3M 9000PD manual Shutdown

Page 21

3M™ Digital WallDisplay	Operation

Shutdown

1.Press the On/Off Button on the bottom center panel of the 3M Digital WallDisplay unit.

2.The lamp will turn off and the projector arm will return to its housing. The On/Off Button will flash red as the arm closes.

Note:	There is a 30-second reset period before the On/Off Button will function again. During this
	period, the On/Off Button will flash red.

The fan will continue to run for approximately five minutes to cool the unit.

Note: If the 3M Digital WallDisplay will not be moved or disconnected, leave the Master Power Switch on for your convenience.

Do not turn off the Master Power Switch or unplug the power cord before pressing the On/Off Button. After the On/Off Button is pressed, the fan continues for approximately five minutes to cool the 3M Digital WallDisplay.

© 3M 2005. All Rights Reserved.

21

Image 21

Contents Operator’s Guide This page intentionally left blank for printed version Contents Troubleshooting MaintenanceService Information Menu SystemIntroduction Safety InformationThank You for Choosing 3M Intended UseTo reduce the risk associated with hazardous voltage Introduction 3M Digital WallDisplayTo reduce the risk associated with muscle strain and impact To reduce the risk associated with chokingTo reduce the risk associated with tripping over cables To reduce the risk associated with radio interferenceImportant Notes Trademarks Product Safety Label3M Digital WallDisplay Technical Support PatentsFCC Statement-Class a EEC Statement-Class aModel Identification and Differences Identify ModelModel Differences Contents Optional AccessoriesWhat’s Next? Part Identification 3M Digital WallDisplay Features Recommendation and Things to Consider Before Installing Installation and System SetupLocation of Unit Air VentilationInstallation and System Setup 3M Digital WallDisplay Installing the Wall BracketInstallation for a Hollow Wall-Drywall Unpacking Wall Bracket and HardwareUnpacking the 3M Digital WallDisplay Hanging the 3M Digital WallDisplay3M 2005. All Rights Reserved System Setup Operation StartupOperation 3M Digital WallDisplay Shutdown Remote Control Unit FeaturesRemote Control Unit 3M Digital WallDisplay Forward Keypad Rear Keypad Installing or Replacing Batteries Menu Navigation Menu SystemColorful-Bright Slider Menu System 3M Digital WallDisplayWarm-Cool Slider Volume SliderMute Menu Function Input Select Menu Reset All MenuImage Adj Sub-Menu BandingMain Returns to main menu Exit Leaves the menu system Tools Sub-Menu General Maintenance MaintenanceLamp Usage Onscreen Lamp MessagesLamp Replacement 5a 5b 3M Digital WallDisplay Resetting Lamp Hours Replacing ProjectionScreen Optical Engine Adjustment 3M Digital WallDisplay Replace the optical adjustment door Common Problems and Solutions TroubleshootingMessage Meaning Onscreen MessagesService Information Replacement PartsOrdering Parts or Getting Information 3M Digital WallDisplay Specifications AppendixAppendix Computer Compatibility Input/Output Signal Specifications3M Austin Center 3M Canada 3M Mexico, S.A. de C.V 3M Europe