BenQ MP522 Picture menu Source 4. System Setup menuBasic menu, Tint, Sharpness, Brilliant Color

Page 43

2. PICTURE menu

3. SOURCE 4. SYSTEM SETUP: menuBasic menu

FUNCTION

DESCRIPTION (default setting/value)

(default setting/

value)

 

Tint

Adjusts the red and green color tones of the image. See "Adjusting

Tint" on page 34 for details.

(0)

The function is only available when Video or S-Video with NTSC

 

system is selected.

Sharpness

Adjusts the image to make it look sharper or softer. See "Adjusting

Sharpness" on page 34 for details.

(15)

 

Brilliant Color

Adjusts white peaking while maintaining correct color presentation.

(On)

See "Adjusting Brilliant Color" on page 34 for details.

 

Color

See "Selecting a Color Temperature" on page 34 for details.

Temperature

 

(T1)

 

3D Color

See "3D Color Management" on page 34 for details.

Management

Save Settings

Saves the settings made for User 1 or User 2 mode.

Quick Auto

 

Search

See "Switching input signal" on page 28 for details.

(On)

 

 

Reminds the presenter to finish the presentation within a certain time

 

frame. See "Setting the presentation timer" on page 36 for details.

 

Timer period (15 min.)

Presentation

Sets a preferred length of time for presentation.

Timer display (Always)

Timer

Sets whether to display the timer on screen.

(Off)

Timer position (Top-Left)

 

 

Sets the position where the timer displays on screen.

 

Timer counting direction (Count Down)

 

Sets the timer counting direction.

Language

Sets the language for the On-Screen Display (OSD) menus. See "Using

the menus" on page 25 for details.

(English)

 

 

 

Operation 43

Image 43
Contents MP512/MP513/MP522 Digital Projector WelcomeTable of contents Do not look straight at the projector Important safety instructionsRefer servicing to qualified service personnel Future reference Projector lamp is onSafety Instructions Do not block the ventilation holes Ceiling mounting the projector Introduction Projector featuresIntroduction Shipping contents External control panel Projector exterior viewFront/upper side Rear/lower sideProjector Controls and functionsRemote control Pull out the battery holder Remote control effective rangeChoosing a location Positioning your projectorObtaining a preferred projected image size Page MP513/MP522 projection dimensions 12000 457 MP512 projection dimensionsTo connect the projector to a notebook or desktop computer Connecting a computer or monitorConnecting a computer ConnectionTo connect the projector to a monitor Connecting a monitorLeast video quality Connecting Video source devicesBest video quality Better video qualityTo connect the projector to a Component Video source device Connecting a Component Video source deviceTo connect the projector to an S-Video source device Connecting an S-Video source deviceAV device Video cable To connect the projector to a composite Video source device Connecting a composite Video source deviceStarting up the projector OperationOperation Use / to highlight the System Setup Basic menu Using the menusSecurity Settings Utilizing the password functionSetting a password If you forget the passwordEnter a new password Entering the password recall procedureChanging the password Disabling the password functionAdjusting the projected image Switching input signalAdjusting the projection angle Fine-tuning the image size and clarity Auto-adjusting the imageImage or press Magnifying and searching for detailsCorrecting keystone Displays PressUse of the screen without altering the images aspect Ratio Selecting the aspect ratioVideo input signals S-Video, Video, D-Sub / Comp. YPbPr Selecting a picture modePicture modes for different types of signals PC input signals D-Sub / Comp. analog RGBAdjusting Brightness Using Wall ColorFine-tuning the image quality in user modes Setting the User 1/User 2 modeAdjusting Brilliant Color Adjusting ColorAdjusting Tint Adjusting SharpnessPress Mode/Enter and the 3D Color Management page displays Top-Left Bottom-Left Top- Right Bottom-Right Setting the presentation timerHiding the image To cancel the timer, perform the following stepsHow to use the Timer On key? Or go to the System Setup Basic PanelFreezing the image Utilizing FAQ functionOperating in a high altitude environment Shutting down the projector Personalizing the projector menu displayMenu system Menu operationMain menu Sub-menu Options Security System Setup AdvancedSettings Power on lock On/Off BasicDescription of each menu Timer Picture menu Source 4. System Setup menuBasic menuTemperature 3D Color Save SettingsSleep Timer System Setup Basic menu AdvancedAuto Power Blank TimerSub Output System Setup Advanced menuReset All Standby DCurrent FAQ-Image InstallationFeatures Service Information menuCare of the projector MaintenanceGetting to know the lamp hour Setting Lamp mode as EconomicSetting Auto Power Off Lamp informationTiming of replacing the lamp Replacing the lamp Loosen the screw that secures the lamp MaintenanceMaintenance Tighten the screw that secures the lamp Resetting the lamp timerSetup Advanced Lamp Settings menu Displays. Press to highlight Reset lampIndicators Troubleshooting Projector specifications SpecificationsResolution Horizontal Vertical Pixel Mode Frequency KHz MHz DimensionsMm W x 90 mm H x 214 mm D 255 61.5 15.63 50.00 15.73 Specifications15.73 59.94 31.47 59.94Limited warranty Warranty and Copyright informationFCC statement Regulation statements