Onkyo HT-RC360 Muting the AV Receiver, Using Headphones, AV Recording, Phones jack

Page 39

Muting the AV Receiver

You can temporarily mute the output of the AV receiver.

1 Press RECEIVER followed by MUTING.

The output is muted and the MUTING indicator flashes on the display.

Tip

•To unmute, press MUTING again or adjust the volume.

•Muting is automatically cancelled when the AV receiver is set to standby.

Using Headphones

1 Connect a pair of stereo headphones with a standard plug (1/4 inch or 6.3 mm) to the

PHONES jack.

Note

•Always turn down the volume before connecting your headphones.

•While the headphones plug is inserted in the PHONES jack, the speakers are turned off. (The Powered Zone 2 speakers are not turned off.)

•When you connect a pair of headphones, the listening mode is set to Stereo, unless it’s already set to Stereo, Mono, Direct, or Pure Audio (Chinese models).

•If you connect an iPod or iPhone to the USB port on this device, no sound will be output from the headphones jack.

Recording

This section explains how to record the selected input source to a component with recording capability, and how to record audio and video from different sources.

AV Recording

Audio sources can be recorded to a recorder (e.g., cassette tape deck, CDR, MD recorder). Video sources can be recorded to a video recorder (e.g., VCR, DVD recorder).

1

2

3

Use the input selector buttons to select the source that you want to record.

You can watch the source while recording. The AV receiver’s MASTER VOLUME control has no effect on recording.

On your recorder, start recording.

On the source component, start playback.

If you select another input source during recording, that input source will be recorded.

En

39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents HT-RC360 Away from the rear panel or wall, creating a flue-like Local regulations when disposing of batteries10 cm 4 at the rear. The rear edge of the shelf or Board above the apparatus shall be set 10 cmPrecautions Aiming the remote controller Supplied AccessoriesMake sure you have the following accessories Installing the batteriesContents Processing FeaturesServices available may vary depending on the region AmplifierPage Front Panel Front & Rear PanelsFor detailed information, see the pages in parentheses DisplayRear Panel Power cordUREMOTE Control jack See Connecting the AV Receiver for connection pages 12 toControlling the AV Receiver Remote ControllerConnecting the AV Receiver Connecting Your SpeakersConnecting the Speaker Cables Speaker Configuration Speaker Connection PrecautionsAttaching the Speaker Cable Labels Bi-amping the Front Speakers Using a Powered SubwooferHdmi cable Connecting AV componentsAbout AV Connections AV Cables and JacksConnecting Components with Hdmi Audio Return Channel ARC functionJack Components Assignable Connecting Your Components How to record a video sourceJack/Port Components Assignable Remote Control Connecting Onkyo uComponentsConnecting a Recording Component System On/Auto Power OnPlug the power cord into an AC wall outlet Connecting the AntennasConnecting the Power Cord Be careful not to injure yourself when using thumbtacksAV receiver comes on, the display lights Turning On/Off the AV ReceiverTurning On Turning OffPlaying the Connected Component Controlling Contents of USB or Network DevicesSelecting the Language for the Onscreen Setup Menus PlaybackUnderstanding Icons on the Display Playing an iPod/iPhone via USBEnter Listening to Internet Radio Playing a USB DeviceListening to Other Internet Radio Registering My Favorites*1Top menu of Internet Radio Remote Playback Windows Media Player 11 SetupWindows Media Player 12 Setup Playing Music Files on a ServerListening to AM/FM Radio Using Remote PlaybackUsing the Tuner Tuning into Radio StationsPresetting AM/FM Stations Using RDS Chinese modelsMode Displaying Radio Text RT Finding Stations by Type PTYListening to Traffic News TP Using Basic Functions Using the Automatic Speaker SetupMeasurement procedure Use q/wto select a target, and use e/rto change the setting When you’ve finished making the settings, pressWhen prompted, repeat step ` CancelChanging the Speaker Setup Manually Error MessagesSelecting Listening Modes Using the Listening ModesInput Source Following audio formats are supported by the listening modeAbout Listening Modes Explanatory NotesListening Modes Onkyo-Original DSP Listening ModesHeight Resolution AudioDolby Pro Logic Dolby Pro Logic IIzAudyssey DSX *8 Listening Mode Description Input Speaker Source Layout Neo6Using the Home Menu Using the Sleep TimerSetting the Display Brightness VCR/DVR Using the Music OptimizerDisplaying Source Information Changing the Input DisplayAV Recording Using HeadphonesMuting the AV Receiver RecordingExplanatory Notes Advanced SetupOn-screen Setup Menus Common Procedures in Setup MenuHdmi Input ResolutionInput/Output Assign Monitor OutDigital Audio Input Speaker SetupSpeaker Settings Component Video InputFront Powered ZoneSpeaker Impedance Chinese models Speakers Type FrontUnit Speaker DistanceLevel Calibration Double BassAudio Adjust Multiplex/MonoDolby Audyssey Source SetupTheater-Dimensional Audyssey DSXReference Level Dynamic VolumeIntelliVolume SyncName Edit Picture Adjust Audio Selector Charge ModeDTS/DTS-ES/DTS-HD Listening Mode PresetVolume Setup MiscellaneousHardware Setup OSD Setup TunerRemote ID Auto Standby Firmware Update NetworkDhcp Remote Controller Setup Lock SetupUsing the Audio Settings Music Optimizer Late Night CinemaFILTERMusic Optimizer Late NightMaking Zone 2 Connections Connecting Your Zone 2 Speakers Directly to the AV receiverConnecting the Zone Speakers to an Additional Amplifier ZoneMuting Zone Adjusting the Volume for ZoneOperating on the remote controller Controlling Zone 2 ComponentsUsing the Onkyo Dock IPod/iPhone Playback via Onkyo DockUP-A1 Dock Without the RI Control Controlling Your iPod/iPhoneRI Dock With the RI ControlAvailable buttons Controlling Other Components Preprogrammed Remote Control CodesLooking up for Remote Control Code Entering Remote Control CodesControlling Other Components Remote Control Codes for Onkyo Components Connected via uResetting Remote Mode Buttons Resetting the Remote ControllerSearch SetupButtons Input TV VOL q / w GuideTroubleshooting PowerAudio Video Remote Controller TunerUP-A1 Dock for iPod/iPhone USB Device Playback RecordingZone Music Server and Internet RadioOthers Component Video OUT Important Note Regarding Video PlaybackNetwork/USB Features Connecting to the NetworkNetwork Requirements Remote playback Server RequirementsUSB Device Requirements Server playbackAbout Dlna Supported Audio File FormatsBefore you start Firmware UpdateUpdate procedure Updating the Firmware via NetworkUpdating the Firmware via USB TroubleshootingErrors during an update via network Error Code DescriptionErrors during an update via USB Connection Tips and Video Signal Path Signal SelectionVideo Connection Formats OUT Audio Connection FormatsAbout Hdmi Supported Audio FormatsAbout Copyright Protection Using an RIHD-compatible TV, Player, or Recorder About p-compatible componentsOperations that can be performed with Connection Operate with the remote controller How to connect and setupConfirm the connecting and setting Confirm the settingsTuner Section SpecificationsAmplifier Section General Video Section1080p 1080i 720p 480p/576p 480i/576i Component Composite Video Resolution ChartAvailable resolutions 3840 ⋅ 2160 24/25/30 Hz OutputOnkyo Europe Electronics GmbH UK Branch Onkyo Europe Electronics GmbH

