjustment dialog box
	appears. Move the arrow to the item that you want to change
	by pressing the POINT UP/DOWN buttons, and adjust each
	item to match with your computer. To change the value, press
	either the POINT RIGHT button or the POINT LEFT button.
	Refer to the next page for adjusting each item.
4	Move the arrow to “Stored” and press the SELECT button. The
	parameter is memorized in the selected Mode.
5	To activate the Mode manually adjusted in this PC
	ADJUSTMENT Menu, select the Mode at the SYSTEM

SELECT Menu. (Refer to page 23.)

This Mode has para- meters being stored.

The Vacant Mode.

Manual set Computer

Mode (1 to 5).

Close the PC

ADJUSTMENT Menu.

Press the POINT RIGHT/LEFT button(s) to adjust the value.

Press the SELECT button to set Full screen function on/off.

24

Image 24

Contents BOXLIGHT BOXLIGHT CP-33tUSER’S GUIDE SAFETY PRECAUTIONS TO THE OWNERINFORMATION TO THE USER RISK OF ELECTRIC SHOCK DO NOT OPENIMPORTANT SAFETY INSTRUCTIONS TABLE OF CONTENTS FEATURES AND DESIGNSETTING 5 COMPUTER MODEFEATURES AND DESIGN Image ResolutionOther Features AccessoriesPOWER CORD CONNECTOR ADJUSTABLE FEET AND FEET LOCK LATCHESPREPARATION NAME OF EACH PART OF THE PROJECTORSETTING-UP THE PROJECTOR ADJUSTABLE FEETPOSITIONING THE PROJECTOR ROOM LIGHTPREPARATION CONNECTING THE AC POWER CORD VENTILATIONCAUTION WHEN CARRYING OR TRANSPORTING THE PROJECTOR PREPARATION MOVING THE PROJECTORCONNECTING THE PROJECTOR CONTROL PORT CONNECTORTERMINALS OF THE PROJECTOR S-VIDEO INPUT JACK VIDEO INPUT JACKCONNECTING TO THE VIDEO EQUIPMENT CONNECTING THE PROJECTORTerminals of the Projector CONNECTING TO THE COMPUTER To connect to the computer, refer to the figure belowTerminal Terminal Terminaling on the RESOLUTION MAC ADAPTER Not suppliedin the table below depend MODE that you want toOPERATION OF THE REMOTE CONTROL BEFORE OPERATIONLeft Side LASER POINTER FUNCTIONREMOTE CONTROL BATTERIES INSTALLATION Operating Range16.4’ 5 m 16.4’ 5 m VOLUME BUTTONTOP CONTROLS AND INDICATORS POWER ON-OFF BUTTONLAMP INDICATOR READY INDICATORHOW TO OPERATE ON-SCREEN MENU OPERATING ON-SCREEN MENUFLOW OF ON-SCREEN MENU WIRELESS REMOTE CONTROLSETTING MENU BEFORE OPERATION MENU BARMENU BAR IN COMPUTER MODE Press MENU BUTTON while in Computer mode MODE MENUMENU BAR IN MCI MODE Press MENU BUTTON while in MCI modeVIEW MENU Power off? BASIC OPERATIONSTURNING ON / OFF THE PROJECTOR TURNING ON THE PROJECTORADJUSTING THE IMAGE ZOOM ADJUSTMENTFOCUS ADJUSTMENT KEYSTONE ADJUSTMENTSOUND ADJUSTMENT SOUND VOLUME ADJUSTMENTSOUND MUTE ADJUSTMENT BASIC OPERATION NO SHOW FUNCTIONCOMPUTER MODE SELECTING COMPUTER MODESELECTING COMPUTER SYSTEM DIRECT OPERATIONPC ADJUSTMENT COMPUTER MODEReset Closes the PC ADJUST MenuTotal lines Total dotsCOMPUTER MODE COMPATIBLE COMPUTER SPECIFICATIONS NOTE Specifications are subject to change without noticeMAC LC13 PICTURE IMAGE ADJUSTMENT ADJUST PICTURE IMAGE MANUALLYNORMAL FUNCTION NormalPICTURE POSITION ADJUSTMENT COMPUTER MODE AUTO IMAGE FUNCTIONStarts the Auto Image Adjustment Closes the AUTO IMAGE ADJUSTMENT MenuPICTURE SCREEN ADJUSTMENT TrueKeystone Digital ZoomVIDEO MODE SELECTING VIDEO MODESELECTING COLOR SYSTEM RegularADJUSTING THE PICTURE IMAGE Closes the PICTURE IMAGE ADJUSTMENT MenuColor TintHOW TO LOAD THE MEMORY CARD INTO THE PROJECTOR MCI MODEOPERATING THE PC CARD SLOT SELECTING MCI MODE AVAILABLE DATAAVAILABLE CARD Media Card ImagerSHOW THE DATA IN THE MEMORY CARD INDEX SELECTIONPAGE SELECTION Index and PageACCESS TO THE MEMORY CARD THROUGH THE PROJECTOR WRITE DATA INTO THE MEMORY CARDPICTURE IMAGE ADJUSTMENT ADJUST THE PICTURE IMAGE MANUALLYRecalls the data previously adjusted Stores the adjusted data in the memoryPICTURE SCREEN ADJUSTMENT INSTALL / REMOVE THE SMARTMEDIA SMARTMEDIA AND PC CARD ADAPTERIMPORTANT NOTE MCI MODE PRECAUTIONS AND SPECIFICATIONS OF THE SMARTMEDIA PRECAUTIONS AND SPECIFICATIONS OF THE PC CARD ADAPTERSETTING SETTING MENUSELECTING LANGUAGE Blue backOPERATING WIRELESS MOUSE INSTALLATIONOPERATING WIRELESS MOUSE APPENDIXMAINTENANCE TEMPERATURE WARNING INDICATORAIR FILTER CARE AND CLEANING CLEANING THE PROJECTION LENSAPPENDIX LAMP REPLACEMENT INDICATOR LAMP REPLACEMENTLAMP REPLACEMENT MONITOR TIMER ORDER REPLACEMENT LAMPTROUBLESHOOTING ProblemTry these Solution Remote Control Unit TECHNICAL SPECIFICATIONS OPTIONAL PARTS Control Cable for Serial PortType No. POA-MCSRL Control Cable for ADB PortLIMITED WARRANTY WARRANTY LIMITATION AND EXCLUSIONDISCLAIMER OR UNSTATED WARRANTIES LIMITATION OR LIABILITY