Barco R9001490 owner manual Start up of the Adjustment Mode, PossiblePaths, PasswordProtection

Page 52

Start up of the Adjustment Mode

6 START UP OF THE ADJUSTMENT MODE

Adjustment Mode

Start up

All source parameters, picture tuning and geometry are made while in the 'Adjustment Mode'. Press the ADJUST or ENTER key to enter the 'Adjustment mode'.

You are now in the 'Adjustment Mode'.

1The cursor key (RCU) or '+ or '-' keys (local keypad) are used to make menu selections and also for adjustments.

2 The ENTER and EXIT keys are used to move forward and backward through the menu structure.

3 The ADJUST key can be used to terminate the adjustment mode while any path selection menu is displayed.

ADJUSTMENT MODE

Select a path from below :

RANDOM ACCESS

INSTALLATION

SERVICE

Source 01 Select with  or  then <ENTER> <EXIT> to return.

PossiblePaths

There are 3 possible paths to follow once in the Adjustment Mode. They are :

Installation - Installation should be selected if a new input module is installed or a new source is connected to an existing input module. Also when the projector is relocated in a new configuration.

Random Access - Random Access should be selected to set up a new source.

Service - Service should be selected if the user intends to change general settings such as password, language, address, etc.or some service actions as reset lamp run time, panel adjustments, etc. or get set-up information.

PasswordProtection

A 3 level password protection is built in. Different passwords for the owner, user and guest are possible.

The accessibility of the items for the 3 different password levels can be set up in the 'Change Password' item in chapter 'Service'. While selecting a password protected item, the projector will ask to enter your password (Password protection is only available when the password strap on the controller module is ON, see 'Change password' in chapter 10 : 'Service mode'). While entering your password and you have access rights for that item (which will be checked by entering your password), the selected item will be displayed on the screen.

PASSWORD

ENTER PASSWORD

----

Use numeric keys

<EXIT> to return

Entering the Password

Your password contains 4 digits.

Enter the digits with the numeric keys.

Example : 2 3 1 9

The first digit position is highlighted. Enter with the numeric keys. The highlighted square jumps to the next position. Continue until all 4 digits are filled in.

5976072 BARCOELM R12 17012000		6-1

Image 52

Contents Barco Projection Systems Barco n.v./Projection Systems Table of Contents Connections Start UP of the Adjustment Mode Installation Mode 10-1 Table of Contents Safety To prevent battery explosionTo prevent personel injury To prevent projector damageSafety Packaging and Dimensions Dimensions Front ViewSide View Packaging and Dimensions Installation Guidelines Installation GuidelinesWhat image size? How big should the image be? Table/Top side facing ceiling Safety Area around the Projector Installing the projection lamp When transporting the projector Which Lens has to be selected Installing the Projection Lens 310a.DRW Stacking two Projectors Optional Profile Sections AC Power mains cord connection Switching onConnections FusesSwitching to Stand-by Switching OffConnections Lamp Run Time Indication Lamp Runtime WarningInput facilities Input facilities, RCVDS05 or VS05 connectedConnections Input module insertion into the projector How to select input Slot How to change the input slot settingConnections Fixed RGB analog input slot Range of interfaces made by BarcoWhich signals can be connected to slot 2 ? Fixed 5-Input Slot slotWhat can be connected to the Video input ? How to selectWhat can be connected to the S-Video input ? Connections How to set the input priority ? Straps on module levelHow to select the RGB input What can be connected to these inputs ?Remark Sync selection on the Input Slots menuRGB-SOG How to select the Component Video input Indication on the input slot menu16HSDRUP How to select the RGB3S input Floating OrdwlqjruqrqiordwlqjlqsxwWhat can be connected to this input ? How to select the Digital inputConnections Connections How to select the Digital input Connections Connecting a VS05 to the projector Connecting an IR Remote Receiver to the projectorGetting Started Getting StartedGetting Started Terminology RCULamp Run Time Warning Service Getting Started Lamp Light Output IndicationQuick Language Change Change LanguageGetting Started Quick Lens Adjustment Lens Adjustment ZOOM/FOCUSLens Adjustment Shift TiltGetting Started Quick On Screen Color change Pointing to the reflective screenOSD Color OSD Color Highlighted ItemGetting Started Hardwired Remote Input Hardwired to the XLR InputWhy a projector address ? Set up an Individual Projector AddressHow to control the projector or projectors ? Before using the RCUHow to Program an Address into the RCU ? Getting Started Display the Projector Address on the ScreenInput Selection Picture ContolsPause key Stand-by keyStart up of the Adjustment Mode PasswordProtectionEntering the Password Start upSetting Up the personalised Passwords Menus on Local LCD DisplayOverview Flowchart Random Access Adjustment ModeStarting up Connecting a new Source Start up the File ServicePossible File Manipulations File AnnotationHow to load a file ? Start up the Load FileImage is not perfect ? Load FileHow to start up the Edit menu ? Which items can be adjusted ?How to change the settings ? What can be done with the Edit File menu ?Read Amds Edit File OptionsConfirm Edit File Rename FileRandom Access Adjustment Mode How to change the characters ? Copy FileFile Sort File LoadDelete File Confirm Delete FileWhat is CTI ? How to change the CTI setting ?Picture Tuning CTI onAvailable color temperature Adjusting the Color TemperatureWhat can be adjusted ? Custom BalanceWhat can be done ? How can it be selected ?Purpose To change the dynamic color depth valueWhy adjusting the input balance ? How to adjust the input balance ?To change the noise reduction value Noise ReductionWhich geometry adjustments are possible ? How can an adjustment be adjusted ?To start up the Geometry functions To start up the shift actionTo start up the size adjustment Aligning the keystoneAdjusting the blanking Available Blanking AdjustmentBlanking Setting Up the Aspect Ratio What can be done?Which Options are available within the Geometry menu ? Changing the Geometry OptionsTo view or to change the input configuration Installation ModePossible results for the input slots What if a switcher is connected to the projector ? What can be installed ?Peripheral Configuration Defining the Output module of the RCVDS05Set up the Correct Configuration How to change this color setting ?Configuration What will happenInstallation Mode Changing the Background Color Changing the Shutdown SettingNo Signal No SignalHow to select an internal pattern ? What can be done with these internal patterns ?Internal Patterns LensInstallation Mode Zoom/Focus/Shift/Tilt How to Zoom/Focus ?How to shift the image ? How to tilt the image ?Installation Mode Bridge up or down How to get an overview ?Quick Access Keys OptionsHow to set up? Service Mode Built-up of the service modeInformation How to display the Identification screen ?Detailed description How to enable or disable the password function ? About password TypesService Mode How to change the password ? Access Control ListAccess Control List Access Control ListHow to change that address ? Entering the new projector addressStart Up the Serial Communication menu Serial CommunicationService Mode Setting up the Baud rate Installing the Interface StandardAvailable Baud rates RS422 TerminationLamp information light output switching How to display the lamp menuHow to switch the constant light output ? How to add or the change the settings ?Service Mode Available settings How to start up ?How to get add ins ? Reset Input BalanceService Mode How to activate an add-in ? How to start the I2C diagnosis ?What can be seen ? ADD-INSService Mode Confirm Quick Access Programmable Function Keys10-2 Barco ELM R12 Standard Source SET UP Files Appendix a Standard Source Set Up FilesSUNEWS67 Index IndexRCU