Onkyo HT-RC360 Specifications, Amplifier Section General, Video Section, Tuner Section, Hdmi

Page 82

Specifications

Amplifier Section

 

General

Rated Output Power

All channels: (North American)

100 watts minimum continuous power per channel, 8 ohm loads, 2 channels driven from 20 Hz to 20 kHz, with a maximum total harmonic distortion of 0.08% (FTC)

130 watts minimum continuous power per channel, 6 ohm loads, 2 channels driven at 1 kHz, with a maximum total harmonic distortion of 1% (FTC)

(Chinese)

1 ch ⋅ 160 W at 6 ohms, 1 kHz, 1 ch driven of 1 % (IEC)

Maximum Effective Output Power

(Chinese)

1 ch ⋅ 175 W at 6 ohms, 1 kHz, 1 ch driven (JEITA)

Dynamic Power*

*IEC60268-Short-term maximum output power

240 W (3 Ω, Front)

210 W (4 Ω, Front)

120 W (8 Ω, Front)

THD+N (Total Harmonic Distortion+Noise)

0.08% (20 Hz - 20 kHz, half power)

Damping Factor 60 (Front, 1 kHz, 8 Ω)

Input Sensitivity and Impedance (Unbalance)

200 mV/47 kΩ (LINE)

Rated RCA Output Level and Impedance

200 mV/2.2 kΩ (REC OUT)

Maximum RCA Output Level and Impedance 2 V/2.2 kΩ (REC OUT)

Frequency Response 20 Hz - 50 kHz/+1 dB, -3 dB (DSP bypass)

Tone Control Characteristics

 

±10 dB, 50 Hz (BASS)

 

±10 dB, 20 kHz (TREBLE)

Signal to Noise Ratio

106 dB (LINE, IHF-A)

Speaker Impedance

(North American) 6 Ω - 16 Ω

 

(Chinese) 4 Ω - 16 Ω

Video Section

Input Sensitivity/Output Level and Impedance

1 Vp-p/75 Ω (Component Y)

0.7Vp-p/75 Ω (Component PB/CB, PR/CR) 1 Vp-p/75 Ω (Composite)

Component Video Frequency Response

5 Hz - 100 MHz/+0 dB, -3 dB

Tuner Section

FM Tuning Frequency Range

(North American)

87.5MHz - 107.9 MHz

(Chinese)

87.5MHz - 108.0 MHz, RDS

AM Tuning Frequency Range

 

522/530 kHz - 1611/1710 kHz

Preset Channel

40

En

82

Power Supply

(North American)

 

AC 120 V, 60 Hz

 

(Chinese)

 

AC 220 - 240 V, 50/60 Hz

Power Consumption

(North American)

 

6.2 A

 

(Chinese)

 

610 W

Stand-by Power Consumption

 

(North American)

 

0.2 W

 

(Chinese)

 

0.3 W

Dimensions

435 mm ⋅ 173.5 mm ⋅ 328 mm

(W ⋅ H ⋅ D)

17-1/8" ⋅ 6-13/16" ⋅ 12-15/16"

Weight

(North American)

 

10.9 kg (24 lbs.)

 

(Chinese)

 

11.1 kg (24.5 lbs.)

■ HDMI

 

Input

IN 1, IN 2, IN 3, IN 4, IN 5, AUX INPUT

Output

OUT

Video Resolution

1080p

Audio Format

Dolby TrueHD, DTS-HD Master Audio,

 

DVD-Audio, DSD

Supported

3D, Audio Return Channel, DeepColor,

 

x.v.Color, LipSync, CEC (RIHD)

■ Video Inputs

 

Component

IN 1, IN 2

Composite

BD/DVD, VCR/DVR, CBL/SAT, GAME,

 

USB

■ Video Outputs

 

Component

OUT

Composite

MONITOR OUT, VCR/DVR OUT

■ Audio Inputs

 

Digital

Optical: 2

 

Coaxial: 2

Analog

BD/DVD, VCR/DVR, CBL/SAT, GAME,

 

TV/CD

■ Audio Outputs

 

Analog

VCR/DVR, ZONE2 LINE OUT

Subwoofer Pre Outputs

 

 

2

Speaker Outputs

Main (L, R, C, SL, SR, SBL/FHL,

 

SBR/FHR) + ZONE2 (L, R)

Phones

1 (6.3 ø)

■ Others

 

Setup Mic

1

Universal Port

1

RI

1

USB

1 (Front)

Ethernet

1

Specifications and features are subject to change without notice.

