Selection Dial | Humminbird ICE 35, ICE 55, ICE 45 instruction

Range scales for the ICE 35 are shown below:

Middle ring: x2 Scale

Inner ring: x4 Ring

Outer Ring: x1 and x10. When set to x10, add 0 behind numbers shown on ring

SELECTION DIAL

The Selection dial allows you to set levels for the many functions on your ICE Flasher Series™ control head. To use the Selection dial: Press a function key, such as Gain. Then, turn the Selection dial to choose a setting for that function. Press the Selection dial to complete your selection.

NOTE: If you turn the Selection dial without pressing a function key first, it will default to the Gain function.

22

Image 26

Humminbird ICE 55, ICE 45 manual Selection Dial, Range scales for the ICE 35 are shown below

Contents

ICE 35, ICE 45, ICE Installation and Operations Manual Thank YOU Table of Contents Year Limited Warranty Humminbird Service Policy MaintenanceTroubleshooting Specifications Contact Humminbird HOW Sonar Works Real Time SonarPage Page HOW ICE Flashers Work Installation Overview Slide one spring over each flat-headscrew and set aside ICE Flasher Series Base AssemblyAssembling the Transducer Storage Posts Repeat steps 2-5 for the second cable retentionarm Installing the Handle Onto the Base Sliding in the Handle Assembling the Base and Handle Assembling the Control Head to the Base and Handle Repeat for the other side Charging and Installing the Battery ICE Flasher Series AssemblyConnecting the Power Cable Slide the Battery Terminal Adapter over each spade terminal Spade Battery Terminals Assembling the Portable Bag ICE 55 Only This procedure you willassemblethe transducerand float Transducer InstallationTesting the Transducer Prior to Installation Assembling the Transducer and Float Ice Layer Float Transducer Connecting the Transducer Cable Storing the Transducer Test and Finish the Installation Getting Started Using Your ICE Flasher Series Fishfinder WHAT’S on the Flasher Dial Powering UP the Control HeadSimulator Page WHAT’S on the Active Display ICE 45/55 only KEY Functions POWER/RANGE Dial Selection Dial Range scales for the ICE 35 are shown below Zoom Gain Noise Rejection ICE Press the Beam key to toggle between 240 kHz and 455 kHz = 455 kHz, and Wide = 240 kHz Default = Wide ICE 45/55Beam Palette1 ICE 35/45/55 See Palette 1, Palette 2, or Palette 3 for more information Palette2 ICE 55 Only Palette3 ICE 55 Only Orange Target ICE 55 Only Dual Mode KEY Functions Transducer Maintenance MaintenanceICE Flasher Series Maintenance Troubleshooting ICE Flasher Series Fishfinder Doesn’t Power Up Year Limited Warranty Humminbird Service Policy Returning Your Unit for Service Specifications Which your product was purchased Page Contact Humminbird By e-mail