Onkyo HT-RC360 instruction manual Network, Firmware Update, Dhcp

Page 54

Network

After modifying the network settings, you must confirm the changes by executing “Save”.

This section explains how to configure the AV receiver’s network settings manually.

If your router’s DHCP server is enabled, you don’t need to change any of these settings, as the AV receiver is set to use DHCP to configure itself automatically by default (i.e., DHCP is set to “Enable”). If, however, your router’s DHCP server is disabled (you’re for example using static IP), you’ll need to configure these settings yourself, in which case, a knowledge of Ethernet networking is essential.

What’s DHCP?

DHCP (Dynamic Host Configuration Protocol) is used by routers, computers, the AV receiver, and other devices to automatically configure themselves on a network.

What’s DNS?

The DNS (Domain Name System) translates domain names into IP addresses. For example, when you enter a domain name such as www.onkyousa.com in your Web browser, before accessing the site, your browser uses DNS to translate this into an IP address, in this case 63.148.251.142.

■MAC Address

This is the AV receiver’s MAC (Media Access Control) address. This address cannot be changed.

■DHCP

`Enable

`Disable

This setting determines whether or not the AV receiver uses DHCP to automatically configure its IP Address, Subnet Mask, Gateway, and DNS Server settings.

Note

•If you select “Disable”, you must configure the “IP Address”, “Subnet Mask”, “Gateway”, and “DNS Server” settings yourself.

■IP Address

`Class A:

“10.0.0.0” to “10.255.255.255”

`Class B:

“172.16.0.0” to “172.31.255.255”

`Class C:

“192.168.0.0” to “192.168.255.255” Enter a static IP address provided by your ISP. Most routers use Class C IP addresses.

■Subnet Mask

Enter the subnet mask address provided by your ISP (typically 255.255.255.0).

■Gateway

Enter the gateway address provided by your ISP.

■DNS Server

Enter the DNS server address provided by your ISP.

En

■Proxy URL

To use a Web proxy, enter its URL here.

■Proxy Port

If you’re using a Web proxy, enter a proxy port number here.

■Network Control

`Enable

`Disable

This setting enables or disables control over the network.

Note

•When set to “Enable”, the NET indicator is dimly-lit and the power consumption slightly increases in standby mode.

■Control Port

`“49152” to “65535”

This is the network port used for control over the network.

Note

•When the “Network Control” setting is set to “Disable”, this setting is cannot be selected.

Firmware Update

See “Firmware Update” for the update procedure

(➔ page 74).

Note

•Perform the firmware update only when such an announcement is posted on the Onkyo web site. Visit the Onkyo web site for the latest information.

•It takes maximum 60 minutes to complete the firmware update.

■Version

Displays the current version of the firmware.

■Receiver

`via NET:

Performs the firmware update via Internet. Check the network connection before updating.

`via USB:

Performs the firmware update from a USB device. These settings allow you to update the AV receiver’s firmware. Do not shutdown the power of the AV receiver while updating.

■Universal Port

`via NET:

Performs the firmware update via Internet. Check the network connection before updating.

`via USB:

Performs the firmware update from a USB device. These settings allow you to update Onkyo dock’s firmware. Do not shutdown the power of the AV receiver while updating.

Note

•This update shall not be performed when no dock is connected to the UNIVERSAL PORT jack.