Page 81 Page 83
Image 82
Page 81 Page 83
Contents HT-RC360 Board above the apparatus shall be set 10 cm Local regulations when disposing of batteries10 cm 4 at the rear. The rear edge of the shelf or Away from the rear panel or wall, creating a flue-likePrecautions Installing the batteries Supplied AccessoriesMake sure you have the following accessories Aiming the remote controllerContents Amplifier FeaturesServices available may vary depending on the region ProcessingPage Front & Rear Panels Front PanelDisplay For detailed information, see the pages in parenthesesSee Connecting the AV Receiver for connection pages 12 to Power cordUREMOTE Control jack Rear PanelRemote Controller Controlling the AV ReceiverConnecting Your Speakers Connecting the AV ReceiverConnecting the Speaker Cables Speaker Connection Precautions Speaker ConfigurationAttaching the Speaker Cable Labels Using a Powered Subwoofer Bi-amping the Front SpeakersAV Cables and Jacks Connecting AV componentsAbout AV Connections Hdmi cableAudio Return Channel ARC function Connecting Components with HdmiJack Components Assignable How to record a video source Connecting Your ComponentsJack/Port Components Assignable System On/Auto Power On Connecting Onkyo uComponentsConnecting a Recording Component Remote ControlBe careful not to injure yourself when using thumbtacks Connecting the AntennasConnecting the Power Cord Plug the power cord into an AC wall outletTurning Off Turning On/Off the AV ReceiverTurning On AV receiver comes on, the display lightsPlayback Controlling Contents of USB or Network DevicesSelecting the Language for the Onscreen Setup Menus Playing the Connected ComponentPlaying an iPod/iPhone via USB Understanding Icons on the DisplayEnter Playing a USB Device Listening to Internet RadioRegistering My Favorites*1 Listening to Other Internet RadioTop menu of Internet Radio Playing Music Files on a Server Windows Media Player 11 SetupWindows Media Player 12 Setup Remote PlaybackTuning into Radio Stations Using Remote PlaybackUsing the Tuner Listening to AM/FM RadioUsing RDS Chinese models Presetting AM/FM StationsMode Finding Stations by Type PTY Displaying Radio Text RTListening to Traffic News TP Using the Automatic Speaker Setup Using Basic FunctionsMeasurement procedure ` Cancel When you’ve finished making the settings, pressWhen prompted, repeat step Use q/wto select a target, and use e/rto change the settingError Messages Changing the Speaker Setup ManuallyUsing the Listening Modes Selecting Listening ModesExplanatory Notes Following audio formats are supported by the listening modeAbout Listening Modes Input SourceOnkyo-Original DSP Listening Modes Listening ModesDolby Pro Logic IIz Resolution AudioDolby Pro Logic HeightListening Mode Description Input Speaker Source Layout Neo6 Audyssey DSX *8Using the Sleep Timer Using the Home MenuSetting the Display Brightness Changing the Input Display Using the Music OptimizerDisplaying Source Information VCR/DVRRecording Using HeadphonesMuting the AV Receiver AV RecordingCommon Procedures in Setup Menu Advanced SetupOn-screen Setup Menus Explanatory NotesMonitor Out ResolutionInput/Output Assign Hdmi InputComponent Video Input Speaker SetupSpeaker Settings Digital Audio InputSpeakers Type Front Powered ZoneSpeaker Impedance Chinese models FrontDouble Bass Speaker DistanceLevel Calibration UnitMultiplex/Mono Audio AdjustDolby Audyssey DSX Source SetupTheater-Dimensional AudysseyDynamic Volume Reference LevelSync IntelliVolumeName Edit Picture Adjust Charge Mode Audio SelectorMiscellaneous Listening Mode PresetVolume Setup DTS/DTS-ES/DTS-HDOSD Setup Tuner Hardware SetupRemote ID Auto Standby Network Firmware UpdateDhcp Lock Setup Remote Controller SetupUsing the Audio Settings Late Night Late Night CinemaFILTERMusic Optimizer Music OptimizerZone Connecting Your Zone 2 Speakers Directly to the AV receiverConnecting the Zone Speakers to an Additional Amplifier Making Zone 2 ConnectionsControlling Zone 2 Components Adjusting the Volume for ZoneOperating on the remote controller Muting ZoneIPod/iPhone Playback via Onkyo Dock Using the Onkyo DockUP-A1 Dock With the RI Control Controlling Your iPod/iPhoneRI Dock Without the RI ControlAvailable buttons Entering Remote Control Codes Preprogrammed Remote Control CodesLooking up for Remote Control Code Controlling Other ComponentsResetting the Remote Controller Remote Control Codes for Onkyo Components Connected via uResetting Remote Mode Buttons Controlling Other ComponentsGuide SetupButtons Input TV VOL q / w SearchPower TroubleshootingAudio Video Tuner Remote ControllerUP-A1 Dock for iPod/iPhone Music Server and Internet Radio RecordingZone USB Device PlaybackOthers Important Note Regarding Video Playback Component Video OUTConnecting to the Network Network/USB FeaturesNetwork Requirements Server playback Server RequirementsUSB Device Requirements Remote playbackSupported Audio File Formats About DlnaUpdating the Firmware via Network Firmware UpdateUpdate procedure Before you startError Code Description TroubleshootingErrors during an update via network Updating the Firmware via USBErrors during an update via USB Signal Selection Connection Tips and Video Signal PathVideo Connection Formats Audio Connection Formats OUTSupported Audio Formats About HdmiAbout Copyright Protection About p-compatible components Using an RIHD-compatible TV, Player, or RecorderOperations that can be performed with Connection Confirm the settings How to connect and setupConfirm the connecting and setting Operate with the remote controllerVideo Section SpecificationsAmplifier Section General Tuner SectionOutput Video Resolution ChartAvailable resolutions 3840 ⋅ 2160 24/25/30 Hz 1080p 1080i 720p 480p/576p 480i/576i Component CompositeOnkyo Europe Electronics GmbH Onkyo Europe Electronics GmbH UK Branch

