BenQ MX761 System Setup Advanced menu Function Description, Baud Rate, Test Pattern, Closed

Page 60

5. SYSTEM SETUP: Advanced menu

Function

Description

 

Selects a baud rate that is identical with your computer’s so that you can

Baud Rate

connect the projector using a suitable RS-232 cable and update or

download the projector’s firmware. This function is intended for

 

 

qualified service personnel.

 

 

Test Pattern

Selecting On enables the function and the projector displays the grid test

pattern. It helps you adjust the image size and focus and check that the

 

projected image is free from distortion.

 

 

 

Closed Caption Enable

 

Activates the function by selecting On when the selected input signal

 

carries closed captions.

 

• Captions: An on-screen display of the dialogue, narration, and

Closed

sound effects of TV programs and videos that are closed captioned

(usually marked as "CC" in TV listings).

Caption

Set your screen aspect ratio to 4:3. This function is not available

 

when the aspect ratio is “16:9” or “Real”.

 

Caption Version

 

Selects a preferred closed captioning mode. To view captions, select

 

CC1, CC2, CC3, or CC4 (CC1 displays captions in the primary language

 

in your area).

 

 

 

Network

 

Selecting On enables the function. The projector is able to provide the

 

network function when it is in standby mode.

 

Microphone

 

Selecting On enables the function. The projector can output the

 

microphone signal when it is in standby mode and all the necessary

Standby

equipment is correctly connected. See "Playing sound through the

projector" on page 19 for details.

Settings

Monitor Out

 

 

Selecting On enables the function. The projector can output a VGA

 

signal when it is in standby mode and the COMPUTER 1 jack is

 

correctly connected to devices. See "Connection" on page 17 for how to

 

make the connection.

 

Enabling this function slightly increases the standby power

 

consumption.

 

Wired LAN

Network

Wireless LAN

Remote Desktop

Settings

See "Controlling the projector through a LAN environment" on page 38

 

 

for details.

 

 

 

Returns all settings to the factory preset values.

Reset All

The following settings will still remain: Phase, H. Size, User 1, User

Settings

2, Color Space Conversion, Language, Projector Position, High

 

Altitude Mode, Security Settings, Remote Receiver, DHCP, SSID,

 

Remote Desktop and Baud Rate.

60 Operation

Page 59 Page 61
Image 60
Page 59 Page 61
Contents Welcome MX760/MX761 Digital ProjectorTable of contents Important safety instructions Safety InstructionsRefer servicing to qualified service personnel Important safety instructionsSafety Instructions Locations near fire alarms Locations with an ambient temperatureLocations where the altitudes are higher Confined. Allow at least 50 cm clearanceInstalled It from the power supplys power outletServiced Do not step on the projector or placeProjector features IntroductionIntroduction Shipping contents Projector exterior view Rear/lower sidePower indicator light Focus ringZoom ring LeftRemote control TestAuto Keystone/Arrow buttons / Up DownOperating the Laser pointer MuteMIC/VOL + Numeric buttonsRemote control effective range Replacing the remote control batteriesApprox.+15º Positioning your projector Choosing a locationFront Table Front CeilingProjection dimensions Obtaining a preferred projected image sizeWhen the projector position is fixed Shifting the projection lensConnection Video cable Hdmi cable ConnectionConnecting video source devices Connecting audioTerminal name Terminal appearance BestPlaying sound through the projector About the microphone inputDevice Page Operation Starting up the projectorOperation Adjusting the projected image Adjusting the projection angleAuto-adjusting the image Fine-tuning the image size and clarityCorrecting keystone Using the menus Following example describes how to set the OSD languageUse / to highlight the System Setup Basic menu Using a security cable lock Utilizing the password functionSetting a password Highlight Change Security Settings and press MODE/ENTERIf you forget the password Entering the password recall procedureChanging the password Write down the number and turn off your projectorDisabling the password function Switching input signal Changing Color SpaceMagnifying and searching for details Selecting the aspect ratioProjectors native resolution in its Displayed in the center AdjustmentsAbout the aspect ratio Screen with a 169 aspect ratioUsing Wall Color Selecting a picture modeSetting the User 1/User 2 mode Go to the Picture Picture Mode menuFine-tuning the image quality in user modes Press To highlight Saturation and adjust its Every adjustment made will reflect to3D Color Management Range at 0, only pure red in the projectedSetting the presentation timer To cancel the timer, perform the following stepsCount Up Increases from 0 to the preset time Count Down Selection DescriptionUtilizing FAQ function Remote paging operationsFreezing the image Hiding the imageTo activate the High Altitude Mode Using the remote controlLocking control keys Operating in a high altitude environmentAdjusting the sound Adjusting the sound levelAdjusting the microphone volume Turning off the Power On/Off Ring ToneControlling the projector through a LAN environment Cable connectionIf you are in a Dhcp environment If you are in a non-DHCP environmentWireless connection Highlight Wireless LAN and press MODE/ENTERControlling the projector remotely through a web browser Page Page Iii Operation Page Operation Page Downloading and installing Q Presenter Using Q PresenterDisplaying images through Q Presenter Operation Operation Presenting from a USB Reader Direct power off Once the cooling process finishes, a Power Off RingShutting down the projector Menu operation Menu systemMain menu Sub-menu Options BasicAdvanced Advanced Network Description of each menu Picture Mode TemperatureManagement Save Settings Display menu Picture menu Function Description TeachingSystem Setup Basic menu Function Description Quick Auto TimerSettings SearchSettings Security Description Panel KeyBackground LockSystem Setup Advanced menu Function Description Reset AllBaud Rate Test PatternFeatures Service CurrentSystem StatusMaintenance Care of the projectorSetting Lamp Mode as Economic Setting Auto Power OffLamp information Getting to know the lamp hourTiming of replacing the lamp Status MessageReplacing the lamp Tighten the screw that secures the lamp Connect the power and restart the projector Resetting the lamp timerTighten the screw that secures the lamp cover Indicators Light Status & Description Power eventsLamp events Thermal eventsTroubleshooting Specifications Projector specificationsDimensions Mm W x 128 mm H x 252 mm DCeiling Mount screw M4 x 8 Max L = 8 mm Unit mmTiming chart Supported timing for PC inputSupported timing for Hdmi Hdcp input Supported timing for Component-YPbPrinput Supported timing for Video and S-Video inputsTiming HorizontalWarranty and Copyright information Limited warrantyCopyright DisclaimerRegulation statements FCC statement for United States usersEEC statement for European users Weee directive
Top Page Image Contents