BOXLIGHT CP-33t Selecting Mci Mode, Available Data, Available Card, Media Card Imager, Video

Page 33

AVAILABLE DATA

AVAILABLE DATA

This projector can project the image data as follows through the PC CARD SLOT.

●The data edited by “Media Card Imager.”

●The data of the resolution between VGA (640 X 480) and SXGA (1280 X 1024) in Bit Map type (BMP) or JPEG type (JPG), such as Digital Camera data, can be also displayed.

(Some image data in XGA size may not be displayed properly. In that case, reset the resolution lower.)

Refer to “SHOW THE DATA IN THE MEMORY CARD” on page 34 to display the image data.

Media Card Imager

Media Card Imager (CD-ROM) is supplied with this projector to edit the image data for projecting. Installation of Media Card Imager is recommended. Refer to Owner’s Manual of Media Card Imager for installation and operation.

AVAILABLE CARD

SmartMedia (with PC Card Adapter) or a Type PCMCIA-ATA Card can be used with this projector. (Those memory cards are supplied with this projector.)

Refer to SMARTMEDIA AND PC CARD ADAPTER on pages 38 and 39 for operation.

NOTE : Some PCMCIA Adapters or PC Cards are not available for this projector and cannot provide the image data. In that case, use our SmartMedia and PC Card Adapter.

SELECTING MCI MODE

When the memory card is inserted into PC CARD SLOT, MCI mode is automatically selected and the first Page of the latest Index is projected onto the screen. To switch to MCI mode manually, operate as follows.

DIRECT OPERATION

Select MCI mode by pressing the MODE button on the Top Control or the COMPUTER / MCI button on the Remote Control Unit.

MODE button

COMPUTER

COMPUTER / MCI

button

COMPUTER

MCI

MCI

VIDEO

MENU OPERATION

Press the MENU button and the ON-SCREEN MENU will appear.

Press the POINT LEFT/RIGHT buttons to select MCI and press the SELECT button.

33

Image 33

Contents BOXLIGHT BOXLIGHT CP-33tUSER’S GUIDE TO THE OWNER SAFETY PRECAUTIONSINFORMATION TO THE USER RISK OF ELECTRIC SHOCK DO NOT OPENIMPORTANT SAFETY INSTRUCTIONS FEATURES AND DESIGN TABLE OF CONTENTSSETTING 5 COMPUTER MODEImage Resolution FEATURES AND DESIGNOther Features AccessoriesADJUSTABLE FEET AND FEET LOCK LATCHES POWER CORD CONNECTORPREPARATION NAME OF EACH PART OF THE PROJECTORADJUSTABLE FEET SETTING-UP THE PROJECTORPOSITIONING THE PROJECTOR ROOM LIGHTVENTILATION PREPARATION CONNECTING THE AC POWER CORDPREPARATION MOVING THE PROJECTOR CAUTION WHEN CARRYING OR TRANSPORTING THE PROJECTORCONTROL PORT CONNECTOR CONNECTING THE PROJECTORTERMINALS OF THE PROJECTOR S-VIDEO INPUT JACK VIDEO INPUT JACKCONNECTING TO THE VIDEO EQUIPMENT CONNECTING THE PROJECTORTerminals of the Projector To connect to the computer, refer to the figure below CONNECTING TO THE COMPUTERTerminal Terminal TerminalMAC ADAPTER Not supplied ing on the RESOLUTIONin the table below depend MODE that you want toBEFORE OPERATION OPERATION OF THE REMOTE CONTROLLeft Side LASER POINTER FUNCTIONOperating Range REMOTE CONTROL BATTERIES INSTALLATION16.4’ 5 m 16.4’ 5 m VOLUME BUTTONPOWER ON-OFF BUTTON TOP CONTROLS AND INDICATORSLAMP INDICATOR READY INDICATOROPERATING ON-SCREEN MENU HOW TO OPERATE ON-SCREEN MENUFLOW OF ON-SCREEN MENU WIRELESS REMOTE CONTROLBEFORE OPERATION MENU BAR SETTING MENUMENU BAR IN COMPUTER MODE Press MENU BUTTON while in Computer mode MODE MENUMENU BAR IN MCI MODE Press MENU BUTTON while in MCI modeVIEW MENU BASIC OPERATIONS Power off?TURNING ON / OFF THE PROJECTOR TURNING ON THE PROJECTORZOOM ADJUSTMENT ADJUSTING THE IMAGEFOCUS ADJUSTMENT KEYSTONE ADJUSTMENTSOUND VOLUME ADJUSTMENT SOUND ADJUSTMENTSOUND MUTE ADJUSTMENT BASIC OPERATION NO SHOW FUNCTIONSELECTING COMPUTER MODE COMPUTER MODESELECTING COMPUTER SYSTEM DIRECT OPERATIONCOMPUTER MODE PC ADJUSTMENTCloses the PC ADJUST Menu ResetTotal lines Total dotsCOMPUTER MODE COMPATIBLE COMPUTER SPECIFICATIONS NOTE Specifications are subject to change without noticeMAC LC13 ADJUST PICTURE IMAGE MANUALLY PICTURE IMAGE ADJUSTMENTNORMAL FUNCTION NormalCOMPUTER MODE AUTO IMAGE FUNCTION PICTURE POSITION ADJUSTMENTStarts the Auto Image Adjustment Closes the AUTO IMAGE ADJUSTMENT MenuTrue PICTURE SCREEN ADJUSTMENTKeystone Digital ZoomSELECTING VIDEO MODE VIDEO MODESELECTING COLOR SYSTEM RegularCloses the PICTURE IMAGE ADJUSTMENT Menu ADJUSTING THE PICTURE IMAGEColor TintHOW TO LOAD THE MEMORY CARD INTO THE PROJECTOR MCI MODEOPERATING THE PC CARD SLOT AVAILABLE DATA SELECTING MCI MODEAVAILABLE CARD Media Card ImagerINDEX SELECTION SHOW THE DATA IN THE MEMORY CARDPAGE SELECTION Index and PageWRITE DATA INTO THE MEMORY CARD ACCESS TO THE MEMORY CARD THROUGH THE PROJECTORADJUST THE PICTURE IMAGE MANUALLY PICTURE IMAGE ADJUSTMENTRecalls the data previously adjusted Stores the adjusted data in the memoryMCI MODE INSTALL / REMOVE THE SMARTMEDIA SMARTMEDIA AND PC CARD ADAPTERIMPORTANT NOTE PRECAUTIONS AND SPECIFICATIONS OF THE PC CARD ADAPTER MCI MODE PRECAUTIONS AND SPECIFICATIONS OF THE SMARTMEDIASETTING MENU SETTINGSELECTING LANGUAGE Blue backINSTALLATION OPERATING WIRELESS MOUSEOPERATING WIRELESS MOUSE APPENDIXTEMPERATURE WARNING INDICATOR MAINTENANCEAIR FILTER CARE AND CLEANING CLEANING THE PROJECTION LENSLAMP REPLACEMENT APPENDIX LAMP REPLACEMENT INDICATORLAMP REPLACEMENT MONITOR TIMER ORDER REPLACEMENT LAMPTROUBLESHOOTING ProblemTry these Solution Remote Control Unit TECHNICAL SPECIFICATIONS Control Cable for Serial Port OPTIONAL PARTSType No. POA-MCSRL Control Cable for ADB PortWARRANTY LIMITATION AND EXCLUSION LIMITED WARRANTYDISCLAIMER OR UNSTATED WARRANTIES LIMITATION OR LIABILITY