HT-RC360 specifications

The Onkyo HT-RC360 is a versatile home theater receiver that has garnered attention for its impressive features and solid performance. Designed to elevate the home entertainment experience, this receiver combines cutting-edge technology with user-friendly functionality.

One of the standout features of the HT-RC360 is its support for high-definition audio formats. It is equipped with Dolby TrueHD and DTS-HD Master Audio decoding, allowing users to enjoy lossless surround sound that delivers a cinema-like experience from the comfort of their own homes. This ensures that every detail of the audio is preserved, making movies, music, and video games come to life with clarity and depth.

The receiver boasts a robust 7.2 channel amplification system, delivering a total power output of 100 watts per channel. This powerful amplification allows the HT-RC360 to drive a variety of speaker configurations, making it suitable for different room sizes and acoustics. Furthermore, the inclusion of Audyssey MultEQ room correction technology allows users to optimize the sound experience based on their specific room conditions. This results in balanced sound that is tailored to the acoustic characteristics of the space.

Connectivity options are abundant with the HT-RC360. It features multiple HDMI inputs and outputs, supporting 3D video and 4K passthrough, which is essential for modern home theater setups. Users can easily connect various devices, including Blu-ray players, gaming consoles, and streaming devices, making it a central hub for all their entertainment needs. Additionally, the receiver comes with analog and digital audio inputs, allowing flexibility in connecting legacy devices.

Another noteworthy characteristic of the Onkyo HT-RC360 is its built-in compatibility with various streaming services. It supports technologies such as Spotify Connect, allowing users to stream their favorite music directly from their smartphones or tablets. This feature enhances the convenience for users who prefer to access music libraries online without the need for physical media.

Overall, the Onkyo HT-RC360 is a remarkable home theater receiver that combines high-quality audio performance with modern connectivity features. Its powerful amplification, advanced audio decoding, and versatile streaming capabilities make it an excellent choice for anyone looking to create an immersive home entertainment experience. With the HT-RC360, users can enjoy movies, music, and gaming like never before.
Top Page Image Contents