BOXLIGHT CP-33t Picture Image Adjustment, Adjust The Picture Image Manually, Mci Mode, Normal

Page 36

PICTURE IMAGE ADJUSTMENT

MCI MODE

		PICTURE IMAGE ADJUSTMENT
		ADJUST THE PICTURE IMAGE MANUALLY
1	Press the MENU button and the ON-SCREEN MENU will
	appear. Press the POINT LEFT/RIGHT buttons to select
	IMAGE	and press the SELECT button. Another dialog box
	PICTURE IMAGE ADJUSTMENT Menu will appear.
2	Press the POINT DOWN button and a red-arrow icon will
2	appear.	Move the arrow to the item by pressing the POINT

UP/DOWN buttons. To change the value press either the

POINT RIGHT button or the POINT LEFT button.

White balance (Red / Green / Blue)

Move the arrow to the color that you want to adjust. Press POINT LEFT button to lighten the color, and press POINT RIGHT button to deepen the color. (From 0 to 63.)

Contrast

Press POINT LEFT button to decrease contrast, and press POINT

RIGHT button to increase contrast. (From 0 to 63.)

Brightness

Press POINT LEFT button to darken the image, and press POINT

RIGHT button to brighten the image. (From 0 to 63.)

Each of the keys operates as follow.

Reset	Recalls the data previously adjusted.

Stored	Stores the adjusted data in the memory.

Quit	Closes the PICTURE IMAGE ADJUSTMENT Menu.

NORMAL FUNCTION
The normal picture level is preset on this projector at the factory and

can be restored anytime you press the NORMAL button (located on				Normal
the Top Control or on the Remote Control Unit). The "Normal"
display will be displayed on the screen for a few seconds.

Indicates the roughly level of the item.

Move the arrow to the item and press

POINT RIGHT / LEFT button.

Close the PICTURE

IMAGE ADJUSTMENT

Menu.

PICTURE POSITION ADJUSTMENT

The position of the image can be adjusted vertically and horizontally through PICTURE POSITION ADJUSTMENT.

1	Press the MENU button and the ON-SCREEN MENU will
	appear. Press the POINT LEFT/RIGHT buttons to select
	POSITION	and press the SELECT button. The PICTURE
	POSITION dialog box will appear.
2	Move the image by pressing the POINT UP / DOWN / RIGHT /
	LEFT buttons.

To cancel POSITION mode, press the any buttons except SELECT, RIGHT CLICK, POINT, AUTO IMAGE, PAGE ▲/▼ or LASER button. To recall the position previously adjusted, press NORMAL button.

