Random Access Adjustment Mode
Picture Service
Connecting a new Source.
Before using a new source, a correct file has to be installed. The projector's memory contains a list of files corresponding to the most used sources. When the new source corresponds with one of these files, the file can be loaded and saved for future use. When there is a little difference, the file can also be loaded and then edited until the source specs are reached.
So,
1Load a file out of the list.
2 Edit this file if necessary.
3 If the projected image is not as desired, continue with Picture Tuning and Geometry.
Start up the File Service.
1Push the cursor key or to highlight 'File Service' (menu 1).
2 Press ENTER to select.
The File service menu will be displayed (menu 2).
Note : EXIT returns to the Path selection menu.
ADJUST returns to operational mode.
RANDOM ACCESS
ADJUSTMENT MODE
FILE SERVICE
PICTURE TUNING
GEOMETRY
Select with or
then <ENTER>
<EXIT> to return.
menu1
FILE SERVICE
LOAD
EDIT
RENAME
COPY
DELETE
OPTIONS
Select with or
then <ENTER> <EXIT> to return.
menu2
Possible File Manipulations.
The following file manipulations are possible :
-Load : installation of a file for a new source.
-Edit : editing a loaded file to the source specs.
-Rename : renaming a file.
-Copy : copying a file to a new file.
-Delete : deleting an existing file.
-Options : way of sorting the files & automatic file loading.
File Annotation.
xxxxxxxx.xxx x xxxxXxxxxi
i or blank : i = interlaced, blank = not interlaced
xxxxXxxxx : active pixel rating
x : source number
xxx: file extension, first character is C (for custom made files) or S (for standard files).
The second and third character is used for a following number (=file index)
file index for custom files : 00 to 63.
xxxxxxxx : base name, 8 characters.
| 5976072 BARCOELM R12 17012000 | |
|