HT-RC360 specifications

The Onkyo HT-RC360 is a versatile home theater receiver that has garnered attention for its impressive features and solid performance. Designed to elevate the home entertainment experience, this receiver combines cutting-edge technology with user-friendly functionality.

One of the standout features of the HT-RC360 is its support for high-definition audio formats. It is equipped with Dolby TrueHD and DTS-HD Master Audio decoding, allowing users to enjoy lossless surround sound that delivers a cinema-like experience from the comfort of their own homes. This ensures that every detail of the audio is preserved, making movies, music, and video games come to life with clarity and depth.

The receiver boasts a robust 7.2 channel amplification system, delivering a total power output of 100 watts per channel. This powerful amplification allows the HT-RC360 to drive a variety of speaker configurations, making it suitable for different room sizes and acoustics. Furthermore, the inclusion of Audyssey MultEQ room correction technology allows users to optimize the sound experience based on their specific room conditions. This results in balanced sound that is tailored to the acoustic characteristics of the space.

Connectivity options are abundant with the HT-RC360. It features multiple HDMI inputs and outputs, supporting 3D video and 4K passthrough, which is essential for modern home theater setups. Users can easily connect various devices, including Blu-ray players, gaming consoles, and streaming devices, making it a central hub for all their entertainment needs. Additionally, the receiver comes with analog and digital audio inputs, allowing flexibility in connecting legacy devices.

Another noteworthy characteristic of the Onkyo HT-RC360 is its built-in compatibility with various streaming services. It supports technologies such as Spotify Connect, allowing users to stream their favorite music directly from their smartphones or tablets. This feature enhances the convenience for users who prefer to access music libraries online without the need for physical media.

Overall, the Onkyo HT-RC360 is a remarkable home theater receiver that combines high-quality audio performance with modern connectivity features. Its powerful amplification, advanced audio decoding, and versatile streaming capabilities make it an excellent choice for anyone looking to create an immersive home entertainment experience. With the HT-RC360, users can enjoy movies, music, and gaming like never before.
Top Page Image Contents