PICTURE POSITION

dialog box

Press the POINT UP /

DOWN / RIGHT / LEFT buttons to move the image

36

Image 36

Contents BOXLIGHT BOXLIGHT CP-33tUSER’S GUIDE SAFETY PRECAUTIONS TO THE OWNERINFORMATION TO THE USER RISK OF ELECTRIC SHOCK DO NOT OPENIMPORTANT SAFETY INSTRUCTIONS TABLE OF CONTENTS FEATURES AND DESIGNSETTING 5 COMPUTER MODEFEATURES AND DESIGN Image ResolutionOther Features AccessoriesPOWER CORD CONNECTOR ADJUSTABLE FEET AND FEET LOCK LATCHESPREPARATION NAME OF EACH PART OF THE PROJECTORSETTING-UP THE PROJECTOR ADJUSTABLE FEETPOSITIONING THE PROJECTOR ROOM LIGHTPREPARATION CONNECTING THE AC POWER CORD VENTILATIONCAUTION WHEN CARRYING OR TRANSPORTING THE PROJECTOR PREPARATION MOVING THE PROJECTORCONNECTING THE PROJECTOR CONTROL PORT CONNECTORTERMINALS OF THE PROJECTOR S-VIDEO INPUT JACK VIDEO INPUT JACKCONNECTING TO THE VIDEO EQUIPMENT CONNECTING THE PROJECTORTerminals of the Projector CONNECTING TO THE COMPUTER To connect to the computer, refer to the figure belowTerminal Terminal Terminaling on the RESOLUTION MAC ADAPTER Not suppliedin the table below depend MODE that you want toOPERATION OF THE REMOTE CONTROL BEFORE OPERATIONLeft Side LASER POINTER FUNCTIONREMOTE CONTROL BATTERIES INSTALLATION Operating Range16.4’ 5 m 16.4’ 5 m VOLUME BUTTONTOP CONTROLS AND INDICATORS POWER ON-OFF BUTTONLAMP INDICATOR READY INDICATORHOW TO OPERATE ON-SCREEN MENU OPERATING ON-SCREEN MENUFLOW OF ON-SCREEN MENU WIRELESS REMOTE CONTROLSETTING MENU BEFORE OPERATION MENU BARMENU BAR IN COMPUTER MODE Press MENU BUTTON while in Computer mode MODE MENUMENU BAR IN MCI MODE Press MENU BUTTON while in MCI modeVIEW MENU Power off? BASIC OPERATIONSTURNING ON / OFF THE PROJECTOR TURNING ON THE PROJECTORADJUSTING THE IMAGE ZOOM ADJUSTMENTFOCUS ADJUSTMENT KEYSTONE ADJUSTMENTSOUND ADJUSTMENT SOUND VOLUME ADJUSTMENTSOUND MUTE ADJUSTMENT BASIC OPERATION NO SHOW FUNCTIONCOMPUTER MODE SELECTING COMPUTER MODESELECTING COMPUTER SYSTEM DIRECT OPERATIONPC ADJUSTMENT COMPUTER MODEReset Closes the PC ADJUST MenuTotal lines Total dotsCOMPUTER MODE COMPATIBLE COMPUTER SPECIFICATIONS NOTE Specifications are subject to change without noticeMAC LC13 PICTURE IMAGE ADJUSTMENT ADJUST PICTURE IMAGE MANUALLYNORMAL FUNCTION NormalPICTURE POSITION ADJUSTMENT COMPUTER MODE AUTO IMAGE FUNCTIONStarts the Auto Image Adjustment Closes the AUTO IMAGE ADJUSTMENT MenuPICTURE SCREEN ADJUSTMENT TrueKeystone Digital ZoomVIDEO MODE SELECTING VIDEO MODESELECTING COLOR SYSTEM RegularADJUSTING THE PICTURE IMAGE Closes the PICTURE IMAGE ADJUSTMENT MenuColor TintHOW TO LOAD THE MEMORY CARD INTO THE PROJECTOR MCI MODEOPERATING THE PC CARD SLOT SELECTING MCI MODE AVAILABLE DATAAVAILABLE CARD Media Card ImagerSHOW THE DATA IN THE MEMORY CARD INDEX SELECTIONPAGE SELECTION Index and PageACCESS TO THE MEMORY CARD THROUGH THE PROJECTOR WRITE DATA INTO THE MEMORY CARDPICTURE IMAGE ADJUSTMENT ADJUST THE PICTURE IMAGE MANUALLYRecalls the data previously adjusted Stores the adjusted data in the memoryPICTURE SCREEN ADJUSTMENT INSTALL / REMOVE THE SMARTMEDIA SMARTMEDIA AND PC CARD ADAPTERIMPORTANT NOTE MCI MODE PRECAUTIONS AND SPECIFICATIONS OF THE SMARTMEDIA PRECAUTIONS AND SPECIFICATIONS OF THE PC CARD ADAPTERSETTING SETTING MENUSELECTING LANGUAGE Blue backOPERATING WIRELESS MOUSE INSTALLATIONOPERATING WIRELESS MOUSE APPENDIXMAINTENANCE TEMPERATURE WARNING INDICATORAIR FILTER CARE AND CLEANING CLEANING THE PROJECTION LENSAPPENDIX LAMP REPLACEMENT INDICATOR LAMP REPLACEMENTLAMP REPLACEMENT MONITOR TIMER ORDER REPLACEMENT LAMPTROUBLESHOOTING ProblemTry these Solution Remote Control Unit TECHNICAL SPECIFICATIONS OPTIONAL PARTS Control Cable for Serial PortType No. POA-MCSRL Control Cable for ADB PortLIMITED WARRANTY WARRANTY LIMITATION AND EXCLUSIONDISCLAIMER OR UNSTATED WARRANTIES LIMITATION OR LIABILITY