BOXLIGHT XD-10m manual Advanced Menu, Rear Projection, Reset

Page 31

Advanced Menu

To access the Advanced menu settings, press the menu/select but- ton to display the Main menu, press the down arrow to highlight Advanced, then press menu/select again to access the Advanced menu.

FIGURE 18

Advanced menu

Rear Projection

When you turn Rear Projection on, the projector reverses the image so you can project from behind a translucent screen. Highlight Rear Projection, press menu/select, then press the up or down arrow buttons to turn this feature off and on.

Reset

Highlight Reset then press menu/select to reset the options in the menus (except Language, Video Standard, and Rear Projection) to their original settings.

23

Image 31

Contents Page FCC Warning Canada Safety CertificationsEN 55022 Warning Trademarks Declaration of ConformityPage Table of Contents Index AppendixSafety Definitions Safety Symbols Safety InstructionsSafety Terms Important Operating Considerations Customer ServiceUnpacking the Projector Image ResolutionIntroduction CompatibilityT r o d u c t i o n Usage Guidelines If You Need Assistance WarrantyMake sure the projector and the computer are turned off Setting UP the ProjectorT t i n g O j e c t o r Connecting a Computer Connecting a Video Player Turning Off the Projector Powering up the Projector and Adjusting the ImageT t i n g O j e c t o r Basic Image Adjustment Using the ProjectorAdjusting the Projector I n g O j e c t o r Using the Remote Control Menu/select Using the Keypad and Remote ButtonsSource keypad only or Data and Video remote only Up/down arrow buttons Reset keypad onlyKeystone + remote only Forward/back buttons remote onlyUsing the On-Screen Menus Keystone Display MenuBrightness Blank screen ContrastTint ColorResize Image Menu for Computer SourcesAuto Image Vertical Position Manual Sync Manual Tracking Horizontal PositionVideo Standard video sources only Image Menu for Video SourcesControl Menu Default SourceAuto Source Advanced Menu ResetRear Projection Language Menu Source Computer resolutionStatus Menu Lamp hours usedI n g O j e c t o r Cleaning the Lens Maintenance & TroubleshootingReplacing the Projection Lamp Pull the yellow tab on the lamp module Loosen the captive screw on the lamp module I n t e n a n c e Troubleshooting Using the Security Lock Replacing the Batteries in the Remote ControlProblem Only the start-up screen displays Troubleshooting Problem The projector is not runningProblem Image is too wide or narrow for screen Problem Color or text not being projectedProblem The screen resolution is not right Problem Image isn’t centered on the screenCall Boxlight at 1-800-762-5757 or Problem Image is noisy or streakedProblem Lamp seems to be getting dimmer Problem Lamp shuts offAppendix SpecificationsStandard Accessories ship with the projector AccessoriesOptional Accessories Key command to Computer Activate port De-activate port Portable and Laptop Activation ChartFN-F6 FN-F4 FN-F1 NCR Wyse Software driven Zenith FN-F10 Using SimulScan Using Video Mirroring with a PowerBook ComputerImage Width Projected Image SizeDistance to screen Diagonal Maximum MinimumIndex D e Page D e Limited Warranty Limitation of Liability