Onkyo HT-RC360 Supplied Accessories, Make sure you have the following accessories

Page 4
Batteries (AA/R6)

Supplied Accessories

Make sure you have the following accessories:

Indoor FM antenna (➔ page 19)

AM loop antenna (➔ page 19)

Speaker cable labels (➔ page 13)

Speaker setup microphone (➔ page 29)

Remote controller (RC-801M) and two batteries (AA/R6)

(Note for China: The battery for the remote controller is not supplied for this unit.)

*In catalogs and on packaging, the letter at the end of the product name indicates the color. Specifications and operations are the same regardless of color.

■Installing the batteries

Note

• If the remote controller doesn’t work reliably, try replacing the batteries.

•Don’t mix new and old batteries or different

types of batteries.

•If you intend not to use

the remote controller for a long time, remove the batteries to prevent damage from leakage or corrosion.

•Remove expired batteries as soon as possible to prevent damage from leakage or corrosion.

■Aiming the remote controller

To use the remote controller, point it at the AV receiver’s remote control sensor, as shown below.

Remote control sensor

AV receiver

Approx. 16 ft. (5 m)

En

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents HT-RC360 Local regulations when disposing of batteries 10 cm 4 at the rear. The rear edge of the shelf orBoard above the apparatus shall be set 10 cm Away from the rear panel or wall, creating a flue-likePrecautions Supplied Accessories Make sure you have the following accessoriesInstalling the batteries Aiming the remote controllerContents Features Services available may vary depending on the regionAmplifier ProcessingPage Front & Rear Panels Front PanelDisplay For detailed information, see the pages in parenthesesPower cord UREMOTE Control jackSee Connecting the AV Receiver for connection pages 12 to Rear PanelRemote Controller Controlling the AV ReceiverConnecting Your Speakers Connecting the AV ReceiverConnecting the Speaker Cables Speaker Connection Precautions Speaker ConfigurationAttaching the Speaker Cable Labels Using a Powered Subwoofer Bi-amping the Front SpeakersConnecting AV components About AV ConnectionsAV Cables and Jacks Hdmi cableAudio Return Channel ARC function Connecting Components with HdmiJack Components Assignable How to record a video source Connecting Your ComponentsJack/Port Components Assignable Connecting Onkyo uComponents Connecting a Recording ComponentSystem On/Auto Power On Remote ControlConnecting the Antennas Connecting the Power CordBe careful not to injure yourself when using thumbtacks Plug the power cord into an AC wall outletTurning On/Off the AV Receiver Turning OnTurning Off AV receiver comes on, the display lightsControlling Contents of USB or Network Devices Selecting the Language for the Onscreen Setup MenusPlayback Playing the Connected ComponentPlaying an iPod/iPhone via USB Understanding Icons on the DisplayEnter Playing a USB Device Listening to Internet RadioRegistering My Favorites*1 Listening to Other Internet RadioTop menu of Internet Radio Windows Media Player 11 Setup Windows Media Player 12 SetupPlaying Music Files on a Server Remote PlaybackUsing Remote Playback Using the TunerTuning into Radio Stations Listening to AM/FM RadioUsing RDS Chinese models Presetting AM/FM StationsMode Finding Stations by Type PTY Displaying Radio Text RTListening to Traffic News TP Using the Automatic Speaker Setup Using Basic FunctionsMeasurement procedure When you’ve finished making the settings, press When prompted, repeat step` Cancel Use q/wto select a target, and use e/rto change the settingError Messages Changing the Speaker Setup ManuallyUsing the Listening Modes Selecting Listening ModesFollowing audio formats are supported by the listening mode About Listening ModesExplanatory Notes Input SourceOnkyo-Original DSP Listening Modes Listening ModesResolution Audio Dolby Pro LogicDolby Pro Logic IIz HeightListening Mode Description Input Speaker Source Layout Neo6 Audyssey DSX *8Using the Sleep Timer Using the Home MenuSetting the Display Brightness Using the Music Optimizer Displaying Source InformationChanging the Input Display VCR/DVRUsing Headphones Muting the AV ReceiverRecording AV RecordingAdvanced Setup On-screen Setup MenusCommon Procedures in Setup Menu Explanatory NotesResolution Input/Output AssignMonitor Out Hdmi InputSpeaker Setup Speaker SettingsComponent Video Input Digital Audio InputPowered Zone Speaker Impedance Chinese modelsSpeakers Type Front FrontSpeaker Distance Level CalibrationDouble Bass UnitMultiplex/Mono Audio AdjustDolby Source Setup Theater-DimensionalAudyssey DSX AudysseyDynamic Volume Reference LevelSync IntelliVolumeName Edit Picture Adjust Charge Mode Audio SelectorListening Mode Preset Volume SetupMiscellaneous DTS/DTS-ES/DTS-HDOSD Setup Tuner Hardware SetupRemote ID Auto Standby Network Firmware UpdateDhcp Lock Setup Remote Controller SetupUsing the Audio Settings Late Night CinemaFILTER Music OptimizerLate Night Music OptimizerConnecting Your Zone 2 Speakers Directly to the AV receiver Connecting the Zone Speakers to an Additional AmplifierZone Making Zone 2 ConnectionsAdjusting the Volume for Zone Operating on the remote controllerControlling Zone 2 Components Muting ZoneIPod/iPhone Playback via Onkyo Dock Using the Onkyo DockUP-A1 Dock Controlling Your iPod/iPhone RI DockWith the RI Control Without the RI ControlAvailable buttons Preprogrammed Remote Control Codes Looking up for Remote Control CodeEntering Remote Control Codes Controlling Other ComponentsRemote Control Codes for Onkyo Components Connected via u Resetting Remote Mode ButtonsResetting the Remote Controller Controlling Other ComponentsSetup Buttons Input TV VOL q / wGuide SearchPower TroubleshootingAudio Video Tuner Remote ControllerUP-A1 Dock for iPod/iPhone Recording ZoneMusic Server and Internet Radio USB Device PlaybackOthers Important Note Regarding Video Playback Component Video OUTConnecting to the Network Network/USB FeaturesNetwork Requirements Server Requirements USB Device RequirementsServer playback Remote playbackSupported Audio File Formats About DlnaFirmware Update Update procedureUpdating the Firmware via Network Before you startTroubleshooting Errors during an update via networkError Code Description Updating the Firmware via USBErrors during an update via USB Signal Selection Connection Tips and Video Signal PathVideo Connection Formats Audio Connection Formats OUTSupported Audio Formats About HdmiAbout Copyright Protection About p-compatible components Using an RIHD-compatible TV, Player, or RecorderOperations that can be performed with Connection How to connect and setup Confirm the connecting and settingConfirm the settings Operate with the remote controllerSpecifications Amplifier Section GeneralVideo Section Tuner SectionVideo Resolution Chart Available resolutions 3840 ⋅ 2160 24/25/30 HzOutput 1080p 1080i 720p 480p/576p 480i/576i Component CompositeOnkyo Europe Electronics GmbH Onkyo Europe Electronics GmbH UK Branch

