BenQ MP513 System Setup Basic menu Advanced, Menu, Projector, Auto Power, Off, Blank Timer, Lock

4. SYSTEM SETUP: Basic menu

Advanced	5. SYSTEM
menu	SETUP:

FUNCTION	DESCRIPTION (default setting/value)
(default setting/
value)
Projector	The projector can be installed on a ceiling or behind a screen, or with
	one or more mirrors. See "Choosing a location" on page 13 for details.
Position
(Front Table)
Auto Power	Allows the projector to turn off automatically if no input signal is
	detected after a set period of time. See "Setting Auto Power Off" on
Off
	page 48 for details.
(Disable)
Blank Timer	Sets the image blank time when the Blank feature is activated, once
	elapsed the image will return to the screen. See "Hiding the image" on
(Disable)
	page 37 for details.
Panel Key	Disables or enables all panel key functions except II Power on the
Lock	projector and keys on the remote control. See "Locking control keys"
(Off)	on page 37 for details.
Sleep Timer	Sets the auto-shutdown timer. The timer can be set to a value between
	30 minutes and 12 hours.
(Disable)
Splash	Allows you to select which logo screen will display during projector
	start-up. Three options are available: BenQ logo, Black screen, or Blue
Screen
	screen.
(BenQ logo)
Quick	Selecting On enables the function and the projector cooling time will
	be shortened to a few seconds.
Cooling	If you attempt to restart the projector right after the quick
(On)	cooling process, it may not be turned on successfully and will
	rerun its cooling fans.
High Altitude	A mode for operation in high altitude areas. See "Operating in a high
Mode	altitude environment" on page 38 for details.
(Off)
	Menu display time (15 sec)
Menu	Sets the length of time the OSD will remain active after your last key
	press. The range is from 5 to 30 seconds in 5-second increments.
Settings	Menu position (Center)
	Sets the On-Screen Display (OSD) menu position.

44 Operation