3M 9000PD Image Adj Sub-Menu, Banding, Main Returns to main menu Exit Leaves the menu system

Page 30

Menu System	3M™ Digital WallDisplay

Image Adj Sub-Menu

The Image Adjustment sub-menu adjusts the projected image settings for the VGA and DVI-D inputs. Use the Vertical Position and Horizontal Position sliders to reposition an image if portions are not visible. Use the Phase and Sync sliders to eliminate vertical banding and noise.

Vertical Position	Adjusts the vertical position of the projected image.
Horizontal Position	Adjusts the horizontal position of the projected image.
Phase	Adjusts the pixel sampling. Use this to reduce image noise and flicker.
Sync	Adjusts the expected pixel number in a single video line. Use this to eliminate
	banding.
Main	Returns to main menu.
Exit	Leaves the menu system.

To open the Image Adj submenu:

1.Open the menu system by pressing the remote control Menu button or any arrow on the Menu Keypad.

2.Select the Image Adj sub-menu by pressing the up or down arrows on the remote control Disk Pad or Menu Keypad.

3.To open the Image Adj sub-menu, press the right arrow of the Disk Pad or Menu Keypad.

4.Scroll to the desired slider and move it to the right or left as needed.

5.Close the menu system by pressing the Menu button or scrolling to Exit and selecting it with the left or right arrow of the Menu Keypad.

To return to the main menu, select Main and press the left or right arrow of the Disk Pad or Menu Keypad.

30	© 3M 2005. All Rights Reserved.

Image 30

Contents Operator’s Guide This page intentionally left blank for printed version Contents Service Information MaintenanceTroubleshooting Menu SystemThank You for Choosing 3M Safety InformationIntroduction Intended UseTo reduce the risk associated with muscle strain and impact Introduction 3M Digital WallDisplayTo reduce the risk associated with hazardous voltage To reduce the risk associated with chokingTo reduce the risk associated with radio interference To reduce the risk associated with tripping over cablesImportant Notes Product Safety Label TrademarksFCC Statement-Class a Patents3M Digital WallDisplay Technical Support EEC Statement-Class aModel Identification and Differences Identify ModelModel Differences Contents Optional AccessoriesWhat’s Next? Part Identification 3M Digital WallDisplay Features Location of Unit Installation and System SetupRecommendation and Things to Consider Before Installing Air VentilationInstallation for a Hollow Wall-Drywall Installing the Wall BracketInstallation and System Setup 3M Digital WallDisplay Unpacking Wall Bracket and HardwareHanging the 3M Digital WallDisplay Unpacking the 3M Digital WallDisplay3M 2005. All Rights Reserved System Setup Operation StartupOperation 3M Digital WallDisplay Shutdown Remote Control Unit FeaturesRemote Control Unit 3M Digital WallDisplay Forward Keypad Rear Keypad Installing or Replacing Batteries Colorful-Bright Slider Menu SystemMenu Navigation Menu System 3M Digital WallDisplayVolume Slider Warm-Cool SliderMute Menu Function Reset All Menu Input Select MenuImage Adj Sub-Menu BandingMain Returns to main menu Exit Leaves the menu system Tools Sub-Menu Lamp Usage MaintenanceGeneral Maintenance Onscreen Lamp MessagesLamp Replacement 5a 5b 3M Digital WallDisplay Resetting Lamp Hours Replacing ProjectionScreen Optical Engine Adjustment 3M Digital WallDisplay Replace the optical adjustment door Troubleshooting Common Problems and SolutionsOnscreen Messages Message MeaningService Information Replacement PartsOrdering Parts or Getting Information 3M Digital WallDisplay Specifications AppendixAppendix Input/Output Signal Specifications Computer Compatibility3M Austin Center 3M Canada 3M Mexico, S.A. de C.V 3M Europe