HT-RC360 specifications

The Onkyo HT-RC360 is a versatile home theater receiver that has garnered attention for its impressive features and solid performance. Designed to elevate the home entertainment experience, this receiver combines cutting-edge technology with user-friendly functionality.

One of the standout features of the HT-RC360 is its support for high-definition audio formats. It is equipped with Dolby TrueHD and DTS-HD Master Audio decoding, allowing users to enjoy lossless surround sound that delivers a cinema-like experience from the comfort of their own homes. This ensures that every detail of the audio is preserved, making movies, music, and video games come to life with clarity and depth.

The receiver boasts a robust 7.2 channel amplification system, delivering a total power output of 100 watts per channel. This powerful amplification allows the HT-RC360 to drive a variety of speaker configurations, making it suitable for different room sizes and acoustics. Furthermore, the inclusion of Audyssey MultEQ room correction technology allows users to optimize the sound experience based on their specific room conditions. This results in balanced sound that is tailored to the acoustic characteristics of the space.

Connectivity options are abundant with the HT-RC360. It features multiple HDMI inputs and outputs, supporting 3D video and 4K passthrough, which is essential for modern home theater setups. Users can easily connect various devices, including Blu-ray players, gaming consoles, and streaming devices, making it a central hub for all their entertainment needs. Additionally, the receiver comes with analog and digital audio inputs, allowing flexibility in connecting legacy devices.

Another noteworthy characteristic of the Onkyo HT-RC360 is its built-in compatibility with various streaming services. It supports technologies such as Spotify Connect, allowing users to stream their favorite music directly from their smartphones or tablets. This feature enhances the convenience for users who prefer to access music libraries online without the need for physical media.

Overall, the Onkyo HT-RC360 is a remarkable home theater receiver that combines high-quality audio performance with modern connectivity features. Its powerful amplification, advanced audio decoding, and versatile streaming capabilities make it an excellent choice for anyone looking to create an immersive home entertainment experience. With the HT-RC360, users can enjoy movies, music, and gaming like never before.
Top Page Image Contents