Maintenance, Troubleshooting | Humminbird ICE 45, ICE 55, ICE 35

Gain	24
Noise Rejection	25
Beam	26
Color (ICE 55 Only)	27
Palette 1 (ICE 35/45/55)	27
Palette 2 (ICE 55 Only)	28
Palette 3 (ICE 55 Only)	29
Target (ICE 55 Only)	30
Dual Mode Key Functions	31
Maintenance	32
ICE Flasher Series™ Maintenance	32
Transducer Maintenance	32
Troubleshooting	33
ICE Flasher Series™ Fishfinder Doesn't Power Up	33
No Bottom Reading on the Display	33
No Continuous Depth Display in Very Shallow Water	33
Screen Fades, Images are Not Sharp	33
2-Year Limited Warranty	34
Humminbird® Service Policy	35
Returning Your Unit for Service	36
Specifications	37
Contact Humminbird®	40

NOTE: Some features discussed in this manual require a separate purchase, and some features are only available on certain models. Please read the manual carefully in order to understand the full capabilities of your model. You can visit our website at www.humminbird.com to order accessories online or contact our Customer Resource Center at 1-800-633-1468.

iv

Image 4

Humminbird ICE 45, ICE 55, ICE 35 manual Maintenance, Troubleshooting, Year Limited Warranty Humminbird Service Policy

Contents

ICE 35, ICE 45, ICE Installation and Operations Manual Thank YOU Table of Contents Maintenance TroubleshootingYear Limited Warranty Humminbird Service Policy Specifications Contact Humminbird HOW Sonar Works Real Time SonarPage Page HOW ICE Flashers Work Installation Overview ICE Flasher Series Base Assembly Assembling the Transducer Storage PostsSlide one spring over each flat-headscrew and set aside Repeat steps 2-5 for the second cable retentionarm Installing the Handle Onto the Base Sliding in the Handle Assembling the Base and Handle Assembling the Control Head to the Base and Handle Repeat for the other side Connecting the Power Cable ICE Flasher Series AssemblyCharging and Installing the Battery Slide the Battery Terminal Adapter over each spade terminal Spade Battery Terminals Assembling the Portable Bag ICE 55 Only Transducer Installation Testing the Transducer Prior to InstallationThis procedure you willassemblethe transducerand float Assembling the Transducer and Float Ice Layer Float Transducer Connecting the Transducer Cable Storing the Transducer Test and Finish the Installation Getting Started Using Your ICE Flasher Series Fishfinder Simulator Powering UP the Control HeadWHAT’S on the Flasher Dial Page WHAT’S on the Active Display ICE 45/55 only KEY Functions POWER/RANGE Dial Selection Dial Range scales for the ICE 35 are shown below Zoom Gain Noise Rejection ICE Beam = 455 kHz, and Wide = 240 kHz Default = Wide ICE 45/55Press the Beam key to toggle between 240 kHz and 455 kHz Palette1 ICE 35/45/55 See Palette 1, Palette 2, or Palette 3 for more information Palette2 ICE 55 Only Palette3 ICE 55 Only Orange Target ICE 55 Only Dual Mode KEY Functions ICE Flasher Series Maintenance MaintenanceTransducer Maintenance Troubleshooting ICE Flasher Series Fishfinder Doesn’t Power Up Year Limited Warranty Humminbird Service Policy Returning Your Unit for Service Specifications Which your product was purchased Page Contact Humminbird By e-mail