Barco R9001490 owner manual Switching on, Lamp Run Time Warning

Page 44

Getting Started

Operating the Projector

Switching on

Use the power switch to switch on.

When '0' is visible, the projector is switched off. When '1' is visible, the projector is switched on.

When switching on with the power switch, the projector starts in the stand by mode. The projector mode indication lamp is red.

To start image projection :

a. press the 'Stand by' button A on the local keypad or on the remote control. The projector mode indication lamp will be green.

b. press a digit button to select an input source. The projector mode indication lamp will be green.

STANDBY

EXIT

ENTER

TEXT		PAUSE
SHARPN	TINT	BRIGHTN
PHASE	COLOR

		-	+
	?
9	0	-	+
9	0
7	8	-
7	8
5	6	-	+
5	6
3	4	-	+
3	4
1	2	-	+
1	2

32a

Lamp Run Time Indication

When starting up and the total run time of the lamp is 470 hours or more, the lamp remaining run time will be displayed for 1 minute. This warning message will be repeated every 30 minutes. Press EXIT to remove the message before the minute is over.

REMAINING LAMP RUN TIME 30 h

When the total run time of the lamp is 500 hours or more, the following warning message, with the exact run time is displayed on the screen.

Lamp run time is 500 hours. Operating the lamp longer than 500 hours may damage the projector. Please replace the lamp.

WARNING

Lamp run time is 500 hours Operating the lamp longer than 500 hours may damage the projector.

Please replace the lamp

<ENTER> to continue

When OK (ENTER) is pressed to go on, the warning will be repeated every 30 min.

The total lifetime of the lamp for a safe operation is 500 hours max. Do not use it longer. Always replace with a same type of lamp. Call a BARCO authorized service technician for lamp replacement.

Lamp Run Time Warning

Using a lamp for more than 500 hours is dangerous as the lamp could explode.

5976072 BARCOELM R12 17012000		5-3

Image 44

Contents Barco Projection Systems Barco n.v./Projection Systems Table of Contents Connections Start UP of the Adjustment Mode Installation Mode 10-1 Table of Contents Safety To prevent battery explosionTo prevent personel injury To prevent projector damageSafety Packaging and Dimensions Dimensions Front ViewSide View Packaging and Dimensions Installation Guidelines Installation GuidelinesWhat image size? How big should the image be? Table/Top side facing ceiling Safety Area around the Projector Installing the projection lamp When transporting the projector Which Lens has to be selected Installing the Projection Lens 310a.DRW Stacking two Projectors Optional Profile Sections AC Power mains cord connection Switching onConnections FusesSwitching to Stand-by Switching OffConnections Lamp Run Time Indication Lamp Runtime WarningInput facilities Input facilities, RCVDS05 or VS05 connectedConnections Input module insertion into the projector How to select input Slot How to change the input slot settingConnections Fixed RGB analog input slot Range of interfaces made by BarcoWhich signals can be connected to slot 2 ? Fixed 5-Input Slot slotWhat can be connected to the S-Video input ? How to selectWhat can be connected to the Video input ? Connections How to set the input priority ? Straps on module levelHow to select the RGB input What can be connected to these inputs ?Remark Sync selection on the Input Slots menuRGB-SOG How to select the Component Video input Indication on the input slot menu16HSDRUP How to select the RGB3S input Floating OrdwlqjruqrqiordwlqjlqsxwConnections How to select the Digital inputWhat can be connected to this input ? Connections How to select the Digital input Connections Connecting a VS05 to the projector Connecting an IR Remote Receiver to the projectorGetting Started Getting StartedGetting Started Terminology RCULamp Run Time Warning Service Getting Started Lamp Light Output IndicationQuick Language Change Change LanguageGetting Started Quick Lens Adjustment Lens Adjustment ZOOM/FOCUSLens Adjustment Shift TiltGetting Started Quick On Screen Color change Pointing to the reflective screenOSD Color OSD Color Highlighted ItemGetting Started Hardwired Remote Input Hardwired to the XLR InputWhy a projector address ? Set up an Individual Projector AddressHow to control the projector or projectors ? Before using the RCUHow to Program an Address into the RCU ? Getting Started Display the Projector Address on the ScreenInput Selection Picture ContolsPause key Stand-by keyStart up of the Adjustment Mode PasswordProtectionEntering the Password Start upSetting Up the personalised Passwords Menus on Local LCD DisplayStarting up Random Access Adjustment ModeOverview Flowchart Connecting a new Source Start up the File ServicePossible File Manipulations File AnnotationHow to load a file ? Start up the Load FileImage is not perfect ? Load FileHow to start up the Edit menu ? Which items can be adjusted ?How to change the settings ? What can be done with the Edit File menu ?Read Amds Edit File OptionsConfirm Edit File Rename FileRandom Access Adjustment Mode How to change the characters ? Copy FileFile Sort File LoadDelete File Confirm Delete FileWhat is CTI ? How to change the CTI setting ?Picture Tuning CTI onAvailable color temperature Adjusting the Color TemperatureWhat can be adjusted ? Custom BalanceWhat can be done ? How can it be selected ?Purpose To change the dynamic color depth valueWhy adjusting the input balance ? How to adjust the input balance ?To change the noise reduction value Noise ReductionWhich geometry adjustments are possible ? How can an adjustment be adjusted ?To start up the Geometry functions To start up the shift actionTo start up the size adjustment Aligning the keystoneBlanking Available Blanking AdjustmentAdjusting the blanking Setting Up the Aspect Ratio What can be done?Which Options are available within the Geometry menu ? Changing the Geometry OptionsPossible results for the input slots Installation ModeTo view or to change the input configuration What if a switcher is connected to the projector ? What can be installed ?Peripheral Configuration Defining the Output module of the RCVDS05Set up the Correct Configuration How to change this color setting ?Configuration What will happenInstallation Mode Changing the Background Color Changing the Shutdown SettingNo Signal No SignalHow to select an internal pattern ? What can be done with these internal patterns ?Internal Patterns LensInstallation Mode Zoom/Focus/Shift/Tilt How to Zoom/Focus ?How to shift the image ? How to tilt the image ?Installation Mode Bridge up or down How to get an overview ?Quick Access Keys OptionsHow to set up? Service Mode Built-up of the service modeDetailed description How to display the Identification screen ?Information How to enable or disable the password function ? About password TypesService Mode How to change the password ? Access Control ListAccess Control List Access Control ListHow to change that address ? Entering the new projector addressStart Up the Serial Communication menu Serial CommunicationService Mode Setting up the Baud rate Installing the Interface StandardAvailable Baud rates RS422 TerminationLamp information light output switching How to display the lamp menuHow to switch the constant light output ? How to add or the change the settings ?Service Mode Available settings How to start up ?How to get add ins ? Reset Input BalanceService Mode How to activate an add-in ? How to start the I2C diagnosis ?What can be seen ? ADD-INSService Mode Confirm Quick Access Programmable Function Keys10-2 Barco ELM R12 Standard Source SET UP Files Appendix a Standard Source Set Up FilesSUNEWS67 Index IndexRCU