Random Access Adjustment Mode
Size
What can be done ?
The size can be adjusted in a vertical or horizontal way. When adjusting the vertical size,
The upper side of the image is fixed (table and ceiling mounted configurations) and only the lower side can be moved to its exact position.
When adjusting the horizontal size, the left side of the image is fixed and only the right side can be moved to its exact position.
To start up the size adjustment :
1Push the cursor key or to highlight 'Size' (menu 1).
2 Press ENTER to select.
3 Push the cursor key or to size the image in a vertical direction. Push the cursor key or to size the image in a horizontal direction.
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
ASPEC RATIO [4:3]
OPTIONS
Select with | or |
then <ENTER> | |
<EXIT> to | return. |
menu1
Fixed sides
Horizontal size |
adjustment |
Vertical size adjustment
Example for table mount configuration
Side Keystone
What can be done ?
The side keystone adjustment is used to align the image if the projector is mounted at a nonstandard projection angle.
Aligning the keystone
1Push the cursor key or to highlight 'Side Keystone'.
2 Press ENTER to select.
3 Push the cursor key or to adjust the keystone of the image.
When the upper part of the image is wider than the lower part of the image, push the cursor key . The number indication below the bar scale will be negative.
When the upper part of the image is smaller than the lower part of the image, push the cursor key . The number indication below the bar scale will be positive.
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
ASPEC RATIO [4:3]
OPTIONS
Select with 
or 
then <ENTER> <EXIT> to return.
menu1
| 5976072 BARCOELM R12 17012000 | |
|