54

Page 53 Page 55
Image 54
Page 53 Page 55
Contents HT-RC360 Board above the apparatus shall be set 10 cm Local regulations when disposing of batteries10 cm 4 at the rear. The rear edge of the shelf or Away from the rear panel or wall, creating a flue-likePrecautions Installing the batteries Supplied AccessoriesMake sure you have the following accessories Aiming the remote controllerContents Amplifier FeaturesServices available may vary depending on the region ProcessingPage Front & Rear Panels Front PanelDisplay For detailed information, see the pages in parenthesesSee Connecting the AV Receiver for connection pages 12 to Power cordUREMOTE Control jack Rear PanelRemote Controller Controlling the AV ReceiverConnecting the AV Receiver Connecting Your SpeakersConnecting the Speaker Cables Speaker Configuration Speaker Connection PrecautionsAttaching the Speaker Cable Labels Using a Powered Subwoofer Bi-amping the Front SpeakersAV Cables and Jacks Connecting AV componentsAbout AV Connections Hdmi cableConnecting Components with Hdmi Audio Return Channel ARC functionJack Components Assignable Connecting Your Components How to record a video sourceJack/Port Components Assignable System On/Auto Power On Connecting Onkyo uComponentsConnecting a Recording Component Remote ControlBe careful not to injure yourself when using thumbtacks Connecting the AntennasConnecting the Power Cord Plug the power cord into an AC wall outletTurning Off Turning On/Off the AV ReceiverTurning On AV receiver comes on, the display lightsPlayback Controlling Contents of USB or Network DevicesSelecting the Language for the Onscreen Setup Menus Playing the Connected ComponentUnderstanding Icons on the Display Playing an iPod/iPhone via USBEnter Playing a USB Device Listening to Internet RadioListening to Other Internet Radio Registering My Favorites*1Top menu of Internet Radio Playing Music Files on a Server Windows Media Player 11 SetupWindows Media Player 12 Setup Remote PlaybackTuning into Radio Stations Using Remote PlaybackUsing the Tuner Listening to AM/FM RadioPresetting AM/FM Stations Using RDS Chinese modelsMode Displaying Radio Text RT Finding Stations by Type PTYListening to Traffic News TP Using Basic Functions Using the Automatic Speaker SetupMeasurement procedure ` Cancel When you’ve finished making the settings, pressWhen prompted, repeat step Use q/wto select a target, and use e/rto change the settingError Messages Changing the Speaker Setup ManuallyUsing the Listening Modes Selecting Listening ModesExplanatory Notes Following audio formats are supported by the listening modeAbout Listening Modes Input SourceOnkyo-Original DSP Listening Modes Listening ModesDolby Pro Logic IIz Resolution AudioDolby Pro Logic HeightListening Mode Description Input Speaker Source Layout Neo6 Audyssey DSX *8Using the Home Menu Using the Sleep TimerSetting the Display Brightness Changing the Input Display Using the Music OptimizerDisplaying Source Information VCR/DVRRecording Using HeadphonesMuting the AV Receiver AV RecordingCommon Procedures in Setup Menu Advanced SetupOn-screen Setup Menus Explanatory NotesMonitor Out ResolutionInput/Output Assign Hdmi InputComponent Video Input Speaker SetupSpeaker Settings Digital Audio InputSpeakers Type Front Powered ZoneSpeaker Impedance Chinese models FrontDouble Bass Speaker DistanceLevel Calibration UnitAudio Adjust Multiplex/MonoDolby Audyssey DSX Source SetupTheater-Dimensional AudysseyDynamic Volume Reference LevelIntelliVolume SyncName Edit Picture Adjust Charge Mode Audio SelectorMiscellaneous Listening Mode PresetVolume Setup DTS/DTS-ES/DTS-HDHardware Setup OSD Setup TunerRemote ID Auto Standby Firmware Update NetworkDhcp Remote Controller Setup Lock SetupUsing the Audio Settings Late Night Late Night CinemaFILTERMusic Optimizer Music OptimizerZone Connecting Your Zone 2 Speakers Directly to the AV receiverConnecting the Zone Speakers to an Additional Amplifier Making Zone 2 ConnectionsControlling Zone 2 Components Adjusting the Volume for ZoneOperating on the remote controller Muting ZoneUsing the Onkyo Dock IPod/iPhone Playback via Onkyo DockUP-A1 Dock With the RI Control Controlling Your iPod/iPhoneRI Dock Without the RI ControlAvailable buttons Entering Remote Control Codes Preprogrammed Remote Control CodesLooking up for Remote Control Code Controlling Other ComponentsResetting the Remote Controller Remote Control Codes for Onkyo Components Connected via uResetting Remote Mode Buttons Controlling Other ComponentsGuide SetupButtons Input TV VOL q / w SearchTroubleshooting PowerAudio Video Remote Controller TunerUP-A1 Dock for iPod/iPhone Music Server and Internet Radio RecordingZone USB Device PlaybackOthers Important Note Regarding Video Playback Component Video OUTNetwork/USB Features Connecting to the NetworkNetwork Requirements Server playback Server RequirementsUSB Device Requirements Remote playbackSupported Audio File Formats About DlnaUpdating the Firmware via Network Firmware UpdateUpdate procedure Before you startError Code Description TroubleshootingErrors during an update via network Updating the Firmware via USBErrors during an update via USB Connection Tips and Video Signal Path Signal SelectionVideo Connection Formats Audio Connection Formats OUTAbout Hdmi Supported Audio FormatsAbout Copyright Protection Using an RIHD-compatible TV, Player, or Recorder About p-compatible componentsOperations that can be performed with Connection Confirm the settings How to connect and setupConfirm the connecting and setting Operate with the remote controllerVideo Section SpecificationsAmplifier Section General Tuner SectionOutput Video Resolution ChartAvailable resolutions 3840 ⋅ 2160 24/25/30 Hz 1080p 1080i 720p 480p/576p 480i/576i Component CompositeOnkyo Europe Electronics GmbH Onkyo Europe Electronics GmbH UK Branch

HT-RC360 specifications

The Onkyo HT-RC360 is a versatile home theater receiver that has garnered attention for its impressive features and solid performance. Designed to elevate the home entertainment experience, this receiver combines cutting-edge technology with user-friendly functionality.

One of the standout features of the HT-RC360 is its support for high-definition audio formats. It is equipped with Dolby TrueHD and DTS-HD Master Audio decoding, allowing users to enjoy lossless surround sound that delivers a cinema-like experience from the comfort of their own homes. This ensures that every detail of the audio is preserved, making movies, music, and video games come to life with clarity and depth.

The receiver boasts a robust 7.2 channel amplification system, delivering a total power output of 100 watts per channel. This powerful amplification allows the HT-RC360 to drive a variety of speaker configurations, making it suitable for different room sizes and acoustics. Furthermore, the inclusion of Audyssey MultEQ room correction technology allows users to optimize the sound experience based on their specific room conditions. This results in balanced sound that is tailored to the acoustic characteristics of the space.

Connectivity options are abundant with the HT-RC360. It features multiple HDMI inputs and outputs, supporting 3D video and 4K passthrough, which is essential for modern home theater setups. Users can easily connect various devices, including Blu-ray players, gaming consoles, and streaming devices, making it a central hub for all their entertainment needs. Additionally, the receiver comes with analog and digital audio inputs, allowing flexibility in connecting legacy devices.

Another noteworthy characteristic of the Onkyo HT-RC360 is its built-in compatibility with various streaming services. It supports technologies such as Spotify Connect, allowing users to stream their favorite music directly from their smartphones or tablets. This feature enhances the convenience for users who prefer to access music libraries online without the need for physical media.

Overall, the Onkyo HT-RC360 is a remarkable home theater receiver that combines high-quality audio performance with modern connectivity features. Its powerful amplification, advanced audio decoding, and versatile streaming capabilities make it an excellent choice for anyone looking to create an immersive home entertainment experience. With the HT-RC360, users can enjoy movies, music, and gaming like never before.
Top Page Image Contents